Schneider Electric / Square D TBX DMS1625 Distributed Analog I/O Module
  • Schneider_TBXDMS1625_View1
  • Schneider_TBXDMS1625_View2
  • Schneider_TBXDMS1625_View3
  • Schneider_TBXDMS1625_View4

Schneider Electric / Square D TBX DMS1625 Distributed Analog I/O Module

Features

  • Eight Input and Eight Relay Output Points
  • Output Fallback State Control
  • 24 VDC Logic Power Supply
  • Removable Field Wiring Terminal Strip

View our selection of these items below.




Contact Us
Share:



This Schneider Electric / Square D TBX DMS1625 Distributed Analog I/O Module is used and in excellent condition.

Configuration:
• Operating Voltage: 24 VDC Nominal
• Number of Inputs per Base Unit: 8
• Number of Outputs per Base Unit: 8




This Schneider Electric / Telemecanique TBX LEP030 Communication Module is used and in excellent condition.

The TBX LEP030 communication module is required when 1 or 2 analog base units (base or extension) are connected at any Fipio fieldbus connection point. The number of analog channels for TBX base units of the same type is limited to 1008.

Configuration:
• Connector: 9-Way Male SUB-D Type
• Number of DIP Switches: 5
• I/O Display Window

Accessories:
• TBX BLP01: Female 9-Way SUB-D Type Connector

View Photo of the unit's front connectors.

View Photo of the unit's back connectors.

Schneider Electric / Telemecanique TBX LEP030 Datasheet (pdf)



  • Description
  • Tech Specs
  • Datasheets / Manuals 
Contact Us
Share:

Description

The Schneider Electric / Square D TBX DMS1625 is a distributed input/output base unit containing eight 24 VDC inputs and digital relay outputs. This base unit may be coupled with a compatible communications interface to form a complete distributed block, which is well suited for the control of discrete field devices located some distance from a host programmable logic controller (PLC). The application of distributed I/O blocks saves installation and maintenance cost, as compared to direct wiring of field devices to a centralized I/O system over long distances. The TBX DMS1625 base unit can be used with either SY/MAX® or Telemecanique PLCs, through the use of a compatible communications interface, or “top hat”. The interface mounts directly on the base unit, and allows the PLC to read and write to the I/O points through a suitable control network. The Class 8030 Type CRM275 Distributed Remote IO/NET™ Interface (DRIO) supports connection to the IO/NET control network as part of the PASSPORT™ I/O System. The TBX LEP020 and TBX LEP030 communications interfaces support connection to the FIPIO network. The TBX CBS010 Expansion Interface allows inexpensive connection of a second TBX base unit to a single communications top hat.

Product Family: TBXDMS1625, TBXDMS-1625, TBX-DMS-1625
Contact Us
Share:

Specifications