Items/Page
Showing 1-100 of 943 Results
This Hamamatsu H7422P-50 Photosensor Module is used and in excellent condition. This unit does not have the heatsink and fan attached. Power Supply not included.

Configuration:

• 380 nm to 890 nm Spectral Response
• 2 µA Maximum Output Signal Current
• GaAs Photocathode
• 12% QE at Peak Wavelength
• High Gain (P Type)

Configuration:
• Resolution (HxV Pixels): 659x494
• Sensor: Sony ICX414

• Sensor Technology: Progressive Scan CCD
• Sensor Size (Optical): 1/2"
• Pixel Size (;micro;m): 9.9x9.9
• Frame Rate: 74

Part Number: 103905-14, 103906-14

C-Mount Lens not included.

Configuration:
• Resolution: 656 x 491
• Pixel Size: 9.9 x 9.9 μm

• Frame Rate at Full Resolution: 60 fps / 100 fps
• Mono/Color: Mono
• Gain Control: 0-12 dB

Part Numbers: A602f, A602f-2

Optional sample Clamp is not included.

Parts and Accessories:

• (1) Port Insert for Glass Sample Cup (P/N:A02-1010-316)
• (1) Black Glass Tile for Calibration
• (1) 0°/45° Fluorescent Standard (P/N:LX16521)
• (1) Diagnostic Tile: Illuminant D65 10° Observer(P/N:LX16521)
• (1) 10° Color Standard (P/N:LX16521)
• (1) Tile Carrying Case
• (1) RS-232 Cable for Computer Connection

View Photo of the Parts and Accessories.

Configuration:
• CCD Sensor: 1/2 inch
• Standard: US
• Sensitivity: 4000 lx F4, 3200K
This Hamamatsu C2741 Camera Controller is used and in excellent condition. This unit has the newer style front panel with digital displays for the Contrast Enhancement controls.
This Hamamatsu C2741-03 Infrared Vidcon Camera is used and in excellent condition. The controller and cables are sold separately.

Spectral Response: 400-1800 nm


A representation of a screen shot using the C2741-03 camera can be seen here

Configuration
• Typical Processor Performance: 1623 MIPS
• Digital I/O Lines: 29
• Cameras: Up to 3
• Resolution: Up to 2000 x 2000

• Frame Rate: Up to 100 fps
• Nonvolatile Storage: 146 MB

Part Number: 189139D-05, 189139E-05, 778986-01

This Newport 8753 Intelligent Picomotor Driver is used and in excellent condition.
This Sofradir / Electrophysics MicronViewer 7290A Near-Infrared CCTV Camera is used and in excellent condition. Lens and power cable sold separately.
This unit has a 25-Pin female DSub Host I/F connector.

Voltage: 115V 60Hz
Configuration:
• Travel: 0.25 in.
• Load Capacity: 6 lbs.
Configuration:
• Main Discharge Capacitance: 0.47µF ±10%
• Input Voltage: 15 - 28 VDC
• DC Current: < 1.4-Amps @ 24V

• Power Discharged: 20 Watts Max

Part Number: 714614, 323905, 502-1130-3

This Schott / Fostec ACE Light Source is used and in good condition.

Model: 20500.2, C30507.01
Input Voltage: 120 V
Lamp*: Free Halogen Lamp Included (Non-Specific)

Connector Diameter: 0.75" (1.905 cm)

*If specific lamp is required, please contact manufacturer for pricing and availability.

This Hamamatsu C2741 Camera-to-Controller Cable is used and in excellent condition. This cable has the large 16-pin camera connectors. This cable works with the C2400, C2741, and others.

Approximate Length: 5.5 Meters
Configuration:
• Resolution (HxV Pixels): 1392x1040
• Sensor: Sony ICX285

• Sensor Technology: Progressive Scan CCD
• Sensor Size (Optical): 2/3"
• Pixel Size (;micro;m): 6.45x6.45
• Frame Rate: 30
• Lens Mount: CS-Mount

Part Number: 104170-19

This Ikegami CCU-20DI Camera Control Unit is new from surplus stock.

