IKA Accessories
  • IKA_Labworldsoft_Basic_View1
  • IKA_C5041_CalWin_Basic_View1
  • IKA_RH_3_Strap_Clamp_View1
  • IKA_PET_Soft_Basic_View1

IKA Accessories

Features

  • Miscellaneous Parts
  • Wide Range of Equipment

View our selection of these items below.




Contact Us
Share:



This IKA R360 Holding Fork Kit is used and in excellent condition.

Unit Includes:
• R360 Holding Fork
• R182 Boss Head Clamp





This IKA labworldsoft software is Brand new and includes manufacturer's warranty.

With this laboratory software, you can network up to 64 laboratory devices simultaneously via one PC. That makes the automation of your laboratory experiments and processes possible. Measurements and processes may be run independently from one another. This helps to avoid long waits and you increase your productivity.

The communication between PC and laboratory device is performed via the serial interface RS 232 (COM1 or COM2). With the help of plug-in cards and Ethernet RS 232 servers, up to 64 laboratory devices can be used simultaneously via one PC. All laboratory instruments can be controlled independently from each other and the measured values (speed, temperature, torque, pH, etc.) can be documented separately.





This IKA C 5041 CalWin plus is Brand new and includes manufacturer's warranty.

PC control and evaluation software for all IKA calorimeters (C 200, C 2000, C 5000, C 7000, C 4000). Requires a PC running any of the following operating systems: Windows 95 / 98 / ME / NT / 2000 or XP, and at least one free serial interface and 50 MB of available disk space.

• Control, monitor and view working procedures
• Print and save measurement protocols
• Identify and record samples
• Administration of sample racks
• Flexible administration and evaluation of calibrations
• Flexible administration and grouping of measurements
• Printing and saving calibration and result protocols suitable for certification
• Library functions
• Data transfer through COM to EXCEL and ACCESS
• Preprocessed work sheets for EXCEL (configarable by the user)






This IKA C 5040 CalWin is Brand new and includes manufacturer's warranty.

PC control and evaluation software for all IKA® calorimeters (C 200, C 2000, C 5000, C 7000, C 4000). Requires a PC running any of the following operating systems: Windows 95 / 98 / ME / NT / 2000 or XP, and at least one free serial interface and 50 MB of available disk space.

• Control, monitor and view working procedures
• Print and save measurement protocols
• Identify and record samples
• Administration of sample racks C 5020
• Flexible administration and evaluation of calibrations
• Flexible administration and grouping of measurements
• Printing and saving calibration and result protocols suitable for certification
• Library functions
• Data transfer through COM to EXCEL and ACCESS
• Preprocessed work sheets for EXCEL (configarable by the user)






This IKA PET Soft Software is Brand new and includes manufacturer's warranty.

IKA PETsoft is a user-friendly program for the automatic recording, analysis and management of gravimetric measurements for pipette calibration. It is suitable for single and multi-channel pipettes with fixed and variable volumes.

• Testing in accordance with DIN EN ISO 8655
• Automatic transfer of measurements from scales
• Automatic correction of environmental air pressure and temperature conditions
• Master data for over 580 pipettes by other manufacturers already stored
• Inventory of individual pipettes
• Date-controlled monitoring of calibration cycles
• Measuring results saved in a database
• Log according to GLP guidelines with details of all individual measurements, average, accuracy and precision.
• Compatible with all Microsoft Win32 operating systems (Win95/98/ME/NT/2000/XP etc.)
• Extensive online help






This IKA ETS-D5 Electronic Contact Thermometer is Brand new and includes manufacturer's warranty.

• Optimised PID Control
• Reset Function
• Stainless Steel Sensor
• With 3 patented operating modes

IKA ETS-D5 Electronic Contact Thermometer Datasheet (pdf)

Ident. No. 3378000





This IKA H 38 Holding Rod is Brand new and includes manufacturer's warranty.

The IKA H 38 Holding Rod is for fastening ETS-D5 or ETS-D6 to the support rod H 16 V.

Ident. No. 3547700





This IKA ETS-D6 Electronic Contact Thermometer is Brand new and includes manufacturer's warranty.

