Items/Page
59 / 59 Results
SCP Modules and Terminal Block are sold separately. Please contact us for pricing and availability.
Product Family: 6625-01-645-8107, 6625016458107
There are no SCP modules installed. Please browse our inventory here: (Item #52336) for available SCP modules.

The QUIC terminal block is sold separately.
The Agilent E1538A Enhanced Frequency/Totalize/PWM SCP has eight channels. Each of the eight channels can be individually configured to perform input or output functions. Input functions include frequency measurement and totalize, pulse width measurement, rpm, and quadrature count. Output functions can free run or can be triggered. Output functions include square waves, pulse trains, angular position pulse, and stepper motor control.

Agilent E1538A Datasheet (pdf)

There are no SCP modules installed. Please browse our inventory here: (Item #52336) for available SCP modules.
Product Family: 7025-01-491-6218, 7025014916218
The Agilent E1503A 8-Channel Programmable Filter and Gain SCP provides eight programmable, 2-pole low-pass filters with cutoff frequency settings of 2, 10, and 100 Hz, as well as a 1.5 kHz "pass-through" mode (filter OFF). The eight programmable input amplifiers provide input voltage ranges of ± 0.25 V, ± 2 V, and ± 16 V. The E1503A SCP also provides input over-voltage protection and open transducer detection on each channel.

Agilent E1503A Datasheet (pdf)
Agilent E1503A Manual (pdf)

Part Number: E1413-66513, E1413-66713, E1413-63513
Product Family: 5998-01-484-1063, 5998014841063

The Agilent E1502A 8-Channel Low-Pass Filter SCP provides eight fixed, 2-pole, low-pass filters with a 3 dB cutoff frequency of 7 Hz. It also provides input over-voltage protection and open transducer detection on each channel.

Agilent E1502A Datasheet (pdf)

Part Numbers: E1413-66512, E1413-63512
Product Family: 5998-01-569-8486, 5998015698486

The Agilent E1505A 8-Channel Current Source SCP provides eight current sources programmable to one of two current levels. Each current source can be programmed to provide either 30 mA or 488 mA. The E1505A SCP is used to supply excitation current to resistance and resistance-temperature measurements. It also provides over-voltage protection on each channel.

Agilent E1505A Datasheet (pdf)
Agilent E1505A Manual (pdf)

Part Number: E1413-63515
Product Family: 5998-01-484-1072, 5998014841072

The Agilent E1501A Direct Input (>100 kHz BW) Signal Conditioning Plug-on, the most basic of Agilent Technologies' SCPs, provides eight hardwired paths that buffer the input signal. Each path has input over-voltage protection and open transducer detection.

Agilent E1501A Datasheet (pdf)
Agilent E1501A Manual (pdf)

Part Number: E1413-63511

Product Family: 5998-01-507-3533, 5998015073533

The Agilent E1508A 8-Channel x16 Gain & 7 Hz Fixed Filter SCP provides eight fixed, 2-pole, low-pass filters with a 3 dB cutoff frequency of 7 Hz and eight amplifiers with a gain of 16. It also provides input over-voltage protection and open transducer detection on each channel.

Agilent E1508A Datasheet (pdf)
Agilent E1508A Manual (pdf)

Part Number: E1413-66518

The Agilent E1501A Direct Input (>100 kHz BW) Signal Conditioning Plug-on, the most basic of Agilent Technologies' SCPs, provides eight hardwired paths that buffer the input signal. Each path has input over-voltage protection and open transducer detection.

Agilent E1501A Datasheet (pdf)
Agilent E1501A Manual (pdf)

Part Numbers: E1413-66511, E1413-63511, E1413-63512

Product Family: 5998-01-507-3533, 5998015073533

This has the newer-style Agilent terminal block interface with the QUIC rails. There are no SCP modules installed. Please browse our inventory here: (Item #52336) for available SCP modules.

The Terminal Block is not included.

The Agilent E1513A 8-Channel Divide-by-16 Fixed Attenuator and 7 Hz Fixed Filter SCP provides eight fixed low-pass filters with a 3 dB cutoff frequency of 7 Hz and eight divide-by-16 attenuators. It also provides input over-voltage protection.

Agilent E1513A Datasheet (pdf)

The Agilent E1533A 16-Bit Digital I/O SCP provides 16 TTL compatible input/output lines. The 16 TTL bits are grouped as two, 8-bit "channels". Each channel can be configured as an 8-bit input port, or an 8-bit output port. When configured for output, each channel can be either passive (resistor) pull-up or active (transistor) pull-up.

