Items/Page
Showing 1-100 of 226 Results
This unit is capable of taking extended sample trays. This unit is compatible with the Thermo / Kendro / Heraeus Cytomat 6001. The unit is also known as a Cytomat P23.This unit does not has a different back rail; see bottom view photo.

View Photo of Side View
View Photo of Bottom View

Tray Depth: 5.25 in (13.34 cm)

This VWR / Shel Lab 1535 General Purpose Incubator is used and in excellent condition. This system comes with the manufacturers operational manual.

Configuration:

• Chamber Dimensions: 24 x 24 x 20 in
• Chamber Capacity: 6.7 cu ft
• Line Voltage: 120 VAC Only
• Shelves are sold separately

View a photo of the inside here.

Part Number: 9120976

This Thermo Forma 1900031 Condensate Evaporator is used and in excellent condition. This unit includes a separate power cord. Used in models 3920, 3940, and 3911.

Input Voltage: 115V 60Hz

The inside of this unit can be seen here.

Features:
• 3 Adjustable, Perforated, Stainless Steel Shelves
• CO2 Inlet

Input Voltage: 120V only
This unit doesn't include keys.

Configuration:

• (2) 21-Slot Towers

• Temperature Range: Ambient+8 - 50 C

View Photo of this unit with the door open

This unit comes with an optical sensor attached to a 9-pin male connector. This unit also has self-adjustable placement.

View Photo of front angle of unit.
View Photo of top of unit.
View Photo of rear of unit.

This Lab-Line / Barnstead International Model 100 Incubator is used and in excellent condition.
Series I Model 3110:

• 3 Stainless Steel Chamber Shelves
• Reversible Door Swing

• Thermal Conductivity CO2 Sensor
• CO2 Inlet
• HEPA Filter

Voltage Input: 115 VAC Only

This Kuhner ISF-1-V Climo-Shaker Refrigerated Incubator and Platform Shaker is used and in excellent condition. The bottom unit has the cooling/refrigerated option while the top unit does not have the cooling option installed.

These units are stacked. They can be sold separately if requested.

Configuration:
• Temperature Range For Bottom Unit with Cooling Option: 15°C (59°F) - 60°C (140°F)
• Temperature Range For Top Unit without Cooling Option: Ambient - 60°C (140°F)
• RPM: 30 - 400 RPM
• Orbit: 25 mm
• Outside Dimensions (WxDxH): 1275 x 805 x 765 mm (50 x 32 x 30 inches)
• Inside Dimensions (WxDxH): 935 x 631 x 471 mm (37 x 25 x 19 inches)
• Volume: 350 liters
• Maximum Load: 25 kg (55 lbs)
• 2 Stainless Steel Humidity Pans Included per Shaker Unit
• Trays not included

Input Voltage: 208 VAC, Single-Phase, Only

View Photo of the tray mount.


This VWR / Shel Lab Incubator Shelf Mounting Brackets (Set of 4) are used and in excellent condition.

This Fisher Scientific Model 116885H CO2 Incubator is used and in excellent condition. This unit comes with (3) adjustable shelves.

Humidity Option Installed
This NuAire NU-5500 Direct Heat CO2 Incubator is used and in excellent condition.

Volume: 6.65ft3
Temperature Range: 5°C Above Ambient to 55°C


Dimensions:
• Internal: 25.5" H X 21.5" W X 21.0" D
• External: 39.5" H X 25.5" W X 26.5" D

(View Photo) of the (4) removable shelves.
(View Photo) of the (8) rails used to install the shelves.

Input Voltage: 115 V Only

This Thermo / Precision Scientific C1483 Incubator Gravity Oven is used and in excellent condition. This unit comes with one wire rack shelf. This unit was initially made for Curtin Matheson Scientific.

Input Voltage: 120 V
Input Current: 1.3 A
Input Frequency: 50/60 Hz
Max Temp: 75C

External Dimensions: 22" L X 22" W X 38.7" H (55.88cm L X 55.88cm W X 98.298cm H)
Internal Dimensions: 18" L X 17" W X 27.75" H (45.72cm L X 43.18cm W X 70.485cm H)

This Thermo / Kendro / Heraeus Cytomat 44 Power Voltage Regulator Board is new from surplus stock.

Part Numbers: 50060679-B, 50071417N, 50081355, 5506079-B, 57/130807
This Despatch Industries LAC 1-38A-6 Laboratory Convection Oven is used and in excellent condition.

LAC 1-38A-6 Configuration:
• Recirculating Fan CFM: 300

• Max Temp: 260 C (500ºF)
• Heater Watts: 1600

Chamber Size W x D x H: 18.75 x 18 x 19 (in)
Input Voltage: 120V

View Photo of Oven Chamber

This Eppendorf / New Brunswick Scientific I-2400 Digital Incubator Shaker is used and in excellent condition.

