Items/Page
72 / 72 Results
Keysight / Agilent E2251A C-Size VXI M-Module Carrier
This Agilent E2251A C-Size VXI M-Module Carrier is new from surplus stock. Some accessories and documentation included.
Keysight / Agilent E2251A C-Size VXI M-Module Carrier
This Agilent E2251A C-Size VXI M-Module Carrier is used and in excellent condition.
Keysight / Agilent E2272A Dual 8 x 1 Relay Multiplexer M-Module
This Agilent E2272A Dual 8 x 1 Relay Multiplexer M-Module is used, and in excellent condition. The Agilent E2272A Dual 8 x 1 Relay Multiplexer is a single-wide, register-based M-Module. Use the E2272A as an input or output multiplexer for a matrix or other switching configuration. You can also connect multiple analog signals to a DMM or other instruments.

It consists of 16 DPST latching relays and is organized as two separate 8 x 1 relay multiplexers. This allows the selection of one of eight two-wire signals to connect to one common destination while the other set of eight two-wire signals can be selectively connected to a second destination. By moving a jumper on the module, you configure the E2272A as one 16 x 1 multiplexer.

Logic on the card provides for maskable interrupts (INTC type) once the requested relay movements are complete. The module also has a FIFO for storing up to 8 relay operations. Rapid setup changes can be written to the module and executed with only one interrupt occurrence once the entire group of relay movements is complete.

With each M-Module having its own address within the E2251A M-Module carrier, you have the flexibility to use the M-Modules in many combinations. This flexibility allows you to get the amount of functionality you need in smaller blocks, lowering your overall system costs. Please see the E2251A Technical Specifications for M-Module slot requirements.

Agilent E2272A Datasheet (pdf)
C&H M220 Datasheet (pdf)
C&H M220 User Manual (pdf)

Keysight / Agilent E2261A Quad RS-232 Interface M-Module
This Agilent E2261A Quad RS-232 Interface M-Module is new from surplus stock. The E2261A is a single-wide, register-based M-Module. Because of its dense double-sided design, it is recommended for use with only the E2251A C-size M-Module carrier. The E2261A has four independently programmable RS-232 terminal interfaces. Using the available breakout cable (option 001), you can route these four interfaces to four different locations. In a loaded E2251A (five E2261A units), you can have 20 serial interfaces! The built-in data handshaking and the internal 2KB data buffers per channel reduce communication overhead. With software limitations, the E2261A can be used as a general purpose RS-232 communications module for control of other instruments.

Agilent E2261A Datasheet (pdf)
C&H M217 Datasheet (pdf)
C&H M217 User Manual (pdf)

Keysight / Agilent E2261A Quad RS-232 Interface M-Module
This Agilent E2261A Quad RS-232 Interface M-Module is used and in excellent condition. The E2261A is a single-wide, register-based M-Module. Because of its dense double-sided design, it is recommended for use with only the E2251A C-size M-Module carrier. The E2261A has four independently programmable RS-232 terminal interfaces. Using the available breakout cable (option 001), you can route these four interfaces to four different locations. In a loaded E2251A (five E2261A units), you can have 20 serial interfaces! The built-in data handshaking and the internal 2KB data buffers per channel reduce communication overhead. With software limitations, the E2261A can be used as a general purpose RS-232 communications module for control of other instruments.

Agilent E2261A Datasheet (pdf)
C&H M217 Datasheet (pdf)
C&H M217 User Manual (pdf)

Keysight / Agilent E2261A Quad RS-232 Interface M-Module
This Agilent E2261A Quad RS-232 Interface M-Module is new from surplus stock. The E2261A is a single-wide, register-based M-Module. Because of its dense double-sided design, it is recommended for use with only the E2251A C-size M-Module carrier. The E2261A has four independently programmable RS-232 terminal interfaces. Using the available breakout cable (option 001), you can route these four interfaces to four different locations. In a loaded E2251A (five E2261A units), you can have 20 serial interfaces! The built-in data handshaking and the internal 2KB data buffers per channel reduce communication overhead. With software limitations, the E2261A can be used as a general purpose RS-232 communications module for control of other instruments.