• Optimised PID control
• Reset Function
• Integrated pH Measuring Instrument
• For All Magnetic Stirrers with Contact Thermometer Bushing According to DIN 12878

IKA ETS-D6 Electronic Contact Thermometer Datasheet (pdf)

Ident. No. 3378100





This IKA H 16.1 Extension is Brand new and includes manufacturer's warranty.

This IKA H 16.1 Extension is for work with bath attachment over 180 mm Ø.

IKA H16.1 Extension Datasheet (pdf)

Ident. No. 5000500





This PT 1000.70 Temperature Sensor is Brand new and includes manufacturer's warranty.

This PT 1000.70 Temperature Sensor is a glass-coated temperature sensor for work with aggressive media such as acid and alkaline solutions.

IKA PT 1000.70 Temperature Sensor Datasheet (pdf)

Ident. No. 3736000





This PT 1000.60 Temperature Sensor is Brand new and includes manufacturer's warranty.

This PT 1000.60 Temperature Sensor is a glass-coated temperature sensor for work with aggressive media such as acid and alkaline solutions.

IKA PT 1000.60 Temperature Sensor Datasheet (pdf)

Ident. No. 3516800





This IKA H 100 Protective Cover is Brand new and includes manufacturer's warranty.

This IKA H 100 Protective Cover is for RCT basic s.c. (3380000), included with the magnetic stirrer. Resistant to most acids, alkaline solutions and organic solvents.

IKA H 100 Protective Cover Datasheet (pdf)

Ident. No. 3661000





This IKA H 16 V Support Rod is Brand new and includes manufacturer's warranty.

This IKA H 16 V Support Rod is a stainless steel support rod for all magnetic stirrers with M 10 threaded bushing.

IKA H 16 V Datasheet (pdf)

Ident. No. 3661000





This IKA H 44 Boss Head Clamp is Brand new and comes with manufacturer's warranty.

This IKA H 44 Boss Head Clamp is for fastening the holding rod H 38 to the support rod H 16 V.

IKA H 44 Boss Head Clamp Datasheet (pdf)

Ident. No. 2437700





This H 15 Bath Attachment is Brand new and comes with manufacturer's warranty.

This H 15 Bath Attachment is a stainless steel bath attachment, suitable for tempering 0.5 and 1 l flasks.

IKA H 15 Bath Attachment Datasheet (pdf)

Ident. No. 0551300





This H 28 Bath Attachment is Brand new and comes with manufacturer's warranty.

This H 28 Bath Attachment is a low stainless steel bath attachment, suitable as a sand bath basin.

IKA H 28 Datasheet (pdf)

Ident. No. 2167400





This H29 Oil Bath Attachment is Brand new and comes with manufacturer's warranty.

The oil bath attachments H 29 and H 30 can be used as oil baths together with an IKAMAG® magnetic stirrer with heating or with an IKATHERM heating plate having a diameter of 135 mm.

• Positioning border prevents sliding on the heating plate
• Safety grip protects from bath attachment burns
• Easy cleaning
• The bath attachments can only be used as an oil bath

IKA H 29 Oil Bath Datasheet (pdf)

Ident. No. 2829500





This IKAFLON 10 Magnetic Sirring Bar is Brand new and comes with manufacturer's warranty.

• Round
• PTFE-coated

IKA IKAFLON 10 Magnetic Stirring Bar Datasheet (pdf)

Ident. No. 1572000





This IKAFLON 15 Magnetic Sirring Bar is Brand new and comes with manufacturer's warranty.

• Round
• PTFE-coated

IKA IKAFLON 15 Magnetic Stirring Bar Datasheet (pdf)

Ident. No. 1572100





This IKAFLON 20 Magnetic Sirring Bar is Brand new and comes with manufacturer's warranty.

• Round
• PTFE-coated

IKA IKAFLON 20 Magnetic Stirring Bar Datasheet (pdf)

Ident. No. 1572200





This IKAFLON 25 Magnetic Sirring Bar is Brand new and comes with manufacturer's warranty.

• Round
• PTFE-coated

IKA IKAFLON 25 Magnetic Stirring Bar Datasheet (pdf)

Ident. No. 1572300





This IKAFLON 30 Magnetic Sirring Bar is Brand new and comes with manufacturer's warranty.