Part Number: M1283-0000, 14-728-2

Voltage: 120V
This VWR / Shel Lab 1565 General Purpose Incubator is used and in good condition.

These units are stacked and can be sold separately if requested.

Configuration:

• Dimensions of Each Chamber: 19.25 x 20 x 26 in
• Chamber Capacity: 5.8 cu ft
• Top Unit has Shelf Rack, 2 Shelves
• Bottom Unit is empty
• Line Voltage: 120 VAC Only

View Photo of inside of unit

This Precision Scientific Thelco 130D Laboratory Oven is used and in excellent condition.
This Thermo / Lindberg / Blue M VO914C Laboratory Vacuum Oven is new from surplus stock.

Configuration:

• 3 Shelves Included
• 1/4 in Vent Port
• 1/4 in Gas Inlet
• 3/8 in Vacuum Port
• 1 in NPT Vacuum Port
• Input Voltage: 220 VAC
• Chamber Dimensions: 14 x 9 x 9in (L x W x H)
• Overall Dimensions: 23.5 x 17.5 x 25.75in (L x W x H)
• Temperature Range: up to 260 C
• Yokogawa UT150 Temperature Controller

View Photo of oven chamber
View Photo of oven shelves
View Photo of UT150 temperature controller

This Thermo / Lindberg / Blue M 1430A 300 C Mechanical Convection Oven is used and in excellent condition.

Model Number: MO1430A-1

Configuration:

• Volume: 1.8 Cubic Feet (51.4 Liters)
• Temperature Range. +40°C to +300°C.
• Input Voltage: 120 VAC, 50/60 Hz, 1 Phase
• Power: 1000 Watts
• Cabinet Finish: Painted
• Air Changes: 125 per Hour
• Shelf Positions: 7
• Interior Dimensions W x D x H: 13 x 16 x 15 in (330 x 406 x 381 mm)
• Exterior Dimensions W x D x H: 25 x 22.5 x 37 in (640 x 572 x 940 mm)
• Weight: 180 lbs (82 kg)

Configuration:
• Outside Dimensions: (WxDxH) 1400 x 860 x 1900mm
• Inside Dimensions: (WxDxH) 957 x 625 x 1640mm
• Volume of Interior: 800 liter

• Weight: (without SF-X) 520kg
• Illumination: Halogen
• F-Tray with Fixed Clamps: (4) F-250 Trays (40 Clamps Each, 250 ml)

Input Voltage: 190-210 V, 50-60 Hz

View Photo of the shaker platform.


This Lab-Line Imperial III 302 General Purpose Incubator is used and in excellent condition.

Includes (2) Adjustible wire rack shelves.
The Magazine Lift is part of the Cytomats plate shuttle system and will accommodate nine plate stackers. This unit is also known as a Thermo Electron Corp Magazine Mit Lift Cytomat 6001 HS.

View Photo of front angle of unit.
View Photo of rear of unit.
View Photo of rear angle of unit.

Configuration:

• Temperature: 10°C to 50°C
• Auto Microplate Retrieval System with Hatch Door

• 9 removable 21-shelf racks
• Retrieval system can handle all standard microplate formats, including deep-well plates
• External cooling system heat exchanger installed (stock item 57670-4)
• Relative humidity display
• Connection for CO2
• Front panel fan control
• Thermal protector
• Door heating switch
• Gate heater

View Photo of the interior of this unit.
View Photo of the rear of this unit.

Input Voltage: 120 VAC

Series II Model 3110:

• Thermal Conductivity Sensor
• 2 Stainless Steel Chamber Shelves

• Reversible Door Swing
• Thermal Conductivity CO2 Sensor
• CO2 Inlet
• HEPA Filter

Voltage Input: 115 VAC Only

Series II Model 3110:

• 3 Stainless Steel Chamber Shelves
• Reversible Door Swing

• Thermal Conductivity CO2 Sensor
• CO2 Inlet
• HEPA Filter
• Humidity Pan

Voltage Input: 115 VAC Only

This Kuhner LT-W Lab Therm Table Top Incubator Shaker is used and in excellent condition. This model does not have the cooling system attached.

Configuration
• Temperature Range: Ambient +5°C to 80°C
• Shaking Motion: Orbital
• Shaking Diameter: 50 mm
• Shaking Speed: 20-300 rpm
• Tray Size: 420 x 420 mm

Input Voltage: 220-240 VAC

View Photo of Shaker Platform

This Espec LHU-113 Balanced Temperature and Humidity Control System is used and in excellent condition.

Configuration:

• Input Voltage: 115 VAC
• Temp. Control Range: −20 to +85 °C (−4 to +185 °F)
• Humidity Control Range: 40 to 95 % rh
• Refrigerant: HFC134a
• Capacity: 105 L
• Three Shelve Adjustable Rack
• Two Shelves

Outside Dimensions (W x H x D): 25.6 x 42.9 x 31.7 in
Inside Dimensions (W x H x D): 19.7 x 23.6 x 15.4 in

View Photo of the LHU-113 Chamber.
View Photo of the LHU-113 Chamber with Glass Door and Humidity Wiper.

