Items/Page
Showing 1-100 of 6935 Results
Ametek / VTI Instruments / VXI Technology VM3616A 16-channel, 16-bit DAC/Waveform Generator
Configuration:
• 16 Independent 16-bit D/A Converters per Instrument for High Speed

• Arbitrary Waveform Generation with Internal Programmable Clock
• FIFO Mode Allows High-speed Uninterrupted Data Output
• Data Storage and Scan Lists Speed Testing
• Extensive Triggering Capability
• SCPI Compatible

This unit has the newer-style connectors, pictured here.
The mating module connector is pictured here.

Ametek / VTI Instruments / VXI Technology VM3608A / VM3616A Datasheet (pdf)
Ametek / VTI Instruments / VXI Technology VM3608A / VM3616A Manual (pdf)

Part Number: 52-0594-000, 52-0080-001
Product Family: 5998-01-532-6354, 5998015326354

Advantech / B&B Electronics 232PTC9 RS-232 Port Combiner
This unit does not include the required external 12 VDC @ 100 mA power supply.
Keithley 7035 9-Bank, 1 x 4 Multiplexer Card
The 7035 9-Bank Multiplexer Card has nine 1x4 multiplexers. The switch contact configuration for each channel is 2-pole form A. The card's nine banks can be combined for a wide variety of switching configurations using external connections. This flexibility makes the Model 7035 well-suited for production testing of a variety of telecommunications products and systems and low power portable devices.

Keithley 7035 Manual (pdf)

Ametek / VTI Instruments / VXI Technology VM6068 4-Channel, High-Performance Serial Interface with Option 1
This unit is also known as VM6068-1.

Configuration:
• Four Independent Channels
• 5 M Baud Data Rates

• Software Programmable Interface Standards: RS-232, RS-422, RS-423, RS-449, RS-485, V.35 & EIA-530
• Supports UART and HDLC/SDLC Protocols
• SCPI Compatible
• VXI Plug and Play Drivers
• Option 1: 4MB RAM

Part Number: 52-0052-000, 52-0052-001, 52-0576-000

This unit has the newer-style connectors, pictured here.
The mating module connector is pictured here.

Ametek / VTI Instruments / VXI Technology VM6068 Datasheet (pdf)
Ametek / VTI Instruments / VXI Technology VM6068 Manual (pdf)

National Instruments SCC-RLY01 1-Channel Relay Module
This unit does not include a terminal block.

Part Number: 187397B-01

View National Instruments SC Signal Conditioning Connector Block.

View National Instruments SCC Analog Input/Output Modules.


GE / Bently Nevada 146031-01 I/O Module for 3500/22
This unit is also known as the 3500/22 10 Base-T/100 Base-TX I/O Module.

Part Number: 146031-01
Rockwell / Allen-Bradley 1771-IBD 10 to 30V DC Input Module
This Rockwell / Allen-Bradley 1771-IBD 10 to 30V DC Input Module is used and in excellent condition.

Rockwell / Allen-Bradley 1771-IBD Installation Instructions (pdf)

Part Number: 1771-IBD, 96134475, 96134473

National Instruments SCC-AI03 2-Channel Analog Input Module
This unit does not include a terminal block.

Configuration:

• Voltage: 10V

• Frequency: 10 kHz

Part Numbers: 186623E-03, 186623C-03, 186623F-03

View National Instruments SC Signal Conditioning Connector Block.
View National Instruments SCC Digital Input/Output Modules.

Keithley 7158 Low Current Scanner Card
Features of the scanner include a low offset current error (<1pA specified, <30fA typical). The 7158 Low Current Scanner Card includes switching of AC or DC signals up to 100mA. This model provides BNC input and output connectors. Two outputs allow daisy-chaining of Model 7158 cards. This unit is configurable for low current or low voltage switching.