This unit ships in the manufacturer's packaging with the following accessories:
• Agilent Developer Network Instrument Drivers and I/O Libraries Software
• High-Density D-Sub 301A10149X Connector
• Standard Hardware (P/N: E2273-60001)
• User Manual

Agilent E2261A Datasheet (pdf)
C&H M217 Datasheet (pdf)
C&H M217 User Manual (pdf)

Keysight / Agilent E2251A C-Size VXI M-Module Carrier
This Agilent E2251A C-Size VXI M-Module Carrier is new from surplus stock. Standard accessories and documentation included and comes in the original box.
MEN Micro / Mikro Elektronik F205 3U CompactPCI / PXI M-Modules Carrier Board
This Mikro Elektronik F205 3U CompactPCI / PXI M-Modules Carrier Board is used and in excellent condition.

Configuration:

• Number of M-Module Slots: 2

Part Number: 02F205-04

Keysight / Agilent E2270A 16-Channel Form A Switch
This Agilent E2270A 16-Channel Form A Switch is used, and in excellent condition. The E2270A is a single-wide, register-based M-Module. It furnishes 16 independent SPST latching relays for general purpose signal switching and control of external devices. Use this M-Module when you need high integrity contacts or quality connections of non-multiplexed signals in your system.

Logic on the card provides for maskable interrupts (INTC type) when the requested relay movements have been completed. The module also has a FIFO for storing up to eight relay operations. You can write rapid setup changes to the module and execute them with only one interrupt occurrence once the entire group of relay movements is complete.

Agilent E2270A Datasheet (pdf)
C&H M218 Datasheet (pdf)
C&H M218 User Manual (pdf)

Acromag AVME9480 Digital I/O Module
This Acromag AVME9480 Digital I/O Module is used and in excellent condition.

Configuration:
• Front Panel Access
Keysight / Agilent E2271A 4 x 4 Matrix Switch
This Agilent E2271A 4 x 4 Matrix Switch is used, and in excellent condition. The E2271A is a single-wide, register-based M-Module. It contains 16 DPST latching relay switches organized as a 4 x 4 relay matrix. This allows for four sources and four destinations of two-wire switching to connect in any desired combinations. Therefore, it brings highly flexible matrix switching to your test system.

Logic on the card provides for maskable interrupts (INTC type) once the requested relay movements are complete. The module also has a FIFO for storing up to 8 relay operations. You can write rapid setup changes to the module and execute them with only one interrupt occurrence once the entire group of relay movements is complete.

You can use this M-Module to conveniently connect a group of instruments to several points on a device under test. A matrix module can be the center of a larger switching system, within the E2251A C-size carrier, with multiplexer and general purpose relays connecting multiple signals to the matrix.

Agilent E2271A Datasheet (pdf)
C&H M219 Datasheet (pdf)
C&H M219 User Manual (pdf)

Keysight / Agilent E2290A 16-Bit Digital I/O M-Module
This Agilent E2290A 16-Bit Digital I/O M-Module is used, and in excellent condition.

The Agilent E2290A 16-bit Digital I/O Module is a single-wide, register-based M-Module. It supplies versatile digital sensing and control of devices and special purpose circuitry in your system on a bit-by-bit basis.

The E2290A provides 16 data lines with TTL compatible I/O, or TTL compatible inputs and open collector outputs up to 30 V. Each I/O line provides switchable current sinks for actuation of external devices. These include: high voltage/high current and RF relays & switches, high frequency coax relays (i.e., microwave switches), and programmable attenuators.

With each M-Module having its own address within the E2251A M-Module carrier, you have the flexibility to use the M-Modules in many combinations. This flexibility allows you to get the amount of functionality you need in smaller blocks, lowering your overall system costs. Please see the E2251A Technical Specifications for M-Module slot requirements.

