Items/Page
Showing 1-100 of 102 Results
This Inficon IPN 013-001 Oscillator is used and in excellent condition. It comes with a 6 in OSC cable, part number IPN 013-070.

This unit ships with accessories.

Accessories:

• Personality Board (16058-60003) as seen here
• Socket Board for Transistors (16058-60005) as seen here
• 28-Pin Dual In-Line Socket Board (16147-60002) as seen here
• 18-Pin Dual In-Lin Socket Board (16058-60007) as seen here
• (12) Miniature Banana Plug-Pin Leads (16058-61600) as seen here
• (8) Miniature Pin Plug-Pin Lead (16058-61601) as seen here
• (8) Miniature Clip Lead (16058-61602) as seen here

This unit ships with accessories.

Accessories:

• (1) Blank Teflon Board (16058-60004) as seen here.
• (1) Personality Board (16058-60003) as seen here.
• (1) 18-Pin Dual In-Line Socket Board (16058-60007) as seen here.
• (1) 28-Pin Dual In-Line Socket Board (16147-60002) as seen here.
• (2) Diodes Socket Board (16058-60008) as seen here.
• (1) 8-Pin Socket Board (16058-60009) as seen here.
• (1) 10-Pin Socket Board (16058-60010) as seen here.
• (1) 12-Pin Socket Board (16058-60011) as seen here.
• (14) Miniature Banana Plug-Pin Leads (16058-61600) as seen here.
• (8) Miniature Pin Plug-Pin Lead (16058-61601) as seen here.
• (8) Miniature Clip Lead (16058-61602) as seen here.
• (1) 24-Pin Male System Cable (16058-61604) as seen here.
• Accessory Case (16058-60100) as seen here.

This system cable has 24-pin male connectors used to connect the Vm and Vs channels of the 4145A to the 16058A. This cable enables the 4145A to detect whether the fixture lid is open or closed.
This cable is the miniature banana plugs to the pin plug leads for connecting measurement terminals to the Connection Switch on the Personality Board, or for connecting measurement terminals to the Socket Board.
This Queensgate DPT-C-S Digital Piezo Translator is used and in excellent condition.

Configuration:

• Range: >15 μm
• Response Time: 1 ms
• Linearity Error (Peak): ≤0.1%

This Socket Board has two transistor sockets for measurement of three lead or four lead bipolar transistors and FETs. Either of the devices connected to the sockets can be selected by the Connection Switch on the Personality Board.
Includes:
• Ultrapointe SDP Interface Card, Part Number: 009052
• Ultrapointe GIO Machine Interface Card, Part Number: 00048
This cable is the miniature clip lead to the pin plug leads for connecting a DUT to the measurement terminals on the Personality Board without using a DUT socket. The miniature clips permit connection of devices with non-standard shapes or lead arrangements.
This cable is the pin plug to the pin plug leads for connecting the Socket Board to the Connection Switch.
This unit ships with accessories.

Accessories:

• Personality Board (16058-60003) as seen here
• (2) Diodes Socket Board (16058-60008) as seen here.
• (1) 24-Pin Male System Cable (16058-61604) as seen here.

This socket board has two pairs of contacts for measurements of two-lead devices. The Narrow and Wide contacts fit devices shorter than 20mm and 30mm, respectively.
The 16058-60003 is the main test fixture board providing measurement connection terminals and Connection Switch. The board permits installation of one of the replaceable socket boards and construction of circuitry necessary for the desired measurement.
Configuration:
• Electrical Connectors: 16-Way CPC Plug

Part Number: D37360320
This Wafer Cassette holds Quantity 25 of 300mm wafers. It does not include any silicon wafers.

Example Part Number of a Full Cassette: 2ERWF-1306P
Part Number: 740-200-075, 740-200-076, 740-200-077, 740-200-078
Configuration
• Dimensions: 13.6 in. Width by 6 in. Depth by 13.9 in. Height
• Contrast Ratio: 300:1
• Native Resolution: 1024 x 768 at 75 Hz
• Monitor Color: Black

Part Number: LA-15R02-BK

This is also labeled as SiliconGraphics AT-101 Keyboard.

Part Number: 9500829
Configuration:
• CPU: Z0840004PSC

Part Number: 017-332
This Leybold / Inficon 751-102 is the XTC 751-001-G2 Deposition Controller Main Board.

Part Number: 751-100, 751-102
This unit only includes the exterior housing.
Configuration:
• Processor: 90 MHz Intel Pentium: A80502-90
• Memory: 2 x 96 MB, 2 x 64 MB
• Video Card: Meteor 571-0201

• Controller Card: Aved 99396
• Card: Computer Cards 508-261-1123
• Network Card: Computone 1-10016
• Includes CD ROM Drive and Floppy Drive
• Does Not Include Hard Drive

This MicroVision is the Microvision MVT 7080 Wafer Sorter Motion Control Module.
This MicroVision is the Microvision MVT 7080 Wafter Sorter Wafer Mapper Module.
Configuration
• Over Temp Reset
• Emergency Stop Button
• System On
• HVPS
This socket board is for measurement of 8-pin package devices.
This socket board is for measurement of 10-pin package devices.
Configuration:
• Indicating Bank Lens with Steady Signalling
• 1 x 1.5mm² (with 2 Wire Cable End)
• Made of Polycarbonate
This socket board is for measurement of 12-pin package devices.
Configuration:
• 128 KB of OTPROM
• 16 KB of CMOS Static RAM

Part Number: 244842-001
This socket board is for measurement of 28-pin package devices.
This was a custom configured VCA for the Kulicke & Soffa 9388 LaserPro.
The triaxial cable is used to connect the 16058A to an SMU channel of the 4145A. The triaxial cables ensure a complete shield against external noise interference.
Showing 1-100 of 102 Results
Contact Us
Fax:

(240) 376-1381