Configuration:

• Temperature: 4°C to 50°C
• Auto Microplate Retrieval System with Hatch Door

• Retrieval system can handle all standard microplate formats, including deep-well plates
• Cryostate
• Relative humidity display
• Connection for CO2
• Door heating switch

View Photo of the interior of this unit.
View Photo of the rear of this unit.

Voltage: 120V

This Delta Design 9023 Environmental Test Chamber is used and in good condition. It has been tested and is fully operational.

This unit has a custom hinged plexiglass door w/access port.


Note: Requires liquid CO2 to cool from ambient.

The control panel is cracked.

Configuration:

• Temperature: 4°C to 50°C

• Auto Microplate Retrieval System with Hatch Door
• Retrieval system can handle all standard microplate formats, including deep-well plates
• Cryostate
• Relative humidity display
• Connection for CO2
• Door heating switch
• Gate heater

View Photo of the interior of this unit.
View Photo of the crack in the control panel.

Voltage: 120V

Part Number: M1024-0000

View Photo of the inside of the incubator.

This VWR / Shel Lab 1545 General Purpose Incubator is used and in excellent condition. This unit ships with three shelves.

Configuration:

• Chamber Dimensions: 20 x 20 x 26 in
• Chamber Capacity: 6.0 cu ft
• Line Voltage: 120 VAC Only

View a photo of the inside here.


This Lab-Line 460 NS Water-Jacketed Automatic CO2 Incubator is used and in excellent condition.

Input Voltage: 120 V
Input Amps: 5.4 A
Input Frequency: 60 Hz

Input Wattage: 650 W

This Harvard Apparatus PDMI-2 Open Perfusion Micro-Incubator is used and in excellent condition.

Part Number: 65-0043
This Thermo / Kendro / Heraeus BB 6220 Gas Jacketed CO2 Incubator is used and in excellent condition.

Configuration:
• Opt. CU: CO2 Inlet

• Lockable Door with Reserve Key
• 6 individual gas-tight glass operating doors
• (6) small copper shelves
• Copper inner casing
• Gas Jacketed heating
• Input Voltage: 120 VAC

This Thermo / Heraeus HERAcell 150 Incubator is used and in excellent condition.

Input Power: 120 VAC


View Photo of inside of incubator.

This NuAire NU-5500 Direct Heat CO2 Incubator is used and in excellent condition.

Volume: 6.65ft3
Temperature Range: 5°C Above Ambient to 55°C


Dimensions:
• Internal: 25.5" H X 21.5" W X 21.0" D
• External: 39.5" H X 25.5" W X 26.5" D

(View Photo) of the (3) removable shelves.
(View Photo) of the (6) rails used to install the shelves.

Input Voltage: 115 V Only

This SciGene / Robbins Scientific 400 Hybridization Incubator is used and in excellent condition.

P/N: 1040-60-1

Tube Capacity: 10

Input Voltage: 115 V
This Saunders Temperature Test Chamber is used and in excellent condition. This unit includes a Saunders Model 2250 Control Panel.

Input Voltage: 110 VAC Only
This Kuhner ISF-4-VM Clim-O-Shake Incubator is used and in excellent condition. This unit does have one control panel that has ink spots; however, this does not affect its ability to function properly.

Configuration:
• Outside Dimensions: (WxHxD) 1400 x 1900 x 860 mm
• Weight: (with 4 Shaker Units) 760 kg
• Timer
• Humidifier
• Supervision
• Door Heaters

Input Voltage: 208 V, 50-60 Hz

View Photo of ink spots on control panel.

This unit has a 2 - 3 week lead time.

This Fisher Isotemp 525D Economy Lab Incubator is used and in excellent condition.

Catalog Number: 11-690-525D
Capacity / Interior Volume: 2.5 ft3

Temperature Range: 30 to 75 C

Input Voltage: 120 VAC only

This Thermo / Precision Scientific Model 5EG Economy Incubator is used, and in excellent condition. This unit comes with (2) Shelves.

Specifications:

• Chamber Volume: 4.5 cu. ft.
• Convection Technique: Gravity
• Temperature Control: Electronic
• Temperature Range: Ambient +5°C to 65°C
• Temperature Uniformity: 0.75°C
• Temperature Stability: 0.5°C
• Recovery Time: 15 Minutes
• Chamber Dimensions W x L x D: 18.5" x 27.25" x 16"
• Exterior Dimensions W x L x D: 24" x 38" x 21.25"
• Input Power Voltage Plug: 115VAC

This VWR / Shel Lab 5216 Signature Series Air Jacketed CO2 Incubator is new from surplus stock. This unit includes a drip tray, three shelves, six rails, and Hepa filter.

