Configuration: (...)• Total Length and Mounting Option: 9 Meters System Length, DIN Mount • Agency Approval Option: Multiple Approvals
The GE / Bently 3300 XL 5/8mm Proximitor Sensor is compatible with all 5 and 8 mm 3300 and 3300 XL probes. The 3300 XL Proximitor Sensor incorporates numerous improvements over previous designs. Its physical packaging allows you to use it in high-density DINrail installations. You can also mount the sensor in a traditional panel mount configuration, where it shares an identical 4-hole mounting "footprint" with older Proximitor Sensor designs. The mounting base for either option provides electrical isolation and eliminates the need for separate isolator plates.
This unit does not include power supply, interface cables or software. Please contact manufacturer for pricing and availability.
(...)Configuration: • Sensor: Part Finding • Inspection Sensors: Presence, Measurement or Position • Maximum Inspection Rate: 400 Hz • Lighting and Filter Options: Integrated Red, Blue, Green, and Infrared LEDs; Integrated Bright White LEDs Polarization
Part Number: 821-0070-1R, 821-0070-3R, 825-0178-1R, C4G1-24G-E00
Configuration: • Coil Winding Insulation: H 180° • Temp Range: -20°C to 150°C • Duty Cycle: 100% ED. (Coil Temp 70°C at 20°C ambient) (...)• Protection: IP65 with Connector • Voltage Range: Standard Industrial Voltage 6 to 415VAC or DC
This National Instruments PXI-7358 8-Axis High-Performance Stepper/Servo Motion Controller is a demo unit that was installed but never put into commission.
This is a hybrid-slot(...) compatible PXI module that can be used in both PXI Express hybrid slots and standard PXI slots.
Configuration:
• PXI Module • 8 Axes
Part Numbers: 190974E-08, 190974F-08L, 190974G-08L, 778540-08
This Parker Compumotor SX6 Microstepping System is used and in excellent condition. (...) The SX series of Drives and Indexers utilize Compumotor's X-Language and have more complex built-in functioning. The SX6 Drive can be configured by on-board switches to be any of the following models:
If you would like an ATG technician to set the switches to configure the SX6 to one of these particular models, please let us know when placing the order.
If the High Voltage Home inputs are needed, please contact for pricing and availability.
Input Voltage: 120 V
This model is also known as the Electric Cylinder Control S5201.
The ZETA4 Drive can be configured by on-board switches to be any of the following models:
ZETA57-51, ZETA57-83, ZETA57-102, ZETA83-62, ZETA83-93, ZETA83-135 (...) If you would like an Artisan Technology Group technician to set the switches to configure the ZETA to one of these particular models, please let us know when placing the order.
The ZETA6104 Drive can be configured by on-board switches to be any of the following models: ZETA6104-57-51, ZETA6104-57-83, ZETA6104-57-102, ZETA6104-83-62, ZETA6104-83-93, ZETA6104-83-135 (...) If you would like an Artisan Technology Group technician to set the switches to configure the ZETA to one of these particular models, please let us know when placing the order.
This unit ships in the original manufacturer's packaging. Each Accelerometer has the CE, CSA, ATEX, and Brazil agency approvals engraved on the side casing.
(...)Configuration: • Mounting Thread Option: M8 x 1 Integral Stud
This Parker / Compumotor AH-DRIVE Microstepping System is used and in excellent condition. The AH (High) has a max current of 6A. The A Drive can be configured by on-board switches to be any of the(...) following models:
If you would like an ATG technician to set the switches to configure the A to one of these particular models, please let us know when placing the order.
This Lenze EPM-T110 CAN Gateway Module is used and in excellent condition.
Specifications:
• DC Voltage: 24 (...)• Connections: 9-Pin Sub-D • Optocoupler Electrical Isolation • Interface: System Bus CAN • Baud Rate: 10kBps to 1MBps • Numbers of Bus: Max 63 • Electronics Per Station: Max 32
Configuration: • Phases: 3 • Rated Connection Voltage: AC 380 V (-10%) to 480 V (+10%) (...)• Control Voltage/Power: DC 24 V (-15% / +25%) / 1A • Electronics Supply: Approx. 12 W • Ventilation: Natural Convection
This National Instruments PCI-7334 Motion Controller ships in the NI static bag. The PCI-7334 can control up to (4) axes of stepper motors. (...) Part Number: 190979C-04, 190979D-04L, 186307E-03, 186307C-06, 778417-01