Camera sold separately
Connectors:
• 3/4" (1.905 cm) Long, 5/8" (1.5875 cm) and 3/4" (1.905 cm) Wide Tiered

• 1.25" (3.175 cm) Long, 3/8" (0.9525 cm) Wide Notched

Cable Length: From 35" (88.9 cm) to 40" (101.6 cm) Long

This Dolan-Jenner / Fiber-Lite 180 High Intensity Fiber Optic Illuminator is used and in excellent condition. The Fiber Optic cables are not included.

Input Power: 120 VAC
This Variable Intensity Fiber Optic Illuminator is used and in excellent condition. The 21V, 150W Halogen Lamp is not included.

Interface Diameter: 20mm (0.7875 in)


Input Voltage: 120V 60Hz

This New Focus 8701 Picomotor Driver is used and in excellent condition. It ships as shown, with the power supply.

Input Voltage to AC Adapter: 120 VAC Only


For 220-240 VAC Operation, contact manufacturer for proper AC Adapter

This Schott / Fostec ACE Light Source with Iris is used and in good condition.

Model: 20520.2
Input Voltage: 120 V
Lamp*: Free Halogen Lamp Included (Non-Specific)

Connector Diameter: 0.75" (1.905 cm)

*If specific lamp is required, please contact manufacturer for pricing and availability.

This unit is also known as the Exfo 805-00009 8mm x 1000mm Liquid Fill OmniCure Light Guide.

Part Number: 805-00009
This New Focus 8701 Picomotor Driver is used and in excellent condition. The AC Adapter is not included.

Configuration:
• Resolution (HxV Pixels): 659x494
• Sensor: Sony ICX414

• Sensor Technology: Progressive Scan CCD
• Sensor Size (Optical): 1/2"
• Pixel Size (;micro;m): 9.9x9.9
• Frame Rate: 74

Part Number: 103905-14, 103906-14

Configuration:
• Mirror: Aluminum
• Cable Lead: 8 in (20.32 cm)

Part Number: LST4WBK2-A1-8, LST4WBK2-AL-8
Configuration:
• Gratings: 2 Installed

• Option: DKBS - Bi-Lateral Slits

View Photo of interior top view.
View Photo of interior side view, #1.
View Photo of interior side view, #2

Configuration:
• Aperture Size: 6mm
• Housing: #2 Housing
• Blade Finish: Teflon® Coated Stainless Steel Blades
Configuration:
• Scan Mode: Continuous
• Exposure Time: 16.27 msec

• Image Correction: Pixel-By-Pixel Offset and Gain
• Digital Output Format: 12 Bit Corrected
• Frame Rate: 30 Hz

Accessories:
• Universal Power Supply
• Camera to Power Supply Cable, Approximate Length: 72"
• Hard Shell Carrying Case

Input Voltage: 95-240VAC

This unit includes the top mount.

Configuration:
• Optical Size: ⅓ Inch Format

• Hyper HAD Resolution: 510 x 492
• Sensitivity: 1.0 lux at f1.2
• Signal System: NTSC Color System
• Power Requirements: 24V AC, 60 Hz

Optional sample Clamp is not included.

Includes:

• (1) Port Insert for Glass Sample Cup (P/N: A02-1010-316)

View Photo of Port Insert for Glass Sample Cup

Camera cable and power supply are not included.

Configuration:
• Picture Elements: 768 x 493

• Signal System: EIA Standards, NTSC Color System
• Scanning System: 525 Lines 2:1 Interface, 30 Frames/Sec.
• Video S/N Ratio: 48 dB or Over

Configuration:
• Main Discharge Capacitance: 0.33µF ±10%
• Input Voltage: 15 - 28 VDC
• DC Current: < 1.4-Amps @ 24V

• Power Discharged: 20 Watts Max

Part Number: 323942, 323905, 502-1130-7

This unit comes with a SX-5 adapter on one end, widening the end to 11/16" (1.746 cm), with a 1" (2.54 cm) base).