Agilent E1533A Datasheet (pdf)

The Agilent E1510A 4-Channel Sample and Hold SCP provides four channels of sample and hold inputs, and four channels of direct inputs for the A/Ds. The sample and hold inputs sample all four channels simultaneously to reduce the skew introduced by scanning.

The SCP circuitry provides a voltage gain of 0.5, 8, 64, or 512 for each channel.

The low-pass filter on each sample and hold channel is a 6th order Bessel active RC filter used to provide alias protection and noise reduction. The filter cutoff frequencies are 1 kHz, 500 Hz, 250 Hz, 100 Hz, and 15 Hz.

Agilent E1510A Datasheet (pdf)
Agilent E1510A Manual (pdf)

SCP Modules and Terminal Block are sold separately. Please contact us for pricing and availability.
Product Family: 6625-01-645-8107, 6625016458107
This unit ships in the original manufacturer's box, with standard accessories and documentation. There are no SCP modules installed. Please browse our inventory here: (Item #52336) for available SCP modules.
The Agilent E1422A and its companion products, the E1529A and E1539A, provide a breakthrough in lower cost for automated strain measurements. The E1422A requires E1539A SCPs to control Remote Signal Conditioning Units like the E1529A/B Remote Strain Conditioning Unit.

Agilent E1539A Datasheet (pdf)
Agilent E1539A Manual (pdf)
Agilent E1539A Product Overview (pdf)

It ships with the E1419A-Kit, and Certificate of Calibration (done by Agilent on date of manufacture). No SCP modules are installed - please browse our other items or contact us if you are looking to purchase SCP modules for this card.
Product Family: 7025-01-491-6218, 7025014916218

There are no SCP modules installed. Please browse our inventory here: (Item #52336) for available SCP modules.

The terminal block is sold separately.
The Agilent E1531A 8-Channel Voltage Output SCP provides eight channels of non-isolated voltage source outputs. Each channel can source ± 16 V at up to 5 mA output current. The output voltage resolution is 16 bits (500 mV). Each output is current-limited to protect it from short circuits.

Agilent E1531A Datasheet (pdf)

Please browse our inventory here: (Item #52336) for available SCP modules.

The terminal block is included.
There are no SCP modules installed. Please browse our inventory here: (Item #52336) for available SCP modules.

The terminal block is sold separately.
Terminal block is not included. There are no SCP modules installed. Please browse our inventory or contact us for available SCP modules.
SCP Modules and Terminal Block are sold separately. Please contact us for pricing and availability.
This unit has the older-style Agilent terminal block interface (non-QUIC). There are no SCP modules installed. Please browse our inventory here: (Item #52336) for available SCP modules.

The non-QUIC terminal block is sold separately.

The E1536 provides 8 channels with individually programmable threshold levels of 5V, 12V, 24V, or 48V.

Agilent / HP E1536A Datasheet (pdf)

Part Number: E1536-66501

The Agilent E1503A 8-Channel Programmable Filter and Gain SCP provides eight programmable, 2-pole low-pass filters with cutoff frequency settings of 2, 10, and 100 Hz, as well as a 1.5 kHz "pass-through" mode (filter OFF). The eight programmable input amplifiers provide input voltage ranges of ± 0.25 V, ± 2 V, and ± 16 V. The E1503A SCP also provides input over-voltage protection and open transducer detection on each channel.

Agilent E1503A Datasheet (pdf)
Agilent E1503A Manual (pdf)

Part Number: E1413-66513
Product Family: 5998-01-484-1063, 5998014841063

The Agilent E1509A 8-Channel x64 Gain & 7 Hz Fixed Filter SCP provides eight fixed low-pass filters with a 3 dB cutoff frequency of 7 Hz and eight amplifiers with a gain of 64. It also provides input over-voltage protection and open transducer detection on each channel.

Agilent E1509A Datasheet (pdf)
Agilent E1509A Manual (pdf)

It ships with the Certificate of Calibration (done by Agilent on date of manufacture). No SCP modules are installed - please browse our other items or contact us if you are looking to purchase SCP modules for this card.
Product Family: 7025-01-491-6218, 7025014916218

This has the older-style terminal block interface (non-QUIC). There are no SCP modules installed. Please browse our inventory here: (Item #52336) for available SCP modules.

The Terminal Block is not included.

The Agilent E1508A 8-Channel x16 Gain & 7 Hz Fixed Filter SCP provides eight fixed, 2-pole, low-pass filters with a 3 dB cutoff frequency of 7 Hz and eight amplifiers with a gain of 16. It also provides input over-voltage protection and open transducer detection on each channel.

Agilent E1508A Datasheet (pdf)
Agilent E1508A Manual (pdf)

Part Number: E1413-66518

The Agilent E1507A 8-Channel 350 W Strain Completion & Excitation SCP provides strain completion and excitation voltages for 350 W bridges. Connections can be made for quarter-bridge, half-bridge, and full-bridge strain gage measurements.

