Items/Page
Showing 1-100 of 760 Results
This Scott / Bacharach Series 4600 Gas PLUS Universal Toxic Gas Transmitter is used, and in excellent condition.

Sensor housing Part Number: 096-2170

Sensor End Cap Part Number: 096-2105

Sensors are not included. Please contact manufacturer for pricing and availability.

Rock Solid:
Scott / Bacharach ROCK SOLID® sensors use proprietary technology that significantly enhances sensor performance. ROCK SOLID® sensors can detect gas concentrations lower than any other electrochemical gas sensor. Rock Solid sensor holder: part number 096-2273

This Clack Resilite R70-35 Water Conductivity Monitor is new from surplus stock. This monitor has 1 MΩ resistance, and includes a control module.

AC Adaptor Input Voltage: 120 VAC
Size: 0.5 Inch

Part Number: R7035-1MEG

This unit does not include the transducer modules and has been priced accordingly.

Included:
• Universal Sensor Adapter

• (2) Ultrasonic Couplant Gel Tubes
• Fluxus Software
• Assorted Cables

View Photo of Universal Sensor Adapter.
View Photo of Inside of Universal Sensor Adapter.
View Photo of Ultrasonic Couplant Gel Tubes.
View Photo of Flexus Software Disk.
View Photo of Assorted Cables.

This Malema M-64-B44-000-001 Non-Adjustable Flow Switch is new from surplus stock.

Part Number: M-64-B44-000-001

Configuration:

• Model: 64
• Material: Brass
• Port: 1/2 in.
• Switch: Two SPST Normally Open Switches
• Piston Type: 316SS/Epoxy
• Set at 0.25 gpm Water Decr.
• Lead Length: 24 in.
• 120 VAC

Configuration:
• Outputs 1: Relay
• Outputs 2: Relay
• Alarm: None
• Communication: None

• Additional Option: Linear Process Input & Self Tuning
• Configuration Type: Standard
• Input: J Thermocouple
• Input Sensor Range: 32-800°F
• Display Units: Degrees Fahrenheit
• Output 1: Slow Cycling
• Output 2: Fan Cooling
• Alarm Output: Off

Accessories:
• Probe Cable
• Portable System Sampler
• PM880 Battery Charger
Part Number: P63A1N1A1B1N
- P63: pH analyzer with 0-14 pH measuring range; in NEMA 4X enclosure with hardware for panel, surface or pipe mounting.

- A: For GLI 5-wire Differential Technique pH sensor or combination pH electrode with preamp
- 1N: Reserved
- 1A: Single-fused (for single phase line power)
- 1: Electromechanical relays (two SPDT and one SPST)
- B1: PID Controller: Yes
- N: No EMI/RFI Enclosure

This Scott / Bacharach Series 4600 Gas PLUS Flow Cell is used, and in excellent condition. 90° nylon hose barbs.

Part Number: 096-2102
This item has some cosmetic damage; however, this will not prevent it from functioning properly. This is the control unit only and does not include an external flowmeter. Please Contact Siemens for pricing and availability of this accessory as well as others that may be necessary for your application.

Input Voltage: 90-250V

View Photo of Interior.
View a Representative Photo of the Cosmetic Damage.

Configuration:
• Maximum Output Power: 120 Watts
• Maximum Current: ±8.0 Amps

Input Voltage: 115/230 VAC
Accessories Included:
• SM1000-Probe
• SM1000-Cable, 1 m

• SM1000-Case

View Photo of accessories included.

Configuration:
• Option 3468: Eight Channel Input Option Card
Part Numbers: 330748-001, PAD895, RMS2196, 330749-001, 329358-001, FT2638
Model: 988A-22FD-MRRG
100-240V (AC or DC) Power
Vertical Mounting
Input #1 is Universal (configurable) Signal Input
Input #2 is Universal (configurable) Signal Input

Output #1 is Universal (configurable) Signal Output
Output #2 is a 5A Form C Relay
Output #3 is a Retransmit Output
Output #4 is a EIA/TIA-232 Communications Opto-Isolated Output
Display is Red and Green

The 5B39 Module features 1500 V rms common mode voltage isolation protection..

