Dymax Light-Welder PC-3 / PC-3D Medium Intensity UV Spot Lamp
  • Dyamx_Light_Welder_PC_3_View1
  • Dyamx_Light_Welder_PC_3_View2
  • Dyamx_Light_Welder_PC_3_View3
  • Dyamx_Light_Welder_PC_3_View4

Dymax Light-Welder PC-3 / PC-3D Medium Intensity UV Spot Lamp

Features

  • Wand Lamp/Dispenser Combinations
  • Up to 2,000 mW/² Intensity
  • 2,3, or 4 Split Wand Configurations

View our selection of these items below.




Contact Us
Share:



This Dymax Light-Welder PC-3D Medium Intensity UV Spot Lamp is used and in excellent condition. The remaining life of the bulb in this unit is unknown. Replacement lamps/bulbs Part Number: 35003

The PC-3D spot-light dispenser combination allows a single operator to dispense and cure adhesive.

Lamp Part Number: 35003 (120 VAC)

Configuration:
• Accepts Standard 10 and 30 cc Syringes
• Dispenser Timer Range: .5 to 3 Seconds
• Manual or Timed Modes Provided for Shutter and Adhesive Dispensing
• Adjustable Vacuum Draw Back
• 0 to 120 psi Pressure Regulator with Dial Gauge
• Output Power: 50 Watt
• Intensity in the UVA Range (320 - 390 nm): Up to 2,000 mW/cm²
• Dimensions of Illuminated Area: Up to 50" in diameter
• Foot Switch Included
• Fiber Optical Cable Sold Separately







This Dymax Light-Welder PC-3 Medium Intensity UV Spot Lamp is used and in excellent condition. Lamp/Bulb is sold separately. Please contact manufacturer for replacement lamps/bulbs, Part Number 35003.

Part Number: 35350 (115 VAC)

Configuration:
• Output Power: 50 Watt
• Intensity in the UVA Range: Up to 2,000 mW/²
• Dimensions of Illuminated Area: Up to 50" in diameter
• Foot Switch Included
• Fiber Optical Cable Sold Separately




  • Description
  • Tech Specs
  • Datasheets / Manuals 
Contact Us
Share:

Description

The Light-Welder PC-3 is a medium intensity UV/visible light curing lamp used for pinpoint curing of UV adhesives, coatings and potting materials. Light is generated by the lamp in the housing and transmitted through a flexible liquid lightguide that emits a 5 mm diameter spot of UV/visible light for precise curing. The lightguide can be hand-held for complete mobility or clamped into position on assembly equipment or work stations for repetitive operations. The PC-3 is ideal for wire tacking, coil terminating, shallow potting and disk drive applications for the electronics, aerospace and medical device assembly industries. The lamp is user friendly, easy to operate and cost effective.

The PC-3 consists of a housing containing a 50 watt power supply, circuit protection, lamp/reflector assembly, cooling fan, lightguide mount, non-resetable hour meter and shutter system. Electric shutters are supplied with timed and manual shutter operating modes. The lightguide is separate and plugs into the mount. Light is not emitted from the unit when the light guide is removed. A separate filter mounts on the output end of the light guide to reduce visible light output where desired. Lamps are rated at 500 hours of life, however, a useful life of 1,000 hours can be expected for most applications.

Product Family: PC-3, PC-3D, PC 3, PC 3D, PC3, PC3D
Contact Us
Share:

Specifications

Output Power 50 Watt
Intensity in the UVA range (320-390 nm*) 2,000 mW/cm²
Dimensions of Illuminated Area (standard 5 mm light guide) Up to .50" in diameter (cm)
Input Power Requirements 100/115/230 VAC @ 50/60 Hz (customer specified)
Weight 10 lbs. (4.54 kg)
Liquid Lightguide Dimensions 1 m L x 5 mm diameter (1.5 and 0.5 m L optional)
Overall Dimensions 7.5" L x 6.5" W x 9.75" H
(19.05 cm x 16.51 cm x 24.76 cm)
Timer Operated Shutter 0-50 seconds with analog timer
Part Numbers 35350 (115V 50/60 Hz)
35936 (230V 50/60 Hz)


Contact Us
Share:

Resources

Manuals, Datasheets, Drivers, Links

Dymax Light-Welder PC-3 Datasheet (pdf) 
Link to Dymax Website