• Round
• PTFE-coated

IKA IKAFLON 30 Magnetic Stirring Bar Datasheet (pdf)

Ident. No. 1572400





This IKAFLON 40 Magnetic Sirring Bar is Brand new and comes with manufacturer's warranty.

• Round
• PTFE-coated

IKA IKAFLON 40 Magnetic Stirring Bar Datasheet (pdf)

Ident. No. 1572500





This IKAFLON 50 Magnetic Sirring Bar is Brand new and comes with manufacturer's warranty.

• Round
• PTFE-coated

IKA IKAFLON 50 Magnetic Stirring Bar Datasheet (pdf)

Ident. No. 1572600





This IKAFLON 80 Magnetic Sirring Bar is Brand new and comes with manufacturer's warranty.

• Round
• PTFE-coated

IKA IKAFLON 80 Magnetic Stirring Bar Datasheet (pdf)

Ident. No. 1572800





This TRIKA 25 Magnetic Sirring Bar is Brand new and comes with manufacturer's warranty.

Triangular, PTFE-coated, especially suited for stirring liquids which have a low solids content and where sedimentation is not desired.

IKA TRIKA 25 Magnetic Stirring Bar Datasheet (pdf)

Ident. No. 0356600





This TRIKA 40 Magnetic Sirring Bar is Brand new and comes with manufacturer's warranty.

Triangular, PTFE-coated, especially suited for stirring liquids which have a low solids content and where sedimentation is not desired.

IKA TRIKA 40 Magnetic Stirring Bar Datasheet (pdf)

Ident. No. 0356500





This IKA RS 1 Set of Magnetic Stirring Bars is Brand new and comes with manufacturer's warranty.

Consisting of the IKAFLON® and TRIKA® Magnetic stirring bars:
• IKAFLON 10 Magnetic stirring bar
• IKAFLON 15 Magnetic stirring bar
• IKAFLON 20 Magnetic stirring bar
• IKAFLON 25 Magnetic stirring bar
• IKAFLON 30 Magnetic stirring bar
• IKAFLON 40 Magnetic stirring bar
• IKAFLON 50 Magnetic stirring bar
• IKAFLON 80 Magnetic stirring bar
• TRIKA 25 Magnetic stirring bar
• TRIKA 42 Magnetic stirring bar

IKA RS 1 Set of Magnetic Stirring Bars Datasheet (pdf)

Ident. No. 1358600





This IKA RSE Stirring Bar Remover is Brand new and comes with manufacturer's warranty.

This IKA RSE Stirring Bar Remover is for all stirring bars up to 80 mm in length, PTFE-coated.

IKA RES Stirring Bar Remover Datasheet (pdf)

Ident. No. 1293100





This IKA R 1342 4 Bladed Propeller Stirrer is Brand new and comes with manufacturer's warranty.

This IKA R 1342 4 Bladed Propeller Stirrer is a standard stirring element. For drawing the material to be mixed from the top to the bottom. Local shearing forces. Generates axial flow in the vessel. Used at medium to high speeds.

IKA R 1342 Propeller Stirrer Datasheet (pdf)

Ident. No. 0741000





This IKA R 1381 3-Bladed Propeller Stirrer is Brand new and comes with manufacturer's warranty.

This IKA R 1381, 3-Bladed Propeller Stirrer is a standard stirring element. For drawing the material to be mixed from the top to the bottom. Local shearing forces. Generates axial flow in the vessel. Used at medium to high speeds.

IKA R 1381 Propeller Stirrer Datasheet (pdf)

Ident. No. 1296000





This IKA R 1382 3-Bladed Propeller Stirrer is Brand new and comes with manufacturer's warranty.

This IKA R 1382, 3-Bladed Propeller Stirrer is for drawing the material to be mixed from the top and the bottom. Minimum shearing forces. Used at medium to high speeds.

IKA R 1382 Propeller Stirrer Datasheet (pdf)

Ident. No. 125900





This IKA R 1311 Turbine Stirrer is Brand new and comes with manufacturer's warranty.