Two SCPs are required to make strain gage measurements. The E1507A SCP provides the excitation signals and bridge connections and the other SCP, the sense SCP, makes the measurement connections (e.g., E1503A, E1508A, or E1509A).

Agilent E1507A Datasheet (pdf)

The Agilent E1507A 8-Channel 350 W Strain Completion & Excitation SCP provides strain completion and excitation voltages for 350 W bridges. Connections can be made for quarter-bridge, half-bridge, and full-bridge strain gage measurements.

Two SCPs are required to make strain gage measurements. The E1507A SCP provides the excitation signals and bridge connections and the other SCP, the sense SCP, makes the measurement connections (e.g., E1503A, E1508A, or E1509A).

Agilent E1507A Datasheet (pdf)

The AgilentE1532A 8-Channel Current Output SCP provides eight channels of non-isolated current source outputs. Each output can source ± 10 mA with up to 15 V compliance.

Agilent E1532A Datasheet (pdf)

Product Family: 5998-01-559-9583, 5998015599583

The Keysight / Agilent E1518A provides four programmable current source channels (with input over-voltage protection) for excitation. Each current source can be programmed to provide either 30μA or 433μA.

E1518A Datasheet (pdf)
E1518A Manual (pdf)

The Agilent E1506A 8-Channel 120 W Strain Completion & Excitation SCP provides strain completion and excitation voltages for 120 W bridges. Connections can be made for quarter-bridge, half-bridge, and full-bridge strain gage measurements.

Two SCPs are required to make strain gage measurements. The E1506A SCP provides the excitation signals and bridge connections and the other SCP, the sense SCP, makes the measurement connections (e.g., E1503A, E1508A, or E1509A).

Agilent E1506A Datasheet (pdf)

Part Numbers: E1506-66501, E1413-66516, E1413-63516

The Agilent E1511A provides four channels of strain measurements. It provides strain completion circuitry and excitation voltages, a programmable filter, and sample and hold circuitry. The sample and hold inputs sample all four channels simultaneously to reduce the skew introduced by scanning.

Agilent E1511A Datasheet (pdf)

There are no SCP modules installed. Please browse our inventory or contact us for available SCP modules.

An external Terminal Block interface is not included. Please browse our inventory or contact us if you are interested in obtaining a terminal block.

The HP E1504 Breadboard Signal Conditioning Plug-on allows you to create custom signal conditioning on up to eight HP E1413/E1313 channels. The board is primarily designed to help you implement custom filters and attenuators. Included on the board is overvoltage input protection circuitry, and SCP identification circuitry. The rest of the board area is for your custom circuitry.

Agilent E1504A Manual (pdf)

Part Number: E1413-63514

The HP E1514A is a Signal Conditioning Plug-on that provides four channels of galvanically isolated, fixed-gain amplifiers with fixed bandwidth filtering.

Agilent E1514A and E1515A User Manual (pdf)

Terminal block is not included.

Configuration:
• Installed SCP Modules: None
There are no SCP modules installed. Please browse our inventory or contact us for available SCP modules.

An external Terminal Block interface is not included. Please browse our
inventory or contact us if you are interested in obtaining a terminal block.

Configuration:
• Option 001: Expandable to 64 Channels

This has the newer-style Agilent terminal block interface with the QUIC rails as well as Option 202. There are no SCP modules installed. Please browse our inventory here: (Item #52336) for available SCP modules.

The Terminal Block is not included.

Breadboard has been used lightly (some end-user components installed on breadboard).

Agilent E1504A Manual (pdf)


These photos are representative of a lightly used breadboard:
Top of Breadboard
Bottom of Breadboard

Part Number: E1413-63514

Breadboard has been used moderately (end-user components installed on breadboard).

Agilent E1504A Manual (pdf)


These photos are representative of a moderately used breadboard:
Top of Breadboard
Bottom of Breadboard

Part Number: E1413-63514

The HP E1534A Frequency/Totalize/PWM SCP has eight channels. Each of the eight channels can be individually configured to perform input and output functions.

Agilent E1534A Datasheet (pdf)

This unit does not have the front cover; however, this will not prevent it from functioning properly.

There are no SCP modules installed. Please browse our inventory here: (Item #52336) for available SCP modules.

This unit does not have the front cover; however, this will not prevent it from functioning properly.

There are no SCP modules installed. Please browse our inventory here: (Item #52336) for available SCP modules.

The terminal block is sold separately.

59 / 59 Results
Contact Us
Fax:

(240) 376-1381