Each channel on the Model 7158 has a pair of single-pole single-throw (SPST), normally open (NO) relays. The relay pair switches signal HI between signal IQ (analog ground) and output HI. Signal LO (outside shell of the BNC) is common to all channels and outputs in the system

Keithley 7158 Low Current Scanner Card Datasheet (pdf)
Keithley 7158 Low Current Scanner Card Manual (pdf)

Neutrik Test Instruments RT-2M 2-Channel Analog Audio Frequency Generator and Analyzer
This Neutrik Test Instruments RT-2M 2-Channel Analog Audio Frequency Generator and Analyzer is used and in good condition. Software for the unit is not included. Please contact manufacturer for pricing and availability.
Exfo / Gnubi EPX300 DS3 Transceiver Module
This Exfo / Gnubi EPX300 DS3 Transceiver Module is used and in excellent condition.

Connector Interface: 75 Ohm Unbalanced BNC


The EPX300 Transceiver supports DS3 signal generation and monitoring. It is designed for all of gnubi’s chassis models. The EPX300 module provides payload generation and monitoring. The Gnubi EPX300 includes features such as alarm and error insertion and monitoring, and data pattern selection.

Part Numbers: B031-0 , 0006-00 , A0031-01 , B0000031, G0006-00

Keysight / Agilent E1476-80010 QUIC Terminal Block
This is a Terminal Block accessory for interfacing to the 'New-Style' E1476A VXI modules that are made with QUIC Rails.
Ametek / VTI Instruments / VXI Technology VM2710A 6.5 Digit Multimeter
Configuration:
• DCV, ACV, DCI, ACI, 2- and 4-wire Ohms
• Up to 2000 Readings/sec Over the Backplane

• FIFO Memory for Continuous Measurements
• Two Balanced Differential Isolated Inputs
• Standard 64000 Readings

Part Number: 70-0074-000, 52-0074-000, 52-0074-000F, 52-0074-000L

This unit has the newer-style connectors, pictured here.
The mating module connector is pictured here.

Ametek / VTI Instruments / VXI Technology VM2710A Datasheet (pdf)
Ametek / VTI Instruments / VXI Technology VM2710A Manual (pdf)
Product Family: 5998-01-507-2260, 5998015072260

GE / Bently Nevada 330130-080-00-00 3300 XL Standard Extension Cable
Configuration:
• Cable Length: 8 m (26.2 ft.)
• Connector Protector and Cable Option: Standard Cable

• Agency Approval Option: None
National Instruments SCB-68A 68-Pin Shielded Connector I/O Connector Block
This unit is sealed in the original manufacturer's static bag.

Part Number: 154137B-01L, 153721B-01L, 153721C-01L, 782536-01
GE / Bently Nevada 330105-02-12-10-02-00 3300 XL 8 mm Reverse Mount Probe, 3/8 -24 UNF Threads
Configuration:
• Cable Length: 1 m (3.3 feet)
• Connector: Miniature ClickLoc Coaxial

• Agency Approval: None Required


National Instruments BNC-2110 Shielded Connector Block for 68-Pin M Series, S Series and B Series
Part Number: 185124E-01, 185124F-01, 185124C-01, 777643-01, 185124B-01, 185124H-01L, 185124G-01L
Ametek / VTI Instruments / VXI Technology VM2616 16-Channel, 16-Bit Digitizer
Configuration:
• 16 Independent Channels of an Analog to Digital Converter

• 16 bits of resolution and a sample rate of up to 100 kSa/s
• Differential Signal Input Type
• DC Signal Input Coupling
• 1 MHz Reference Oscillator

Part Number: 52-0060-000, 70-0065-000

This unit has the newer-style connectors, pictured here.
The mating module connector is pictured here.

Ametek / VTI Instruments / VXI Technology VM2608/VM2616 Datasheet (pdf)
Ametek / VTI Instruments / VXI Technology VM2608/VM2616 Manual (pdf)
Product Family: 5998-01-582-5588, 5998015825588

National Instruments CB-68LPR 68-Pin Digital and Trigger I/O Terminal Block
It is a low-cost termination accessory with 68 screw terminals for easy connection of field I/O signals to 68-pin DAQ products. The CB-68LPR has a right-angle mounted 68-pin connector.