This IKA R 1311 Turbine Stirrer is for drawing the material to be mixed from above. Minimum shearing forces. Minimum danger of injury when contact is made with vessel. Minimum shearing forces. Used at medium to high speeds.

IKA R 1311 Turbine Stirrer Datasheet (pdf)

Ident. No. 2332900





This IKA R 1312 Turbine Stirrer is Brand new and comes with manufacturer's warranty.

This IKA R 1312 Turbine Stirrer is for drawing the material to be mixed from above. Minimum shearing forces. Minimum danger of injury when contact is made with vessel. Minimum shearing forces. Used at medium to high speeds.

IKA R 1312 Turbine Stirrer Datasheet (pdf)

Ident. No. 2333000





This IKA R 1303 Dissolver Stirrer is Brand new and comes with manufacturer's warranty.

This IKA R 1303 Dissolver Stirrer is for radial flow, for drawing the material to be mixed from the top and the bottom. High turbulence, high shearing forces. Particle reduction. Used at medium to high speeds.

IKA 1303 Dissolver Stirrer Datasheet (pdf)

Ident. No. 2746700





This IKA R 1352 Dissolver Stirrer is Brand new and comes with manufacturer's warranty.

This IKA R 1352 Dissolver Stirrer is for radial flow, for drawing the material to be mixed from the top and the bottom. High turbulence, high shearing forces. Particle reduction. Used at medium to high speeds.

IKA R 1352 Centrifugal Stirrer Datasheet (pdf)

Ident. No. 0756900






This IKA R 1303 Anchor Stirrer is Brand new and comes with manufacturer's warranty.

This IKA R 1303 Anchor Stirrer is for tangential flow, high shearing rate at edges, minimum deposits on the vessel wall. Used at low speeds. Polymer reactions, even distribution of high mineral contents in liquids. The ideal stirrer for medium to highly viscous fluids.

IKA R 1330 Anchor Stirrer Datasheet (pdf)

Ident. No. 2022300






This IKA R 1332 Anchor Stirrer is Brand new and comes with manufacturer's warranty.

This IKA R 1332 Anchor Stirrer is for tangential flow, high shearing rate at edges, minimum deposits on the vessel wall. Used at low speeds. Polymer reactions, even distribution of high mineral contents in liquids. The ideal stirrer for medium to highly viscous fluids.

IKA R 1332 Anchor Stirrer Datasheet (pdf)

Ident. No. 2343700






This IKA R 1335 Kneading Stirrer is Brand new and comes with manufacturer's warranty.

This IKA R 1335 Kneading Stirrer is for tangential flow with oscillating compacting between the kneading surfaces. Minimum deposits on vessel. Used at low speeds.

IKA R 1335 Kneading Stirrer Datasheet (pdf)

Ident. No. 2022500






This IKA FK 1 Flexible Coupling is Brand new and comes with manufacturer's warranty.

This IKA FK 1 Flexible Coupling is Required for stirring tasks using glass stirring rods. The flexible coupling compensates for any structural variances.

IKA FK 1 Flexible Coupling Datasheet (pdf)

Ident. No. 2336000






This IKA R 301 Stirring Shaft Protection is Brand new and comes with manufacturer's warranty.

This IKA R 301 Stirring Shaft Protection prevents potential injuries at the rotating shafts and stirring elements. Can be directly attached to the EUROSTARs, RW 16 basic, RW 28 basic and the RW 20 stirring motors.

IKA R 301 Stirring Shaft Protection Datasheet (pdf)

Ident. No. 2603000






This IKA R 1825 Stirring Shaft Protection is Brand new and comes with manufacturer's warranty.

IKA R 1825 Stirring Shaft Protection Datasheet (pdf)

Ident. No. 3160000






This IKA R 1826 Stirring Shaft Protection is Brand new and comes with manufacturer's warranty.

IKA R 1826 Plate Stand Datasheet (pdf)

Ident. No. 3160100






This IKA 182 Boss Head Clamp is Brand new and comes with manufacturer's warranty.

Ident. No. 2657700






This IKA 8014200 DZM Control.o Revolution Counter is Brand new and comes with manufacturer's warranty.