Part Number: 9120966

Dimensions:
Outer: 25" W x 27" D x 28" H
Inner: 19" W x 20" D x 26" H

(View Photo) of the (3) removable shelves.
(View Photo) of the (6) rails used to install the shelves.
(View Photo) of the Drip Tray.
(View Photo) of the Hepa Filter and humidity pan.

Input Voltage: 115 V Only

This unit is compatible with the Thermo / Kendro / Heraeus Cytomat 6001. The unit is also known as a Cytomat P23.

View Photo of Side View

Tray Depth: 4 in (10.16 cm)

This Thermo / Forma 3950 Reach-In CO2 Incubator is used and in excellent condition. This unit has a dual port outlet inside that can be used to plug in shakers, rollers and other things that need power. This unit comes with one shelf, a corner mount, and wall brackets.
This Kuhner ISF-1-V Climo-Shaker Refrigerated Incubator and Platform Shaker w/ Cooling Option is used and in excellent condition.

This unit has the cooling/refrigerated option installed.

Configuration:
• Cooling Option Temperature Range: 15°C (59°F) - 60°C (140°F)
• RPM: 30 - 400 RPM
• Orbit: 25 mm
• Outside Dimensions: 1275 x 805 x 765 mm (50 x 32 x 30 inches)
• Inside Dimensions: 935 x 631 x 471 mm (37 x 25 x 19 inches)
• Volume: 350 liters
• Maximum Load: 25 kg (55 lbs)
• 2 Stainless Steel Humidity Pans Included
• Trays not included

Input Voltage: 208 VAC, Single-Phase, Only

View Photo of the tray mount.


Series II Model 3140:

• Reversible Door Swing
• Infrared CO2 Sensor

• Fuel Cell O2 Sensor (Japan Storage Battery Model KE-25 O2 Sensor)
• CO2 Inlet
• N2 Inlet
• No HEPA Filter
• No Shelves or shelf frame
• No Water Pan

Input Voltage: 120 VAC Only

You can order replacement HEPA filters, shelves, and shelf frames from Thermo.
Fuel Cell O2 Sensor: Catalog number 290083
HEPA filter: Catalog number 760175 and is priced around $40.00
Individual Shelf: Catalog number 190884. Includes (1) shelf and (2) shelf channels
Shelf Frame: Catalog number 190670. Includes (8) shelf channels and (1) left and (1) right shelf frame panel

GS Yuasa / Japan Storage Battery KE-25 Datasheet (pdf)

This unit is compatible with the Thermo / Kendro / Heraeus Cytomat 6001. This unit has an open-sided design and stainless steel shelves. The unit is also known as a Cytomat P23.

View Photo of Stainless Steel Shelves

Tray Depth: 5.25 in (13.34 cm)

This New Brunswick Scientific Innova 4340 Illuminated Refrigerated Incubator Shaker is used and in good condition. The unit cooled to only 4 C°.

Configuration:
• Platform Size: 18 x 30 inches (45.72 x 76.2 cm)
• Maximum Capacity 2509 mL Flasks on Universal Platform: 30
• Capacity and Largest Flask Size on Universal Platform: 4 x 6L
• Orbit Diameter: 1.0 inch (2.54 cm)
• Temperature Range: A -15 to 60 C°
• RPM Range: 25 to 500
• Programmable Operation: Temperature and Lights
• Photosynthetic Illumination: (6) 30-Watt Gro-Lux Lamps, 7-Day 24 Hr Electronic Clock Timer Programs up to 24 Events, Simulate Daytime or Nighttime

Input Voltage: 120 VAC Only

Configuration:
• Outside Dimensions: (WxHxD) 1400 x 1900 x 860 mm
• (1) Shaker Units Installed
• Timer

• Humidifier
• Door Heaters

Input Voltage: 190-210 V

This unit has a 2 - 3 week lead time.

This Thermo / Forma Scientific 310 / 370 Direct Heat / Steri-Cycle Stacked CO2 Incubators is used and in excellent condition. This unit is a 370 Steri-Cycle Incubator stacked on top of a 310 Direct Heat Incubator. These units can be separated and sold individually upon request.