Dimensions: 7.62 by 16.19 cm (3.00 by 6.36 in.)

Part Number: 184700B-01, 184700C-01, 184700D-01L


Keysight / Agilent E1467-80010 Screw Terminal Block for the E1467A (QUIC)
This Keysight / Agilent E1467-80010 Screw Terminal Block for the E1467A is used and in good condition. This unit has cosmetic blemishes on the front housing; however, this does not affect its ability to function properly. It has the new-style Agilent terminal block interface (QUIC).

View Representative Photo of cosmetic blemishes.

RadiSys EXM-10A Ethernet Interface Card
The EXM-10A is a "universal" Ethernet controller that works in standard 8-bit and faster 16-bit mode, and emulates both the Western Digital WD8003E and WD8013 controllers and the Novell NE2000 and NE2000+ controllers.

On the front panel of the EXM-10A, there are transceivers for 10-base-T (twisted pair) and 10-base-2 (thin Ethernet) and an AUI connector for external transceivers to thick Ethernet or other media. A dual LED indicates when the EXM-10A is transmitting or receiving data.

RadiSys EXM-10A Manual (pdf)

Part Number: 61-0175-10, 61-0175-11, 61-0509-00

Keysight / Agilent 44421A 20-Channel Relay Multiplexer
Option:
• 010 for the 3497A Control Unit

Part Numbers: 03497-66553, 03497-66509
DynamicSignals / Kinetic Systems / Preston 8300 XWB Amplifier
This Kinetic Systems / Preston 8300 XWB Amplifier is used and in excellent condition.

Configuration:
• Gain: 10 Fixed Steps

• Gain Accuracy: ±0.01% ±3 µvolts RTI
• Bandwidth: Switch Selectable 10, 100, 1 kHz, 10 kHz and 100 kHz

Part Number: 61850

Ametek / VTI Instruments / VXI Technology VM3618 8-Channel Isolated 16-bit D/A Converter
Configuration:
• 8 Independent Isolated 16-bit D/A Converters per Instrument

• 5 Output Ranges: ±10 V, ±16 V, 0-20 V, 0-32 V and ±20 mA
• Extensive Triggering Capability
• Scan Lists Ease Testing
• On-board Storage of Calibration Constants
• SCPI Compatible

Part Number: 52-0073-000

This unit has the newer-style connectors, pictured here.
The mating module connector is pictured here.

Ametek / VTI Instruments / VXI Technology VM3618 Datasheet (pdf)
Ametek / VTI Instruments / VXI Technology VM3618 Manual (pdf)

National Instruments SCC-AI04 2-Channel Isolated Analog Input Module
This unit does not include a terminal block.

Configuration:

• Voltage: 5V

• Frequency: 10 KHz

Part Numbers: 186623E-04, 186623C-04, 777459-23

View National Instruments SC Signal Conditioning Connector Block.
View National Instruments SCC Digital Input/Output Modules.

National Instruments USB-6525 Digital I/O Device
Terminal Blocks are sold separately.

Part Number: 193283C-01L, 779640-01
National Instruments SCB-68 Shielded 68-Pin I/O Connector Block
Part Numbers: 182469-01, 182469C-01, 182469-01B, 182469D-01, 182469E-01L, 182469F-01L
Astronics / EADS / Racal 1260-114OC Open Collector Digital I/O Plug-In Module
This unit is sealed in the original manufacturer's bag and includes a software CD-ROM.

EADS / Racal 1260-114 Datasheet (pdf)

Part Number: 407661-003
PCB Assy Number: 405145-003
Software Part Number: 980824-114
Product Family: 5998-01-543-6853, 5998015436853

Exfo / Gnubi EPX210 E1 Signal Generator and Monitor
This Exfo / Gnubi EPX210 E1 Signal Generator and Monitor is used and in excellent condition.