Configuration:

• Fiber Bundle Diameter: 0.125" (3.18 mm)
• End Ferrule Diameter: 0.187" (4.75 mm)
• End Ferrule Shoulder Diameter: 0.250" (6.35 mm)
• Bundle Sheathing Diameter: 0.230" (5.84 mm)
• Temperature Rating: -40° F to 225° F, (-40 C to 107 C)
• Total Overall Length: 72" (1828.8 mm)
• Sheathing Material: PVC Monocoil
• Light Source Adapter 1.0" (25mm) "A" Input: SX-5 Adapter
• Light Source Adapter 0.59" (15mm) "B" Input: SX-5B Adapter

Part Numbers: 002112005072

Dolan-Jenner Industries B and BX Cable Datasheet (pdf)

This unit has a large 16-pin camera connector. Lens and cables sold separately.

C-Mount Lens Connection


View Photo of this unit's rear connector

Cables and power supplies are not included.

XC-75 Configuration:
• Optical Size: ½ Inch Format

• Effective Picture Elements: 768(H) x 494(V)
• Total Number of Pixels: 811(H) x 508(V)
• Chip Size: 7.95mm(H) x 6.45mm(V)
• Unit Cell Size: 8.4µm(H) x 9.8µm(V)

This Displaytech DR95 FLC Driver is used and in excellent condition.

Input Voltage: 117/230VAC
This Hamamatsu R2658 Photomultiplier Tube is used and in excellent condition. The R2658 is a side-on photomultiplier tube; the side-on design offers much higher sensitivity in the red to near infrared region.
This Ocean Optics LS-1 Tungsten Halogen Light Source is used and in excellent condition. This unit includes an AC adapter, a spectral analysis, and Accessory FCBARREL, which is a 0.25 inch diameter barrel to accommodate optical fibers with FC terminations. This barrel replaces the standard SMA port on the LS-1 Tungsten Halogen Light Source.

View Photo of this unit's spectral analysis

AC Input Voltage to the AC Adapter: 120 VAC Only

This cable has the large 16-pin camera connectors. This cable works with the C2400, C2741, and others.
This JDSU / Westover FV-400 Video Fiber Microscope is used and in excellent condition. The FMA adapter AC adapter are not included.

This is the older style model, without the
ScratchView™ Button.

The Westover FV-400 is a modular video inspection microscope. Westover refers to these as "400x", but actual magnification can only be specified in conjunction with the video monitor's size.

Configuration:

• Video Fiber Microscope
• Bench-Top
• 400x
• NTSC

Configuration:
• Aperture Size: 45 mm
• Houseing: #2 Case
• Blade Finish: Teflon Coated

• Solid State Synchronization: Yes
Configuration:
• TV System: EIA
• DC Power Supply is not included

Part Number: TK5703A8
This Micro-Radian ThetaScan TL40 Small Target Laser Autocollimator with E2 Digital Controller is used and in excellent condition.

Includes:

• E2 Digital Controller

Included accessories are power cord, RS-232 serial cable, HunterLab Universal Software v3.60, and calibration files for this unit (on floppy). Not included are accessories and consumables such as sample cups, sample clamp, color reference standards, etc.

Our technician tested this instrument and copied (.jpg) a screenshot of the software showing some scans of colorful desktop items (floppy, post-it). Here is the screenshot.

This Roper Scientific MegaPlus 1.6i/10 BIT CCD Camera is used and in excellent condition. Power adapter, lens, and connection cables are sold separately.

Configuration:

• Camera Output: Digital Video
• Pixel Clock Rate: 10 MHz
• Exposure Settings: Mechanical shutter: 20 to 100,000 ms
• Lens Mount: C Mount
• Input Voltage: 12 to 28 VDC

This Hamamatsu C2741 Camera Controller is used and in excellent condition. This unit has the older style front panel without digital displays for the Contrast Enhancement controls.

Includes:
• Shading Card
• Booster Card

View Photo of Shading and Booster Cards.

Input Voltage: 120 VAC Only

This Atago PAL-1 Pocket Refractometer is used and in excellent condition. This unit ships with a case.