This IKA DZM Control.o Revolution Counter is for Connection of an opto-electronic sensor enables measurement of the speed of rotating shafts from 0 - 50,000 rpm. The signals received are displayed on the monitor. This enables all IKA overhead stirrers and dispersing instruments to be retrofitted with a speed display, thereby allowing reproducible work. An RS 232 interface allows the values to be recorded digital on a PC. An analog output signal for a recorder is also available. The monitor can be used as a table-top device or mounted on a stand rod.

IKA DZM Control.o Revolution Counter Datasheet (pdf)

Ident. No. 8014200






This IKA PCI 8.2 Plug-In Card is Brand new and comes with manufacturer's warranty.

This IKA PCI 8.2 Plug-In Card is for mounting in the PC to connect up to 8 instruments simultaneously. Plug-in cards for up to 64 instruments available on request.

IKA PCI 8.2 Plug-In Card Datasheet (pdf)

Ident. No. 8017500






This IKA AS 4000.2 Fixing Clip Attachment is Brand new and comes with manufacturer's warranty.

This IKA AS 4000.2 Fixing Clip Attachment is for shaking flasks, Erlenmeyer flasks and bottles with a round crosssection (without fixing clips).

IKA AS 4000.2 Fixing Clip Datasheet (pdf)

Ident. No. 3710100






This IKA IKA PT 1000.60 Temperature Sensor is Brand new and comes with manufacturer's warranty.

This IKA PT 1000.60 Temperature Sensor is made of stainless steel.

IKA PT 1000.60 Temperature Sensor Datasheet (pdf)

Ident. No. 3710100






This IKA AS 4000.3 Dish Attachment is Brand new and comes with manufacturer's warranty.

This IKA AS 4000.3 Dish Attachment is for smooth shaking operations in the low viscosity range, e.g. for cell cultures, nutrient media in Petri dishes, culture bottles and vessels with a low center of gravity. With integrated slip-resistant foil (PP).

IKA 4000.3 Dish Attachment Datasheet (pdf)

Ident. No. 3710100






This IKA AS 4000.3 Universal Attachment is Brand new and comes with manufacturer's warranty.

This IKA AS 4000.3 Universal Attachment is for various types of vessels. Infinitely variable clamping rolls allow universal adaptation to the vessels.

IKA AS 4000.1 Universal Attachment Datasheet (pdf)

Ident. No. 8022200






This IKA AS 260.2 Fixing Clip Attachment is Brand new and comes with manufacturer's warranty.

This IKA AS 260.2 Fixing Clip Attachment is for for shaking flasks, Erlenmeyer flasks and bottles with a round crosssection (without fixing clips).

IKA AS 260.2 Fixing Clip Attachment Datasheet (pdf)

Ident. No. 3115500






This IKA AS 260.5 Separating Funnel Attachment is Brand new and comes with manufacturer's warranty.

This IKA AS 260.5 Separating Funnel Attachment is for shaking out, salting out, extracting, eluting, enriching. The 3 clamping rolls (included in delivery) are height-adjustable for adaption to different separating funnel sizes. The separating funnels are secured with O-rings (5 O-rings included).

IKA AS 260.5 Separating Funnel Attachment Datasheet (pdf)

Ident. No. 3120900






This IKA AS 260.1 Universal Attachment is Brand new and comes with manufacturer's warranty.

This IKA AS 260.1 Universal Attachment is for various types of vessels. Infinitely variable clamping rolls allow universal adaptation to the vessels.

IKA AS 260.1 Universal Attachment Datasheet (pdf)

Ident. No. 8017400






This IKA AS 260.3 Dish Attachment is Brand new and comes with manufacturer's warranty.

This IKA AS 260.3 Dish Attachment is for for various types of vessels. Infinitely variable clamping rolls allow universal adaptation to the vessels.

IKA AS 260.1 Universal Attachment Datasheet (pdf)

Ident. No. 8017400






This IKA AS 2.5 Fixing Clips is Brand new and comes with manufacturer's warranty.

IKA AS 2.5 Fixing Clips Datasheet (pdf)

Ident. No. 1234700






This IKA AS 2.4 Fixing Clips is Brand new and comes with manufacturer's warranty.