Connector Interface: 120 Ohm LEMO


The EPX210 is a full featured E1 Signal Generator and Monitor. It may be configured as a Dual Transceiver, Quad Transmitter, or Quad Receiver to meet a wide range of test applications. Like all EPX16 test modules, the EPX210 can be run remotely via any Web browser or customer developed software.

Part Number: B00037 , G0019-000L , A0037-L-00 , F0019-000L-00

National Instruments SC-2060 8-Channel Optically Isolated Digital Input Module
SC-2060
The SC-2060 has eight optically isolated digital inputs that are routed back to NI DAQ devices. These inputs have independent voltage reference connections and use optocoupler technology to sense digital signals with up to 400 Vrms of common-mode voltage. A digital signal 9 V below the reference is registered as a logical low. A digital signal 3 V below the reference reads as a logical high. The maximum current rating for each input is 20 mA. For applications with higher currents, use a resistor to limit the current.

Part Number: 180925-01, 180925C-01, 180927-01

Lenze EPM-T110 CAN Gateway Module
This Lenze EPM-T110 CAN Gateway Module is used and in excellent condition.

Specifications:

• DC Voltage: 24

• Connections: 9-Pin Sub-D
• Optocoupler Electrical Isolation
• Interface: System Bus CAN
• Baud Rate: 10kBps to 1MBps
• Numbers of Bus: Max 63
• Electronics Per Station: Max 32

Ametek / VTI Instruments / VXI Technology VM1548 48-Channel TTL I/O Module
Configuration:
• Six Groups of 8 I/O Bits Each
• Up to 144 Channels per Single VXibus C-size Slot

• Message or Register-based Data Access
• ASCII, Hex, OCtal, and Binary Data Output Types
• TTL
• Flexible Triggering and Handshaking Capability
• SCPI Compatible

Part Number: 52-0056-000

This unit has the newer-style connectors, pictured here.
The mating module connector is pictured here.

Ametek / VTI Instruments / VXI Technology VM1548 Datasheet (pdf)
Ametek / VTI Instruments / VXI Technology VM1548 Manual (pdf)
Product Family: 5998-01-506-7373, 5998015067373

OMRON / Delta Tau ACC-24E2A UMAC Turbo 4-Axis Analog Interface Module
The board consists of two interconnected UMAC Turbo ACC-24E2A 2-Axis boards, for a total of 4-Axis of control.

Connector Configuration:
• Base Board: Standard Terminal Block
• Option 1A: Standard Terminal Block (Axis 3 and 4)

Part Number: 603581-105

Abaco Systems / SBS PMC-HS-Serial Quad Channel High Speed Module
This GE Fanuc / SBS PMC-HS-Serial Quad Channel High Speed Module is new from surplus stock.

Part Number: 91815703
Product Family: 5998-01-665-7833, 5998016657833
Measurement Computing / IOtech Digital488OEM IEEE488 to Digital I/O Interface Board
Part Number: Digital488OEM-102
Product Family: 5998-01-412-6107, 5998014126107
VIAVI Solutions / JDSU / EPITAXX ETX 100TL/FC InGaAs PIN Photodiode in FC Receptacle
Configuration:
• Active Diameter: 100µm
• Responsitivity at 1300 nm:
 • Minimum: 0.6 A/W
• Typical: 0.75 A/W
• Dark Current:
 • Maximum: 5.0 nA
 • Typical: 0.5 nA
• Total Capacitance:
 • Maximum: 2.0 pF
 • Typical: 1.5 pF
• Bandwidth: 1000 MHz
• Rise Time: 1 nS

Keysight / Agilent 66103A DC Power Module
Terminal Block / DC Module sold separately.

Output Ratings at 40°C
• Output voltage: 0 to 35 V
• Output current: 0 to 4.5 A

• Maximum power: 150 W

Ametek / VTI Instruments / VXI Technology VM7004 Programmable Resistor Module
VM7004, 4-Channel Programmable Resistor:
The VM7004 is a high-density programmable resistor module with 4 channels per VMIP daughter module.
Each channel is programmable from 0 to 16,383 ohms and has its own sense leads for feedback. Monitor points are also provided per group of 4 channels for ease of calibration.