Configuration:
• Ideal for fruit-based food and drink

• Measurement Range: Brix 0.0 - 53.0 % / Temperature 9.0 - 99.99°C
• Measurement Accuracy: Brix ±0.2% / Temperature ±1°C

This item comes as pictured, with the FlashLamp, Lite-Pac Trigger Module, and FlashPac in a bracket with connector.

Configuration:

• FlashPac: LS-1130-3 (0.47 µF discharge capacitance)
• FlashLamp: FX-1153 (3.0 mm Arc Length in Metal Can)
• Lite-Pac Trigger Module: FYD-1150 (0.5-Joules Max Discharge Energy)


Part Number: 502-1130-3, 714614, FX-1153

This item comes as pictured, with the FlashLamp, Lite-Pac Trigger Module, and FlashPac in a bracket with connector.

Configuration:

• FlashPac: LS-1130-3 (0.47 µF discharge capacitance)
• FlashLamp: FX-1163 (3.0 mm Arc Length in Metal Can with Internal Hemispherical Reflector)
• Lite-Pac Trigger Module: FYD-1150 (0.5-Joules Max Discharge Energy)


Part Number: 502-1130-3, 714614, FX-1163

This Hamamatsu R1527P Photomultiplier Tube for Photon Counting is used and in excellent condition.

This Hamamatsu H7422P-50 Photosensor Module is used and in excellent condition. This unit has the heatsink and fan attached. Power Supply not included.

Configuration:

• 380 nm to 890 nm Spectral Response
• 2 µA Maximum Output Signal Current
• GaAs Photocathode
• 12% QE at Peak Wavelength
• High Gain (P Type)

This Wild Heerbrugg MTR32 6VDC Power Supply is used and in excellent condition.

Dimensions: 7" W x 7" D x 4.5" H (18.48cm x 18.48cm x 11.88cm)
This Mikropack DH-2000 Deuterium-Tungsten Halogen Light Source is used and in excellent condition. This unit is missing the hinged cover for the SMA connector.
This Volpi Intralux 4000 Light Source is used and in excellent condition. This unit does not include the filter holder. Please contact manufacturer for pricing and availability. The unit has been priced accordingly.

Input Voltage: 115 VAC Only

Includes:
• USB Digital Microscope
• Stand
• M100 Lens
• M200 Lens
• x400 Lens
• M30N Lens
• Black Case

• v1.0 Software CD
This unit includes tile carrying case with black glass and white tiles for calibration, four colored tiles gray, light green, light blue, and pink, as well as five sample cup port plates in various diameters; 5.0 mm, 10.0 mm, 17.0 mm, 30.0 mm and 50.0 mm. This unit also includes a copy of HunterLab EasyMatchQC Software v9.1 and a USB software key.

Our technician tested this instrument and copied (.jpg) a screenshot of the software showing some scans of colorful desktop items (yellow, grey, blue and green tiles). Here is the screenshot.

Configuration:
• With Internal Discharge Capacitor
• Flashlamp: FX-1150 (1.5-mm arc length in metal can)
• Discharge Energy: 0.5-Joules max

• Discharge Power: 20-Watts max


Part Number: FYD-1150B, 323650, 201-1150-B, FX-1150

This unit comes with a camera mount, as photographed. The AC Power adapter and any cables are not included. Please contact manufacturer for pricing and availability.
This Solatell Sola-Scope 2000 Handheld Spectroradiometer Kit is used and in excellent condition.
This Newport / Oriel 68811 200-500W Xe/HgXe Arc Lamp Power Supply is used and in excellent condition.

Configuration:

• Power Supply: Fully Featured Xe Only

Input Voltage: 110V

This Renishaw HPNIR785 Laser Source is used and in excellent condition. Power Supply is not included.
This Newport TSX-1D Fast-Drive Dovetail Linear Stage is used and in excellent condition.

Configuration:

• Travel: 1 in (2.54 cm)
• Thread Type: 1/4-20

This Gentec-EO TPM-300CE Laser Power Meter is used and in excellent condition. This unit includes a Gentec-EO PS-310WB Laser Power Detector. Power Adapter not included.