310 Configuration:

• Interior Construction: Stainless Steel
• CO2 Sensor Type: Thermal Conductivity
• Electrical: 115 VAC, 50/60 Hz, 2.4 FLA
• 3 Stainless Steel Trays, Stainless Steel Humidity Tray
• HEPA Filter Airflow System
• Temperature Range: 5 °C Above Ambient to 50 °C
• Temperature Control: ±0.1 °C
• CO2 Range: 0-20%
• CO2 Control: Better Than ±0.1%
• Chamber Dimensions: 21.4" W x 26.8" H x 20.0" F-B (54.4cm x 68.1cm x 50.8cm)

370 Configuration:

• Interior Construction: Stainless Steel
• CO2 Sensor Type: Thermal Conductivity
• Electrical: 115 VAC, 50/60 Hz, 9.6 FLA
• 3 Stainless Steel Trays, Plastic Humidity Tray
• HEPA Filter Airflow System
• Temperature Range: 5 °C Above Ambient to 50 °C
• Temperature Control: ±0.1 °C
• CO2 Range: 0-20%
• CO2 Control: Better Than ±0.1%
• Sterilization Cycle Sensor: Precision Thermistor
• Sterilization Cycle Temperature: 140 °C
• Sterilization Cycle Length: Under 12 Hours
• Chamber Dimensions: 21.3" W x 26.8" H x 20.0" F-B (54.1cm x 68.1cm x 50.8cm)

Thermo / Forma Scientific 370 Datasheet (pdf)
Thermo / Forma Scientific 370 Manual (pdf)

This unit has an open-sided design and stainless steel shelves.
This VWR / Shel Lab 5015 General Purpose CO2 Incubator is used and in excellent condition. This unit contains 3 stainless steel shelves. This unit does not include feet. Please contact manufacturer for pricing and availability.

Part Number: 9120917

Dimensions:
Outer: 26.5" W x 27" D x 36.5" H (70.225 W x 71.55 D x 96.725 H cm) (no feet attached)
Inner: 19.5" W x 20" D x 25" H (51.675 W x 53 D x 66.25 H cm)

Input Voltage: 120 V Only

This Lab-Line / Barnstead Imperial V Laboratory Oven Model 3481M is used, and in excellent operational condition. Because the exterior has some visible wear in the form of scratches and small dents we consider it to be in good physical condition. 1300 Watts. (2) Wire Shelves.
This NuAire NU-4850 US Autoflow Water Jacket Humidified CO2 Incubator is used and in excellent condition.

Configuration:

• Optional Wheels Installed
• Chamber Volume: 6.63 ft3 (188 L)
• Exterior Dimensions: 35.0" H x 31.0" W x 25.5" D (889 mm x 787.4 mm x 647.7 mm)
• Interior Dimensions: 25.5" H x 21.5" W x 21.0" D (647.7 mm x 546.1 mm x 533.4 mm)
• Electrical: 115 VAC / 60 Hz
• Water Jacket: 20 gallon (75.7 L) Capacity
• Temperature Range: 5°C above ambient to 55°C
• Temperature Sensitivity: ±0.125°C
• Temperature Accuracy: ±0.0125°C
• CO2 Range: 0.1 - 20 %
• CO2 Accuracy: ±0.1 %
• CO2 Sensor Type: Infrared
• RH Range: 5 % above ambient to 95 %
• RH Accuracy: ±3.0 %

This VWR / Shel Lab 1565 General Purpose Incubator is used and in excellent condition. This unit has a custom temperature control button.

These units are stacked and can be sold
separately if requested.

Configuration:
• Dimensions of Each Chamber: 19.25 x 20 x 26 in
• Chamber Capacity: 5.8 cu ft
• Line Voltage: 120 VAC Only

View a photo of the custom temperature control here.

View a photo of the inside of the unit here.

VWR Catalog Number: 35823-300

This VWR / Shel Lab 1565 General Purpose Incubator is used and in excellent condition. This unit ships with (4) removable shelves.

These units are stacked and can be sold separately if
requested.

Configuration:
• Dimensions of Each Chamber: 19.25 x 20 x 26 in
• Chamber Capacity: 5.8 cu ft
• Line Voltage: 120 VAC Only

View a photo of the inside of the unit here.

Part Number: 9120846
VWR Catalog Number: 35823-300

This unit is capable of taking extended sample trays. This unit is compatible with the Thermo / Kendro / Heraeus Cytomat 6001. The unit is also known as a Cytomat P23. This unit does not have a different back rail; see bottom view photo.

View Photo of Side View
View Photo of Bottom View

Tray Depth: 5.25 in (13.34 cm)

This Liconic Instruments STX40-HC Humid Cooler is used and in excellent condition.

Configuration:
• Temperature Range: 04 - 25°C

• Relative Humidity: ~ 90%
• (2) Removable MTP Hotels

Input Voltage: 115 / 230 VAC

Features:
• 3 Adjustable, Perforated, Stainless Steel Shelves
• CO2 Inlet

• Option 1900024: Caster Dolly for Model 3033 (3035), includes four 2.0"H (5.1cm) swivel casters and two front adjustable levelers, supports one or two (stacked) incubators, 40.2"W x 3.0"H x 31.3"F-B (102.1cm x 7.6cm x 79.5cm)

Input Voltage: 120V only

This Affymetrix GeneChip Hybridization Oven 640 is new from surplus stock. It ships in the original packaging and includes power cord, manual, Purple Cartridge Carrier (P/N: 200291), Green Cartridge Carrier (P/N: 200290), White Cartridge Carrier (P/N: 200292), and Red Cartridge Carrier (P/N: 200289) seen here. This unit is the 110V version. It is still in the manufacturer's box, and only the box has signs of wear from being in storage.