IKA AS 2.4 Fixing Clips Datasheet (pdf)

Ident. No. 1234600






This IKA AS 2.3 Fixing Clips is Brand new and comes with manufacturer's warranty.

IKA AS 2.3 Fixing Clips Datasheet (pdf)

Ident. No. 1234500






This IKA AS 2.2 Fixing Clips is Brand new and comes with manufacturer's warranty.

Ident. No. 1234400






This IKA AS 2.1 Fixing Clips is Brand new and comes with manufacturer's warranty.

IKA AS 2.1 Fixing Clips Datasheet (pdf)

Ident. No. 1234300






This IKA ST-20 Stirring Tube is Brand new and comes with manufacturer's warranty.

IKA AS 2.1 Fixing Clips Datasheet (pdf)

Ident. No. 3703000






This IKA DT-20 Stirring Tube is Brand new and comes with manufacturer's warranty.

IKA DT-20 Fixing Clips Datasheet (pdf)

Ident. No. 3703100






This IKA BMT-20 S Stainless Steel-Ball-Mill Tube is Brand new and comes with manufacturer's warranty.

IKA BMT-20 S Datasheet (pdf)

Ident. No. 3703200






This IKA BMT-20 G Glass-Ball-Mill Tube is Brand new and comes with manufacturer's warranty.

IKA BMT-20 G Glass-Ball-Mill Tube Datasheet (pdf)

Ident. No. 3703300






This IKA ST-50 Stirring Tube is Brand new and comes with manufacturer's warranty.

IKA ST-50 Stirring Tube Datasheet (pdf)

Ident. No. 3699500






This IKA DT-50 Stirring Tube is Brand new and comes with manufacturer's warranty.

IKA ST-50 Stirring Tube Datasheet (pdf)

Ident. No. 3699600






This IKA BMT-50 S Stainless Steel-Ball-Mill Tube is Brand new and comes with manufacturer's warranty.

IKA BMT-50 S Datasheet (pdf)

Ident. No. 3699700






This IKA BMT-50 G Glass-Ball-Mill Tube is Brand new and comes with manufacturer's warranty.

IKA BMT-50 G Datasheet (pdf)

Ident. No. 3699800






This IKA ST-20 Stirring Tube Sterile is Brand new and comes with manufacturer's warranty.

IKA ST-20 Sterile Datasheet (pdf)

Ident. No. 3699800






This IKA DT-20 Stirring Tube Sterile is Brand new and comes with manufacturer's warranty.

IKA DT-20 Sterile Datasheet (pdf)

Ident. No. 3749400






This IKA BMT-20 S Stainless Steel-Ball-Mill Tube Sterile is Brand new and comes with manufacturer's warranty.

IKA BMT-20 S Stainless Sterile Datasheet (pdf)

Ident. No. 3749500






This IKA BMT-50 G Glass-Ball-Mill Tube is Brand new and comes with manufacturer's warranty.

IKA BMT-50 G Datasheet (pdf)

Ident. No. 3699800






This IKA ST-20 Stirring Tube Sterile is Brand new and comes with manufacturer's warranty.

IKA ST-20 Sterile Datasheet (pdf)

Ident. No. 3749300






This IKA DT-20 Stirring Tube Sterile is Brand new and comes with manufacturer's warranty.

IKA DT-20 Sterile Datasheet (pdf)

Ident. No. 3749400






This IKA TC-20 Stirring Tube Sterile is Brand new and comes with manufacturer's warranty.

IKA TC-20 Cover Datasheet (pdf)

Ident. No. 3749400






This IKA R 1389 3-Bladed Propeller Stirrer is Brand new and comes with manufacturer's warranty.

This IKA R 1389, 3-Bladed Propeller Stirrer is for drawing the material to be mixed from the top and the bottom. Minimum shearing forces. Used at medium to high speeds.

IKA RES Stirring Bar Remover Datasheet (pdf)

Ident. No. 2343600





This IKA RH 3 Strap Clamp is Brand new and comes with manufacturer's warranty.

This IKA RH 3 Strap Clamp is for securing vessels against walls or for synchronized rotation during stirring or dispersing.

IKA RES Stirring Bar Remover Datasheet (pdf)

Ident. No. 3008600






This IKA HKD 06.2 Plunger is Brand new and comes with manufacturer's warranty.