The battery needs replacement.

Model: TPM-300CE

Output:

• Voltage: 0-45 VDC
• Current: 0-15 A
• Power: 40-300 W
Power supply, cabling, interface card and lenses are not included.

This unit includes the Mercury Lamp Socket 100W.

View Photo of Mercury Lamp Socket 100W.

Configuration:
• Spectral Response: 185 nm to 900 nm
• Window Material: UV Glass
This unit ships with standard accessories.

Accessories Include:
• 710C Shutter Interconnect Cable (10 ft.)
This is the older version of the Hitachi KP-M1AP Black and White CCD Camera.

Configuration:
• Signal System: CCIR

• Number of Effective Pixels: 752 (H) x 582 (V)
• Scanning Frequency: 15.625 kHz (H), 50 Hz (V)
• Horizontal/Vertical Resolution: 560/575 TV Lines

This unit includes a strobe cable (approximately length: 40 in. [101.6 cm]).

Configuration:
• Camera Output: Digital Video
• Pixel Clock Rate: 10 MHz

• Exposure Settings: Mechanical shutter: 20 to 100,000 ms
• Lens Mount: C Mount
• Input Voltage: 12 to 28 VDC

This Stocker & Yale Lite Mite 9 Series Circular Fluorescent Microscope Illuminator is used and in excellent condition.

Configuration:
• Lamp: White
• Inside Diameter: 2 1/16 in (5.23 cm)
• Rubber Ring: Installed

Input Voltage: 120 V

This Hamamatsu C6979-11 Constant Current Power Supply is new from surplus stock. This unit ships in the manufacturer's packaging with standard documentation and accessories.
This Kontron / Thales TH 8730 CB 020 B-A PCI Module is used and in excellent condition. This is an optional board for the TH 8730 CCD camera. CCD camera and software are not included.

Part Number: 555 4782-G5471
This unit is also known as the Spellman PTV34.9P143X2532 HVPS Power Supply Assembly part number X2532.

Part Numbers: 10-000310-02, VDC310-02
Configuration:
• Channel: Single
• Communications: RS-232

Input Voltage: 110V
This controller has Timing I/O and Digitial Out rear panel interfaces.

C4742-95-12NRB Configuration:

• 1.3MB Digital
• 12 Bit
• 8X8 Binning

Includes:
• (1) 9-Pin Female D-Sub to 9-Pin Female D-Sub Cable, Approximate Length: 15 ft.
• (1) 44-Pin Male D-Sub to 68-Pin Female VHDCI Cable, Approximate Length: 17 ft.
• (1) 50-Pin Male D-Sub to 50-Pin Male D-Sub Cable, Approximate Length: 16.5 ft.

Input Voltage: 117 VAC

This Hamamatsu C5332-07 Beam Finder III Infrared Camera Head is used and in excellent condition. Controller not included.

Configuration:
• Wavelength: 1530 nm to 1560 nm
• Connector: 8-Pin

Configuration:
• Aperture Size: 6mm
• Housing: #2 Housing
• Blade Finish: AlMgF2 Coated BeCu Blades
Configuration:
• Sensor Size: 1/3 in.
• Resolution: 640 x 480
• Pixel Size: 7.4 x 7.4 µm

• Fps (Full Frame): 64
• Mount: C-Mount

Part Number: CR-GEN3-C6400

This Ludl Electronic Products 310493 Filament Lamp Power Supply is used and in excellent condition. This unit bears some minor cosmetic blemishes due to storage; please see the photo below.

View Photo of this unit from the front right.

This unit was manufactured for Carl Zeiss by Ludl Electronic Products.

Camera controller, power supply and cables are sold separately.

Configuration:
• 12V DC

• 0.66A

Part Number: 3-633-547-01, 3-633-547-02


This Beckman Coulter 514366 Prealigned UV Lamp Assembly is used and in excellent condition.

Showing 1-100 of 943 Results
Contact Us
Fax:

(240) 376-1381