Agilent E2290A Datasheet (pdf)
C&H M223 Datasheet (pdf)
C&H M223 User Manual (pdf)

Keysight / Agilent E2251A C-Size VXI M-Module Carrier
This Agilent E2251A C-Size VXI M-Module Carrier is new from surplus stock. No accessories are included.
AcQ Inducom / AcQuisition Technology M320 12-bit 8/16 Channel ADC M-module
This AcQ Inducom / AcQuisition Technology M320 12-bit 8/16 Channel ADC M-module is used, and in excellent condition.
Acromag AVME9325-5 High Speed Analog Input Board with RAM
This Acromag AVME9325-5 High Speed Analog Input Board with RAM is used and in excellent condition.

• 5µs Throughput Per Channel
• Part Number: AVME9325-5 W4D
Keysight / Agilent E2272A Dual 8 x 1 Relay Multiplexer M-Module
This Agilent E2272A Dual 8 x 1 Relay Multiplexer M-Module is new from surplus stock. It ships in the manufacturer's box with all standard accessories. The Agilent E2272A Dual 8 x 1 Relay Multiplexer is a single-wide, register-based M-Module. Use the E2272A as an input or output multiplexer for a matrix or other switching configuration. You can also connect multiple analog signals to a DMM or other instruments.

It consists of 16 DPST latching relays and is organized as two separate 8 x 1 relay multiplexers. This allows the selection of one of eight two-wire signals to connect to one common destination while the other set of eight two-wire signals can be selectively connected to a second destination. By moving a jumper on the module, you configure the E2272A as one 16 x 1 multiplexer.

Logic on the card provides for maskable interrupts (INTC type) once the requested relay movements are complete. The module also has a FIFO for storing up to 8 relay operations. Rapid setup changes can be written to the module and executed with only one interrupt occurrence once the entire group of relay movements is complete.

With each M-Module having its own address within the E2251A M-Module carrier, you have the flexibility to use the M-Modules in many combinations. This flexibility allows you to get the amount of functionality you need in smaller blocks, lowering your overall system costs. Please see the E2251A Technical Specifications for M-Module slot requirements.

Agilent E2272A Datasheet (pdf)
C&H M220 Datasheet (pdf)
C&H M220 User Manual (pdf)

Keysight / Agilent E2290A 16-Bit Digital I/O M-Module
This Agilent E2290A 16-Bit Digital I/O M-Module is new from surplus stock. It ships in the original Agilent static bag.

The Agilent E2290A 16-bit Digital I/O Module is a single-wide, register-based M-Module. It supplies versatile digital sensing and control of devices and special purpose circuitry in your system on a bit-by-bit basis.

The E2290A provides 16 data lines with TTL compatible I/O, or TTL compatible inputs and open collector outputs up to 30 V. Each I/O line provides switchable current sinks for actuation of external devices. These include: high voltage/high current and RF relays & switches, high frequency coax relays (i.e., microwave switches), and programmable attenuators.

With each M-Module having its own address within the E2251A M-Module carrier, you have the flexibility to use the M-Modules in many combinations. This flexibility allows you to get the amount of functionality you need in smaller blocks, lowering your overall system costs. Please see the E2251A Technical Specifications for M-Module slot requirements.

Agilent E2290A Datasheet (pdf)
C&H M223 Datasheet (pdf)
C&H M223 User Manual (pdf)

Part Number: E2290-66501

Acromag AVME9481 Digital I/O Module
This Acromag AVME9481 Digital I/O Module is used and in excellent condition.

Configuration:
• P2 Access
MEN Micro / Mikro Elektronik M33 4 Analog Outputs M-Module
This Mikro Elektronik M33 8 Analog Outputs M-Module is used and in excellent condition.

Configuration:

• Channels: 4

Part Number: 04M033-09

Keysight / Agilent E2260A Dual RS-232 Interface M-Module
This Agilent E2260A Dual RS-232 Interface M-Module is new from surplus stock. The unit ships in the original static bag.

The E2260A has two independently programmable RS-232 terminal interfaces.

With each M-Module having its own address within the E2251A M-Module carrier, you have the flexibility to use the M-Modules in many combinations. This flexibility allows you to get the amount of functionality you need in smaller blocks, lowering your overall system costs. Please see the E2251A Technical Specifications for M-Module slot requirements.