Model Number: H010115
Part Number: 800138

This VWR Signature Reach-In Incubator Model 1915A is used and in good condition. This unit comes with (6) adjustable shelves. The shelves and the cabinet bottom have some small rust corrosion that can be viewed here.

Model Number: 1915A

This unit includes keys.

Configuration:
• (2) 21-Slot Towers
• Barcode Scanner

• Temperature Range: 15 - 50 C


View Photo of this unit with the door open.

View Photo of the top of this unit.

View Photo of the barcode scanner.

This Thermo / Forma Scientific Model 3250 Water Jacketed Incubator is used and in excellent condition. Unit does not come with humidity pan.

Configuration:

• Water Jacket Volume: 11.7 Gallons (44.3 Liters)
• Temperature Range: +5°C to +50°C
• CO2 Range: 0 - 20%
• Humidity Control: Ambient to 95%
• Stainless Steel
• 3 Shelves

Dimensions:
Internal: 18" W x 19" D x 25.75" H (45.72cm W x 48.26cm D x 65.405cm H)
External: 24.5" W x 27" D x 36.5" H (62.23cm W x 68.58cm D x 92.71cm H)

This Baxter / Lab-Line TempCon Oven N8620-1A is used, and in excellent condition. It comes with (3) wire rack shelves.

Features:
• Lab-Line Model: N8620-1A

• Gravity Oven
This New Brunswick Scientific G-27 PsycroTherm Controlled Environment Incubator Shaker is used and in excellent condition. This unit does not have the optional light manifold for photosynthetic studies installed.
This Bellco Glass 7728-59005 Roll-In Incubator is used and in excellent condition.

Configuration:
• Maximum Temperature: 50 Degrees Celsius

• Input Power: 115 VAC


This Thermo / Forma Scientific 3860 Stackable Steri-Cult CO2 Incubator is used and in excellent condition.

Configuration:

• 3 Adjustable, Perforated, Stainless Steel Shelves
• CO2 Inlet

This Thermo Hybaid HS9360 Hybridization Oven is used and in excellent condition. It comes with a rotisserie for holding four 70mm bottles of at least 150mm in length and a drip tray.
This Fisher Isotemp Oven 100 Series Model 126G is used and in good condition.
Access panel fiber-glass cover missing.

Features:
• 3 Adjustable, Perforated, Stainless Steel Shelves

• CO2 Inlet

View Photo of interior of unit.

Input Voltage: 120V only

This VWR 1500E Economy Incubator is used and in excellent condition.

• Volume L (cu. ft.): 28.3 (1)

• Interior Dimensions, W x D x H, cm (in.): 30.5 x 30.5 x 30.5 (12 x 12 x 12)
• Exterior Dimensions, W x D x H, cm (in.): 43 x 44.5 x 49.5 (17 x 17.5 x 191/2)
• Two Shelves & Brackets Included

• Electrical: 110V, 50/60Hz, 330W

Configuration:
• Type: Thermal Conductivity
• Chamber: Single, 120 V
• Capacity: 6.7 Cu.Ft.
• Exterior Dimensions: 26.5 W x 26 D x 40 H in.

• Interior Dimensions: 20.5 W x 20 D x 28 H in.
• Shipping Weight: 280 lbs

Included Parts and Accessories
• Shelves: 3
• Glass Humidity Pan: 1
• CO2 Inlet: 1

Series I Model 3110:

• 3 Stainless Steel Chamber Shelves
• Humidity Pan

• Reversible Door Swing
• Thermal Conductivity CO2 Sensor
• CO2 Inlet
• HEPA Filter

Voltage Input: 115 VAC Only

View Photo of Side View
View Photo of Bottom View

Tray Depth: 5.25 in (13.34 cm)

This unit is compatible with the Thermo / Kendro / Heraeus Cytomat 6001. This unit has an open-sided design and stainless steel shelves. The unit is also known as a Cytomat P23.

View Photo of Stainless Steel Shelves

Tray Depth: 5.25 in (13.34 cm)

This Kuhner ISF-1-V Climo-Shaker Incubator and Platform Shaker is used and in excellent condition.

Configuration:

• Temperature Range Ambient - 60°C (140°F)
• RPM: 30 - 400 RPM
• Orbit: 25 mm
• Outside Dimensions: 1275 x 805 x 765 mm (50 x 32 x 30 inches)
• Inside Dimensions: 935 x 631 x 471 mm (37 x 25 x 19 inches)
• Volume: 350 liters
• Maximum Load: 25 kg (55 lbs)
• 2 Stainless Steel Humidity Pans Included
• Trays not included

Input Voltage: 208 VAC, Single-Phase, Only

View Photo of the tray mount.