This IKA HKD 06.2 Plunger has a double-walled plunger seat, for heating and cooling, which presses down the kneading material by means of spring-action. This considerably improves heat conduction in the measuring kneader. The central supply opening can be closed with a plunger. The HKD 06.2 plunger is not suitable for vacuum operation.

IKA HKD 06.2 Plunger Datasheet (pdf)

Ident. No. 2936000






This IKA HKD 06.10 Kneading Blade is Brand new and comes with manufacturer's warranty.

This IKA HKD 06.10 Kneading Blade is a special lined front kneading blade for viscous, elastic products to prevent dead zones. Alternative to the standard kneading blade.

IKA HKD 06.10 Kneading Blade Datasheet (pdf)

Ident. No. 3134800






This IKA S 50 N-G 45 G Dispersing Element is Brand new and comes with manufacturer's warranty.

This IKA S 50 N-G 45 G Dispersing Element allows a variety of media to be processed. In many cases it is neccessary to use subsequently two dispersing elements, for pre-crushing and fine crushing. The plug-in connectors facilitate the exchange of the dispersing elements.

IKA S 50 N-G 45 G Datasheet (pdf)

Ident. No. 8003000






This IKA S 50 N-G 45 M Dispersing Element is Brand new and comes with manufacturer's warranty.

This IKA S 50 N-G 45 M Dispersing Element allows a variety of media to be processed. In many cases it is neccessary to use subsequently two dispersing elements, for pre-crushing and fine crushing. The plug-in connectors facilitate the exchange of the dispersing elements.

IKA S 50 N-G 45 M Datasheet (pdf)

Ident. No. 8003300






This IKA S 50 N-G 45 F Dispersing Element is Brand new and comes with manufacturer's warranty.

This IKA S 50 N-G 45 F Dispersing Element allows a variety of media to be processed. In many cases it is neccessary to use subsequently two dispersing elements, for pre-crushing and fine crushing. The plug-in connectors facilitate the exchange of the dispersing elements.

IKA S 50 N-G 45 F Datasheet (pdf)

Ident. No. 8003900






This IKA S 18 D-14 G-KS Dispersing Element is Brand new and comes with manufacturer's warranty.

IKA S 18 D-14 G-KS Datasheet (pdf)

Ident. No. 3451900






This IKA S 18 D-14 G-KS Dispersing Element is Brand new and comes with manufacturer's warranty.

IKA S 18 D-14 G-KS Datasheet (pdf)

Ident. No. 3452300






This IKA S 18 / 2-ET 0 Disposable Tube is Brand new and comes with manufacturer's warranty.

IKA S 18 / 2-ET 0 Disposable Tube Datasheet (pdf)

Ident. No. 3452500






This IKA S 18 D - 10G - KS Dispersing Element is Brand new and comes with manufacturer's warranty.

IKA S 18 D-10G-KS Datasheet (pdf)

Ident. No. 3452500






This IKA S 25 D - 14G - KS Dispersing Element Dispersing Element is Brand new and comes with manufacturer's warranty.

IKA S 25 D - 14G - KS Datasheet (pdf)

Ident. No. 3452100






This IKA S 25 D - 14G - KS Dispersing Element Dispersing Element is Brand new and comes with manufacturer's warranty.

IKA S 25 D - 14G - KS Datasheet (pdf)

Ident. No. 3452100






This IKA S 25 D - 10 G - KS Dispersing Element (10pcs) is Brand new and comes with manufacturer's warranty.

Ident. No. 3452200






This IKA S 25 D - 10 G - KS Dispersing Element (5pcs) is Brand new and comes with manufacturer's warranty.

IKA S 25 D - 10G - KS Datasheet (pdf)

Ident. No. 3451800






This IKA S 25 N - 8 G Dispersing Element is Brand new and comes with manufacturer's warranty.

IKA S 25 N - 8 G Datasheet (pdf)

Ident. No. 1024200






This IKA S 25 N - 10 G Dispersing Element is Brand new and comes with manufacturer's warranty.