The E2260A was replaced by the E2261A Quad RS-232 M-Module.

Keysight / Agilent E2291A 16-Channel Isolated Digital Output M-Module
This Agilent E2291A 16-Channel Isolated Digital Output M-Module is new from surplus stock. It ships in the original Agilent static bag.

The Agilent E2291A 16-Channel Isolated Digital Output Module is a single-wide, register-based M-Module. It provides 16 channels of isolated open-collector digital output in four groups of four. Each group requires its own + 5 Vdc power supply (supplied by user). You can use channels as digital outputs or as drivers for external relays. All channels have their own ground, isolated from the chassis, can sink up to 200 mA each, and can switch voltages up to 36 V.

Agilent E2291A Datasheet (pdf)
C&H M224 Datasheet (pdf)
C&H M224 User Manual (pdf)

Keysight / Agilent E2273A 8-Channel Form C Switch M-Module
This Agilent E2273A 8-Channel Form C Switch M-Module is used and in excellent condition.

The Agilent E2273A 8-Channel Form C Switch is a singlewide, register-based M-Module. It provides eight individual Form C (SPDT) channels for general purpose switching and control of external devices. Using an external power supply, you can use the module to drive programmable attenuators and microwave switches. In critical applications where signal integrity is important, use the module to drive microwave relays at the test setup instead of extending your test signal cables to the switch driver.

Logic on the card provides for maskable interrupts (INTC type) once the requested relay movements complete. With each M-Module having its own address within the E2250A and E2251A M-Module carriers, you have the flexibility to use the M-Modules in many combinations. This flexibility allows you to get the amount of functionality you need in smaller blocks, lowering your overall system costs.

Agilent E2273A Datasheet (pdf)
C&H M221 Datasheet (pdf)
C&H M221 User Manual (pdf)

Astronics / C&H Technologies MA200 Aperature A/D MA-Module
This unit comes with an AM102 Anti-Aliasing Filter module for input signal conditioning.

Aperature A/D MA-Module Part Numbers: 11027860, 11027860-0001


Anti-Aliasing Filter Part Number: 11027980, 11027980-1

MEN Micro / Mikro Elektronik M77 4-Channel RS232/RS422/RS485 M-Module
This Mikro Elektronik M77 4-Channel RS232/RS422/RS485 M-Module is used and in excellent condition.

Configuration:

• Operational Temperatures: 0 - 60 °C

Part Number: 04M077-00
Product Family: 5998-01-630-8877, 5998016308877

AcQ Inducom / AcQuisition Technology M323 6x Quadrature Incremental Encoder Interface M-Module
This AcQ Inducom / AcQuisition Technology M323 6x Quadrature Incremental Encoder Interface M-Module is used and in excellent condition.
AcQ Inducom / AcQuisition Technology M372 LVDT / RVDT Controller M-Module
This AcQuisition Technology M372 LVDT / RVDT Controller M-Module is used and in excellent condition.
AcQ Inducom / AcQuisition Technology M395/V12/WDC 16 Channel DAC M-module
This AcQ Inducom / AcQuisition Technology M395/V12/WDC 16 Channel DAC M-Module is used and in excellent condition.

Configuration:
• 12-bit
• With DC/DC

AcQ Inducom / AcQuisition Technology M338 Octal Relay Controller M-Module
This AcQ Inducom / AcQuisition Technology M338 Octal Relay Controller M-Module is used and in excellent condition.
MEN Micro / Mikro Elektronik M43 8-Relay Output M-Module
This Mikro Elektronik M43 8-Relay Output M-Module is new from surplus stock.

Configuration:
• Operational Temperatures: 0 - 60 °C

Part Number: 04M043-00
Astronics / C&H Technologies MA201 High Voltage Sequential Source
This C&H Technologies MA201 High Voltage Sequential Source is new from surplus stock.

11027960-0005 Configuration:

• 20-100 V HV Rail

Part Number: 11027960-0005


AcQ Inducom / AcQuisition Technology M340 CompactFlash M-Module
This AcQ Inducom / AcQuisition Technology M340 CompactFlash M-Module is new form surplus stock.