The Magazine Lift is part of the Cytomats plate shuttle system and will accommodate nine plate stackers. This unit is also known as a Kendro Magazine Mit Lift Cytomat 6000 HS.

View Photo of front angle of unit.
View Photo of rear of unit.
View Photo of rear angle of unit.

This unit has a damaged front interface; however, this does not affect functionality in any way. This unit doesn't include keys.

Configuration:
• (2) 21-Slot Towers
• Barcode Scanner
• Temperature Range: 15 - 50 C

View Photo of this unit with the door open

View Photo of scuffed front face.
View Photo of scuffed cal button.

Input Voltage:120V Only

Series II Model 3110 (top unit):

• Thermal Conductivity Sensor
• 4 Stainless Steel Chamber Shelves

• Reversible Door Swing
• Thermal Conductivity CO2 Sensor
• CO2 Inlet
• HEPA Filter

Series II Model 3110 (bottom unit):

• Thermal Conductivity Sensor
• 3 Stainless Steel Chamber Shelves
• Reversible Door Swing
• Thermal Conductivity CO2 Sensor
• CO2 Inlet
• HEPA Filter
• No Water Pan

These units are stacked. They can be sold separately if requested.

View Photo of the inside of the unit.

Voltage Input: 115 V

Series II Model 3110 (top unit):

• Thermal Conductivity CO2 Sensor

• 3 Stainless Steel Chamber Shelves
• Reversible Door Swing
• TC Tempetature Sensor
• CO2 Inlet
• HEPA Filter
• No Water Pan

Series II Model 3110 (bottom unit):

• Thermal Conductivity CO2 Sensor
• 2 Stainless Steel Chamber Shelves
• Reversible Door Swing
• TC Temperature Sensor
• CO2 Inlet
• HEPA Filter
• No Water Pan

These units are stacked. They can be sold separately if requested.

View Photo of the back of the inside of the top unit.

View Photo of the back of the inside of the bottom unit.

Voltage Input: 115 V

This unit comes with an optical sensor and a UBZ1601 photoelectric sensor attached to a 9-pin male connector. This unit also has self-adjustable placement.

View Photo of front angle of unit.
View Photo of top of unit.
View Photo of rear of unit.

This Thermo / Revco RCC3000T-5-VBC CO2 Incubator is new from surplus stock.

Configuration:
• 220 VAC Only
• Chamber: Single

• Chamber Capacity: 93 L (3.3 Cu. ft.)
• Interior Dimensions: 16.1 H x 17.9 D x 20.0 W inches (409 x 455 x 508mm)
• Weight: 260 lb. (118 kg)
• Operating Temperature: 5 C above ambient temperature to +40 C

Included Parts & Accessories:
• User Manual
• Humidity Pan
• 2 Shelves
• 2 Sets of Shelf Rails
• Water Conditioning Crystals for Water-Jacket
• Water-Jacket Fill Tubing
• HEPA Filter

Click here to view a photo of the included parts

This Sanyo MCO-17AI CO2 Incubator is used and in excellent condition. This unit has an air jacket as its heating method.

Includes:
• Humidifying Pan

• Fan
• Door Heater
• Alarm
• 2 Shelf Racks
• 6 Tray Supports

View Photo of the inside of the unit.
View Photo of the inside of the unit with shelf rack and tray supports installed.
View Photo of shelf racks.
View Photo of a tray support.

Input Voltage: 110-120 VAC

These VWR Incubator Feet are used and in good condition.

Configuration:
• 1 Inch of Coarse Threading
• 1 Inch Diameter of Wax Caster

• Includes 4 Units per Purchase
This Gallenkamp INC.200.230T Plus Incubator is used, and in excellent condition. Outer dimensions are 37" Wide x 22" Deep x 40" Tall. Chamber dimensions are 22" Wide x 18" Deep x 33" Tall. There are two adjustable shelves in the unit. The clear plexiglass door allows the user to see inside the unit without opening. There is a 'Quick Access' sub door on the larger plexiglass door that allows access to the lower portion of the incubator without opening the entire door. The door seal is in excellent condition. This item is easy to operate. The unit displays the current inside temperature. The temperature can be set up to 105 C. The safety thermostat temp control can be set from 30 C to 110 C. There is a power switch, and integrated cord (110/120 VAC standard plug).

Power: 500 W; 115VAC
Cat #: INC.200.230T
S/N: SG92/06/440
Made in the UK

ASC Tech Notes:
Incubator works great, interior is very clean.
Gallenkamp is now owned by Sanyo Corporation.

This Sanyo MCO-17AIC CO2 Incubator is used and in excellent condition. This unit has a DHA system that contains a heater jacket and an air jacket system for its heating method.

