Thermo / Forma Scientific 3193 / 3194 / 3195 / 3196 Water Jacketed Incubators
  • Forma_3193_149644_View1
  • Forma_3193_149644_View2
  • Forma_3193_149644_View3
  • Forma_3193_149644_View4
  • Forma_3193_149644_Open_View1

Thermo / Forma Scientific 3193 / 3194 / 3195 / 3196 Water Jacketed Incubators

Features

  • Precision Thermistor Sensor
  • 5.7 Cubic Feet Per Chamber
  • Microprocessor Controller

View our selection of these items below.




Contact Us
Share:



This Thermo / Forma Scientific 3193 Water Jacketed Incubator is used and in excellent condition.

Configuration:

• Input Voltage: 120 VAC
• Shelves: 1

View Photo with door open.




  • Description
  • Tech Specs
  • Datasheets / Manuals 
Contact Us
Share:

Description

The Thermo / Forma Scientific 3193 / 3194 / 3195 / 3196 Water Jacketed Incubators are 5.7 cubic foot volume incubators. These incubators feature precision thermistor sensors and microprocessor controllers.

Product Family: 3193, 3194, 3195, 3196
Contact Us
Share:

Specifications

TEMPERATURE
Control±0.1°C at +37°C
Range+5°C above ambient to +45°C
SensorPrecision thermistor
ControllerMicroprocessor, proportional
SetpointDigital
DisplayDigital LED
Readability0.1°C
Setability0.1°C
Uniformity±0.2°C
TEMPERATURE SAFETY
SensorThermistor
ControllerIndependent analog electronic
SetpointDigital (tamper resistant adjustment)
Readability0.1°C
Setability0.1°C
CO2
CO2 Gas ControlBetter than ±0.1%
Range0-20%
Inlet Pressure10 PSIG
HEPA Filter0.2 micron, disposable
SensorInfrared
CalibrationAuto-zero
ControllerMicroprocessor
SetabilityDigital LED
Readability0.1%
Setpoint0.1%
Alarm Differential and Delay±1.0% (nominal) approx. 15 minutes
HUMIDITY
HumidityAmbient or 96 RH ±2% at +37°C
Humidity Reservoir1.6 gal. (6 liters)
Humidity Pan1.6 gal. (6 liters) standard
FITTINGS
Fill Port1/4" (.63 cm) FPT
Drain Port3/8" (.95 cm) barbed fitting with manual drain valve
Access Port1.25" (3.17 cm) with neoprene removable plug
CO2 Inlet1/4" (0.63 cm) barbed
UNIT HEAT LOAD (PER CHAMBER)
115V480 BTUH (140 Watt)
220V560 BTUH (160 watt)
SHELVES
Maximum21
Dimensions17.75" (45.10 cm) x 17.75" (45.10cm)
ConstructionStainless steel, perforated, electropolished
Surface Area2.2 sq ft (0.2 sq m) per shelf
Maximum Per Chamber46.2 sq ft (4.2 sq m)
Flatness±.032" (.08 cm) off horizontal plane
ClearanceAdjustable on 1" (2.54 cm centers)
Loading35 lbs (16 kg) slide in and out
50 lbs (23 kg) stationary
CONSTRUCTION
Water Jacket Volume11.5 gallons (43.5 liters)
Interior304 2B stainless steel
ExteriorCold rolled steel
Insulation1-1/2" (3.8 cm) fiberglass
Inner Door1/4" (0.63 cm) fully tempered safety glass with cam action latch
Inner Door GasketNon-porous feather edge silicone
Outer Door GasketFour sided molded magnetic vinyl
FinishPowder coated, durable, easily maintained surface. Salt spray test exceeds 1,000 hours per ASTM standard B117-85
ELECTRICAL
Models 3193/319590-130 VAC 50/60 Hz, 1PH, 4.2 FLA
Models 3194/3196180-260 VAC 50/60 Hz, 1PH, 2.2 FLA
Circuit Breaker5 Amps
Power Switch2 pole
Line Cord8 ft. (2.4 cm)
Data OutputRS232, temperature and CO2
Accessory 120V OutletOne per chamber, 75 watts maximum
CERTIFICATION
CSAStandard 151 except Models 3194/3196
UL ListedStandard 1262 except Models 3194/3196
DIMENSIONS
Exterior (Single)29.12"W x 36.12"H x 24.06"F-B
(73.96 cm x 91.67 cm x 61.12 cm)
Interior19.75"W x 26.75"H x 18.75"F-B
(50.16 cm x 67.94 cm x 47.63 cm)
Volume per Chamber5.7 cu ft (161.4 liters)
Exterior (Stacked)29.12"W x 72.25"H x 24.06"F-B
(73.96 cm x 183.51 cm x 61.12 cm)
WEIGHTS
NetSingle: 235 lbs (107 kg)
Stacked: 470 lbs (213 kg)
Net OperationalSingle: 342 lbs (150 kg)
Stacked: 684 lbs (310 kg)