AcQ Inducom / AcQuisition Technology M300 ARCNET Controller M-Module
This AcQ Inducom / AcQuisition Technology M300 ARCNET Controller M-Module is new from surplus stock.

Astronics / C&H Technologies MA202 Digital Word Generator and Timing Simulator Module
This C&H MA202 Digital Word Generator and Timing Simulator Module is new from surplus stock.

Configuration:

• Time Base: Internal Clock

Part Number: 11027521-0001

Keysight / Agilent E2261A Quad RS-232 Interface M-Module
This Agilent E2261A Quad RS-232 Interface M-Module is sealed in manufacturers packaging. The E2261A is a single-wide, register-based M-Module. Because of its dense double-sided design, it is recommended for use with only the E2251A C-size M-Module carrier. The E2261A has four independently programmable RS-232 terminal interfaces. Using the available breakout cable (option 001), you can route these four interfaces to four different locations. In a loaded E2251A (five E2261A units), you can have 20 serial interfaces! The built-in data handshaking and the internal 2KB data buffers per channel reduce communication overhead. With software limitations, the E2261A can be used as a general purpose RS-232 communications module for control of other instruments.

Agilent E2261A Datasheet (pdf)
C&H M217 Datasheet (pdf)
C&H M217 User Manual (pdf)

Keysight / Agilent E2261A Quad RS-232 Interface M-Module
This Agilent E2261A Quad RS-232 Interface M-Module is new from surplus stock. This unit ships in manufacturers packaging.

The E2261A is a single-wide, register-based M-Module. Because
of its dense double-sided design, it is recommended for use with only the E2251A C-size M-Module carrier. The E2261A has four independently programmable RS-232 terminal interfaces. Using the available breakout cable (option 001), you can route these four interfaces to four different locations. In a loaded E2251A (five E2261A units), you can have 20 serial interfaces! The built-in data handshaking and the internal 2KB data buffers per channel reduce communication overhead. With software limitations, the E2261A can be used as a general purpose RS-232 communications module for control of other instruments.

This unit ships in the manufacturer's packaging with the following accessories:
• High-Density D-Sub 301A10149X Connector
• Standard Hardware (P/N: E2273-60001)
• User Manual

Agilent E2261A Datasheet (pdf)
C&H M217 Datasheet (pdf)
C&H M217 User Manual (pdf)

Keysight / Agilent E2195A Cable DSL Switch M-Module
This Agilent E2195A Cable DSL Switch M-Module is used, and in excellent condition.
Alfautomazione M1010 M-Module
This Alfautomazione M1010 M-Module is used and in excellent condition.

25-Pin Front Panel Connector
Keysight / Agilent E2260A Dual RS-232 Interface M-Module
This Agilent E2260A Dual RS-232 Interface M-Module is used, and in excellent condition. The E2260A has two independently programmable RS-232 terminal interfaces.

With each M-Module having its own address within the E2251A M-Module carrier, you have the flexibility to use the M-Modules in many combinations. This flexibility allows you to get the amount of functionality you need in smaller blocks, lowering your overall system costs. Please see the E2251A Technical Specifications for M-Module slot requirements.

The E2260A was replaced by the E2261A Quad RS-232 M-Module.

Keysight / Agilent E2259A Double-Wide Breadboard M-Module
This Agilent E2259A 16-Channel Double-Wide Breadboard M-Module is used and in excellent condition. The breadboard area is lightly used (end-user components installed on some of breadboard).

The Agilent E2259A is a double-wide, register-based M-Module. It can help in designing and building special functions for a system. Filters, amplifiers, and other custom circuitry can be implemented on the breadboard’s plated holes which are in an 1/10th inch hole pattern. When custom circuit requires only one M-Module slot, the breadboard can be broken along its score line. Also, access is available to the +5 V and ± 12 V power supplies. Connections are made with two 44-pin D-Sub connectors and plastic housing.

View Photo of the rear of the board.