IKA S 25 N - 10 G Datasheet (pdf)

Ident. No. 0594000






This IKA S 25 N - 18 G Dispersing Element is Brand new and comes with manufacturer's warranty.

IKA S 25 N - 18 G Datasheet (pdf)

Ident. No. 0593400






This IKA S 25 N - 25 G Dispersing Element is Brand new and comes with manufacturer's warranty.

S 25 N - 25 G Datasheet (pdf)

Ident. No. 1713300






This IKA S 25 N - 25 F Dispersing Element is Brand new and comes with manufacturer's warranty.

IKA S 25 N - 25 F Datasheet (pdf)

Ident. No. 1713300






This IKA S 25 N - 25 F Dispersing Element is Brand new and comes with manufacturer's warranty.

IKA S 25 N - 25 F Datasheet (pdf)

Ident. No. 1713300






This IKA S10 D - 7G - KS - 110 Dispersing element is Brand new and comes with manufacturer's warranty.

IKA S 10 D - 7G - KS - 110 Datasheet (pdf)

Ident. No. 1713300






This IKA S 10 N - 10 G Dispersing Element is is Brand new and comes with manufacturer's warranty.

IKA S 10 N - 10 G Datasheet (pdf)

Ident. No. 3370100






This IKA S 10 N - 8 G Dispersing Element is Brand new and comes with manufacturer's warranty.

IKA S 10 N - 8 G Datasheet (pdf)

Ident. No. 3305500






This S10 D - 7G - KS - 65 Dispersing element is Brand new and comes with manufacturer's warranty.

IKA S 10DN - 7 G - KS - 65 Datasheet (pdf)

Ident. No. 3433212






This IKA S10 D - 7G - KS - 65 Dispersing Element is Brand new and comes with manufacturer's warranty.

IKA S 10DN - 7 G - KS - 65 Datasheet (pdf)

Ident. No. 3433222






This S10 D - 7G - KS - 110 Dispersing element is Brand new and comes with manufacturer's warranty.

IKA S 10DN - 7 G - KS - 110 Datasheet (pdf)

Ident. No. 3433225






This IKA H 44 Boss Head Clamp is Brand new and comes with manufacturer's warranty.

IKA H 44 Boss Head Datasheet (pdf)

Ident. No. 2437700






This IKA H 44 Boss Head Clamp is Brand new and comes with manufacturer's warranty.

IKA H 44 Boss Head Datasheet (pdf)

Ident. No. 2437700






This IKA R 104 Stand is Brand new and comes with manufacturer's warranty.

IKA R 104 Stand Datasheet (pdf)

Ident. No. 3386000






This IKA R 200 Clamp is Brand new and comes with manufacturer's warranty.

IKA R 200 Clamp Datasheet (pdf)

Ident. No. 3386000






This IKA 3113200 DTM 12 IKATRON Digital Temperature Measuring Instrument is Brand new and comes with manufacturer's warranty.

This IKA 3113200 DTM 12 IKATRON Digital Temperature Measuring Instrument is For measuring temperatures between -200 °C up to +400 °C.

IKA DTM 12 IKATRON Datasheet (pdf)

Ident. No. 3113200






This IKA HKD 06.2 Plunger is Brand new and comes with manufacturer's warranty.

This IKA VC 2 IKAVAC Vacuum Controller is used to create a controlled partial vacuum in laboratory applications. Typical tasks are the evacuation of desiccators, vacuum apparatus, etc. Solvent recovery rates of up to 99 & are possible if rotary evaporators are used.

IKA VC 2 IKAVAC Vacuum Controller Datasheet (pdf)

Ident. No. 230000






This IKA CC3-308B VPC Heating Circulator Bath is Brand new and comes with manufacturer's warranty.

This IKA CC3-308B is a heating Circulator Bath with housing, bath and all moistened parts are made of stainless steel. With cooling coil for water-cooling, pressure- and suction pump made of industrial plastic material. With adjustable overtemperature protection according to DIN 12876.

IKA CC3-308B vpc Datasheet (pdf)

Ident. No. 3658800





  • Description
  • Tech Specs
  • Datasheets / Manuals 
Contact Us
Share:

Description

Miscellaneous parts for a wide range of equipment
Contact Us
Share:

Specifications