Configuration:
• Message or Register-based Control
• On-board Scan Lists and Triggering
• Four Modes of Operation
• SCPI Compatible

This unit has the newer-style connectors, pictured here.
The mating module connector is pictured here.

Ametek / VTI Instruments / VXI Technology VM7004 Datasheet (pdf)
Ametek / VTI Instruments / VXI Technology VM7004 Manual (pdf)

Part Numbers: 52-0072-000, 33-0071-000, 70-0207-000

GE / Bently Nevada 3500/25 Enhanced Keyphasor Module
Part Number: 126398-01G, 149371-01G, 149369-01H, 149369-01
National Instruments SCB-68A 68-Pin Shielded Connector I/O Connector Block
This unit is sealed in the original manufacturer's box.

Part Number: 153721C-01L, 782536-01
Newport 8610.8C Combo LDD/TEC Module
This unit can only be used in the 8008 mainframe.

8610.8C
• LDD Output Current Range: 0-1000 mA
• Typical TEC Output Power: 8 W
Astronics / EADS / Racal 1260-114OC Open Collector Digital I/O Plug-In Module
EADS / Racal 1260-114 Datasheet (pdf)

Part Number: 407661-003
PBC Assy Number: 405145-003

Product Family: 5998-01-543-6853, 5998015436853

Phihong POE30U-560(G) 30W Power Over Ethernet Adapter
This is also known as Cognex Product Identification Number CPS-AC-POE1A-US, Part Numbers: 158-1025R and 823-0031-1R.
GE / Bently Nevada 3500/22M Standard Transient Data Interface
The full model Number of this unit is unknown.

Part Number: 288055-01
GE / Bently Nevada 146031-01 I/O Module for 3500/22
This unit is also known as the 3500/22 10 Base-T/100 Base-TX I/O Module.

Part Number: 146031-01
Keysight / Agilent 34901A 20-Channel Multiplexer
The 34901A module for the 34970A Data Acquisition/Switch Unit is a general purpose scanning module. It combines dense, multi-function switching with 60 channel/second scan rates to address a broad spectrum of data acquisition applications.

Part Number: 34901-66501

GE / Bently Nevada 330106-05-30-10-02-05 3300 XL 8mm Reverse Mount Probes, M10 x 1 Threads
Configuration:
• Total Length Option: 1.0 Meter (3.3 Feet)
• Connector Option: Miniature ClickLoc Coaxial Connector

• Agency Approval Option: Multiple Approvals
National Instruments SC-2062 8-Channel Electromechanical Relay
SC-2062

The SC-2062 has eight electromechanical relays controlled by digital output signals from NI DAQ devices. These relays switch many loads that require more power than is available with DAQ device digital lines. Each SC-2062 has screw terminals connected to eight sets of SPDT relay contacts. These contacts can handle 6 A at 30 VDC or 250 Vrms. When the digital output line from the device is in the low (0) state, the contact labeled NC (normally closed) is connected inside the relay to the contact labeled COM (common). When the digital output line is in the high (1) state, the NO (normally open) contact is connected to the COM contact.

Part Number: 180935C-01

GE / Bently Nevada 3300/03-01-00 System Monitor
Configuration:
• Type (01): Standard
• Approvals Option (00): None

Part Number: 89998-01, 87890-01
ARM RealView ICE Multiprocessor EmbeddedICE Interface Unit
This ARM RealView ICE Multiprocessor EmbeddedICE Interface Unit is used and in excellent condition.

5 VDC Output AC adapter is not included
National Instruments SCC-AO10 1-Channel Isolated Analog Output Module
This unit ships sealed in the manufacturer's box.