Agilent E2259A Datasheet (pdf)
Agilent E2259A User Programming Manual (pdf)
C&H M216 Datasheet (pdf)

Alfautomazione M1011 MDriver M-Module
This Alfautomazione M1011 MDriver M-Module is used and in excellent condition.

25-Pin Front Panel Connector
Alfautomazione M1013 Video Line Selector M-Module
This Alfautomazione M1013 Video Line Selector M-Module is used and in excellent condition.

(4) SMB Front Panel Connectors
Astronics / C&H Technologies MA200 Aperature A/D MA-Module
This unit comes with an AM102 Anti-Aliasing Filter module for input signal conditioning.

Aperature A/D MA-Module Part Numbers: 11027860, 11027860-0001


Anti-Aliasing Filter Part Number: 11027980, 11027980-1

MEN Micro / Mikro Elektronik D201 6U CompactPCI / PXI M-Modules Carrier Board
Configuration:
• Number of M-Module Slots: 4

Part Number: D201-R02, 02D201-00
MEN Mikro M76 Digital Multimeter M-Module
This unit is a prototype module.

Part Number: 04M076-00, M076-R01
MEN Micro / Mikro Elektronik M43 8-Relay Output M-Module
This Mikro Elektronik M43 8-Relay Output M-Module is used and in excellent condition.

Configuration:

• Operational Temperatures: 0 - 60 °C

Part Number: 04M043-00

MEN Micro / Mikro Elektronik M58 32-Bit TTL I / O Interface M-Module
This Mikro Elektronik M58 32-Bit TTL I / O Interface M-Module is used and in excellent condition.

Part Number: 04M058-00
MEN Micro / Mikro Elektronik M51 Quadruple CAN Interface M-Module
This Mikro Elektronik M51 Quadruple CAN Interface M-Module is used and in excellent condition.

Part Number: 04M051-01
MEN Micro / Mikro Elektronik M69 Quadruple RS232 Interface M-Module
This Mikro Elektronik M69 Quadruple RS232 Interface M-Module is used and in excellent condition.

Part Number: 04M069-00
Astronics / C&H Technologies MA201 High Voltage Sequential Source
This C&H Technologies MA201 High Voltage Sequential Source is used and in excellent condition.

11027960-0005 Configuration:

• 20-100 V HV Rail

Part Number: 11027960-0005


Astronics / C&H Technologies 13240094-01 3-Slot M-Module
This C&H Technologies 13240094-01 3-Slot M-Module is used and in excellent condition.
MEN Micro / Mikro Elektronik M23 16-Bit Binary Output M-Module
This Mikro Elektronik M23 16-Bit Binary Output M-Module is used and in excellent condition.

25-Pin Front Panel Connector

Part Number: M23-R1
Astronics / C&H Technologies MA202 Digital Word Generator and Timing Simulator Module
This C&H MA202 Digital Word Generator and Timing Simulator Module is used and in excellent condition.

Configuration:

• Time Base: Internal Clock

Part Number: 11027521-0001

MEN Micro / Mikro Elektronik M1 Binary Input M-Module
This Mikro Elektronik M1 Binary Input M-Module is used and in excellent condition.

Part Number: M1-R1
AcQ Inducom / AcQuisition Technology M325 Quad. Voltage/Current DAC M-module
This AcQ Inducom / AcQuisition Technology M325 Quad. Voltage/Current DAC M-module is used and in excellent condition.
Alfautomazione M1010 12C Transceiver Adaptor
This Alfautomazione M1010 12C Transceiver Adaptor is used and in excellent condition.

Part Number: 200050100881 / 0054
Astronics / C&H Technologies MA203 16-Channel Digital Input Module
This unit comes with the AM104 Signal Conditioning Accessory with Option 1 installed.

MA203 Part Number: 11028100-0001

AM104 Part Number: 11028120-0001
Astronics / C&H Technologies MA203 16-Channel Digital Input Module
This unit comes with the AM104 Signal Conditioning Accessory with Option 4 installed.

MA203 Part Number: 11028100-0001

AM104 Part Number: 11028120
72 / 72 Results
Contact Us
Fax:

(240) 376-1381