Includes:
• Humidifying Pan
• Fan
• Door Heater
• Alarm
• 3 Shelf Racks
• 6 Tray Supports

View Photo of the inside of the unit.
View Photo of the inside of the unit with shelf rack and tray supports installed.
View Photo of shelf racks.
View Photo of a tray support.

Input Voltage: 110-120 VAC

This unit has a digital manual control and does not come with a relative humidity display.

Configuration:

• Temperature: 10°C to 50°C
• Auto Microplate Retrieval System with Hatch Door
• Retrieval system can handle all standard microplate formats, including deep-well plates
• External cooling system heat exchanger installed (stock item 57670-4)
• Connection for CO2
• Front panel fan control
• Thermal protector
• Door heating switch
• Gate heater

View Photo of the interior of this unit.
View Photo of the rear of this unit.

Input Voltage: 120 VAC

Configuration:

• Temperature: 10°C to 50°C
• 9 removable 21-shelf racks

• Retrieval system can handle all standard microplate formats, including deep-well plates
• Relative humidity display
• Connection for CO2
• Front panel fan control
• Thermal protector
• Door heating switch
• Gate heater

View Photo of the interior of this unit.
View Photo of the rear of this unit.

Input Voltage: 120 VAC

This unit has a digital manual control and does not come with a relative humidity display.

Configuration:

• Temperature: 10°C to 50°C
• Auto Microplate Retrieval System with Hatch Door
• 9 removable 21-shelf racks
• Retrieval system can handle all standard microplate formats, including deep-well plates
• External cooling system heat exchanger installed (stock item 57670-4)
• Connection for CO2
• Front panel fan control
• Thermal protector
• Door heating switch
• Gate heater

View Photo of the interior of this unit.
View Photo of the rear of this unit.

Input Voltage: 120 VAC

Included in this item is an external lift and remote RS232 interface.

Configuration:

• Temperature: 10°C to 50°C
• Retrieval system can handle all standard microplate formats, including deep-well plates
• Relative humidity display
• Connection for CO2
• Front panel fan control
• Thermal protector
• Door heating switch
• Gate heater

View Photo of the interior of this unit.

Input Voltage: 120 VAC

This Thermo / Forma Scientific 3310 Steri-Cult Series CO2 Incubator is used and in excellent condition.

Configuration:
• Input Power: 115 VAC

• Capacity: 11.4 Cubic Feet
• Typical Operation: 848 BTUH
• Sterilization Cycle Operation: 2544 BTUH
• Maximum Temperature: 50° Celsius

View Photo of inside of incubator.

This unit has some cosmetic marring to one of the the tray mounts; however, this does not affect its ability to function properly.

Configuration:

• Outside Dimensions: (WxDxH) 1400 x 860 x 1900mm
• Inside Dimensions: (WxDxH) 957 x 625 x 1640mm
• Volume of Interior: 800 liter
• Weight: (without SF-X) 520kg
• Illumination: Halogen
• (3) SF-W Shaking Units

Input Voltage: 190-210 V, 50-60 Hz

View Photo of the tray mount.


This Thermo / Forma Scientific 310 Direct Heat CO2 Incubator is used and in excellent condition.

310 Configuration:

• Interior Construction: Stainless Steel
• CO2 Sensor Type: Thermal Conductivity
• Electrical: 115 VAC, 50/60 Hz, 2.4 FLA
• 3 Stainless Steel Trays, Stainless Steel Humidity Tray
• HEPA Filter Airflow System
• Temperature Range: 5 °C Above Ambient to 50 °C
• Temperature Control: ±0.1 °C
• CO2 Range: 0-20%
• CO2 Control: Better Than ±0.1%
• Chamber Dimensions: 21.4" W x 26.8" H x 20.0" F-B (54.4cm x 68.1cm x 50.8cm)

View Photo of the inside of the unit.

This Thermo / Queue Systems QWJ300DABA Cellstar CO2 Water Jacketed Incubator is used and in excellent condition. This unit is a double stack incubator. They cannot, however, be separated. The top unit includes shelf cage, 10 shelf rails and 5 shelves. The bottom unit does not include any cages, rails or shelves. Contact Thermo for pricing and availability for more shelving.

Configuration:
• Top Chamber Dimensions: 19.75 x 19.75 x 24 in (L x W x H)
• Bottom Chamber Dimensions: 20 x 21.25 x 24 in (L x W x H)
• Exterior Dimensions: 25.5 x 25.25 x 68.25 in (L x W x H)
• Electrical Input: 115 V
• CO2 Gas Input: 15 PSIG Max

View Photo of top incubator with shelves
View Photo of bottom incubator

Model Number: QWJ300DABA

Showing 1-100 of 226 Results
Contact Us
Fax:

(240) 376-1381