Part Number: 188787D-01, 777459-50
Keithley 7011-S Quad 1x10 Mux Switch Card
The 7011 Multiplexer Card has four independent banks of 1 x 10, 2-pole channel switching that can be combined for a wide variety of configurations-dual 1 x 20, a 1 x 10 plus 1 x 30, or one large 1 x 40-channel multiplexer. These cards will automatically configure the Model 7001 or 7002 mainframe. Each multiplexer output connects to the 7001/7002 analog backplane through removable jumpers for even greater flexibility.

Keithley 7011 Series Datasheet (pdf)
Keithley 7011 Series Manual (pdf)


Keysight / Agilent 44470A 10-Channel Multiplexer Module
The Connection Terminal Block is sold separately.

Part Number: 44470-66501, 44470-66511
Yaskawa CP-9200SH Series SVA Servo Module
This Yaskawa CP-9200SH Series SVA Servo Module is used and in excellent condition.

• CP-9200SH SVA (P/N: 87921-9000) - 4-shafts Servo Controller
Keithley SSIO-24 24-Channel Solid-State I/O Module Board
Submodules and cable are sold separately.

Compatible with:
• PIO-12
• PIO-24
• uCPIO-24
• uCPIO-12
• PIO-96
• uPIO-72

• SM-ODC5
• SM-OAC5
• SM-IAC5
• SM-IDC5
• DAS-1600

Newport / ILX Lightwave LDC-3916376 Control Module
Laser max current: 1.5 A & TEC max power: 9 W.

The LDC-3916376 Laser Diode Controller Module is a combination current source/temperature controller. The current source provides high stability output of either 1.5 Amp with fully redundant current limits and multiple laser protection features such as contact bounce detection, compliance voltage limit adjust and 4-wire voltage measurement for precise laser diode forward voltage measurement. The built-in bi-polar temperature controller can work with thermistor type temperature sensors and most TEC modules to deliver precise laser temperature control over a wide range of temperatures. Other features of the TEC control circuit include TEC voltage measurement, digital selection of thermistor current range, and control loop gain adjustment from 1 to 127.

Keysight / Agilent 81525A High Power Optical Head
This Agilent 81525A High Power Optical Head is used, and in excellent condition. This module interfaces only with Agilent's 81533B Optical Head interface module.
National Instruments SB-MXI Interface Card
This National Instruments SB-MXI Interface Card is new from surplus stock.

Part Number: 181155-01
Keysight / Agilent 81689A Compact Tunable Laser Option 021
This Agilent / HP 81689A is used, and in excellent condition. It includes option 021 (SM fiber, straight contact output).

Measured Maximum Output Power (Across Spectrum): ≥ 6 dBm


This instrument includes the standard Agilent optical interface (View Photo). The Agilent 81000xI Series optical interface connectors are sold separately. They are available for purchase from our website here: (Item #50516).

Stanford Research SR570 Low-Noise Current Preamplifier
This Stanford Research SR570 Low-Noise Current Preamplifier is used and in excellent condition. Battery is used.
Keysight / Agilent E4863B 3.35 Gb/s Front-End Analyzer Module
This unit requires the E4863-66405 Module to be fully functional. Contact sales for pricing and availability.

Part Number: E4863-60530, E4863-66404, E4863-60531
Keysight / Agilent 5060-3387 16A Relay DC Module Connector - Opt 760
Installed Modules:
• 5060-3470 UTG PCA-Output
• Opt 760: Open/Close and Polarity Reversal Relays
National Instruments CB-68LP 68-Pin Digital and Trigger I/O Terminal Block
It is a low-cost termination accessory with 68 screw terminals for easy connection of field I/O signals to 68-pin DAQ products. The connector blocks include standoff feet for use on a desktop or mounted in a custom panel. The CB-68LP has a vertical-mounted 68-pin connector.

Dimensions: 14.35 by 10.74 cm (5.65 by 4.23 in.)

Part Number: 183030A-01, 183030B-01, 183030C-01, 183030D-01L

Showing 1-100 of 6935 Results
Contact Us
Fax:

(240) 376-1381