Configuration:

• Input Range: 0 V to +5 V
• Output Range: 4 mA to 20 mA

Sensor Modules, Communication Modules and paper rolls are Sold Separately.

Input Voltage: 120 VAC Only

Form Number: 0848290-122, 0848290-022
Sensor Modules, Communication Modules and paper rolls are Sold Separately.

Input Voltage: 120 VAC Only

Form Number: 0848290-022
The AC Power Supply is not included.

Configuration:

• Carrying Case

View Photo of All Included Items.

Part Number: 9693500

It includes the Operator's Manual, Installation / Mounting Instructions, and the custom test fixture that was originally paired with this system. The test fixture is included so that its construction can be observed if a new fixture is to be made 'in-house'. TM Electronics manufactured the fixture that is currently paired with this instrument for testing a laser diode package manufactured by a telecom company. The test fixture is the black object next to the instrument in the pictures (attached to the MDT-500C test port with tubing).

Upon boot-up the LCD screen displays:
T.M. Electronics
MDT-500-V2A
Leak Testers
5.00 PSIG / 0.02 InH20

Labeled on the back of the unit is Model # MDT-500C-005.

This unit includes the Sensor Bracket, Upper and Base.

Configuration:

• Supported Pipe Diameter: 1/2 in (15 A), Ø18 to Ø23 (mm) / 3/4" (20 A), Ø23 to Ø28 (mm)
• Supported Pipe Materials: Metal Pipe / Resin Pipe
• Supported Fluids: Various Liquids [i.e. Water (including DI), Oils, Chemicals)
• Supported Fluid Temperature: 0 to 85°C (32 to 185°F) (No Freezing on the Pipe Surface)
• Maximum Rated Flow: 1/2 in (15 A): 60L/min, 15.9G/min / 3/4" (20 A): 100L/min, 26.4 G/min

View Photo of Upper and Base Sensor Bracket.

The 5B47 Conditioner features isolated thermocouple input, an isolated and protected precision output of 0 to +5V and module circuitry that can withstand 240 Vrms at the input screw terminals.
This unit is a lightly used demo unit.

This transmitter includes the X7M7-A630-004 Twin Cable GWR Probe for Liquid Levels.

705-510A-320:
• 705- ECLIPSE Guided Wave Radar Level Transmitter
• 5- Power: 24 VDC, Two-Wire
• 10- Signal Output and Electronics: 4-20 mA with HART - SIL 1 Standard Electronics (SFF of 85.4%)
• A- Accessories: Digital Display and Keypad
• 3- Mounting / Classification: Integral, Explosion Proof (FM & CSA) & Non-Incendive
• 2- Housing: 316 Stainless Steel, Dual Compartment, 45° Angle
• 0- Conduit Connection: ¾" NPT

X7M7-A630-004:
• 7M7-A: Twin Cable GWR Probe in FEP Coated 316 Stainless Steel For Liquid Level ("M" for Metric)
• 63- ANSI Flanged: 4" 150 lbs. ANSI RF Flange
• 0- Process Seal - O-Ring Material: Viton GFLT Seal - for Universal Use / Steam Applications -40 °C (-40 °F) / +200 °C (+400 °F)
• 004- Insertion Length: Min 4ft. (1.2m)


The Lake Shore Cryotronics 332S Temperature Controller is used and in excellent condition.

Configuration:

• (2) Diode/Resistor Inputs

Input Voltage: 100/120/220/240V

AC charge and additional accessories are not included. Please contact manufacturer for pricing and availability.

Rechargeable battery is used.
This Schneider Electric / Eurotherm / Chessell 2416 Temperature and Process Controller is new from surplus stock.

Configuration:

• Function: 1 x 8 Seg. Prog.
• Supply Voltage: 85-264 VAC
• Module One: Fitted, Unconfigured
• Module Two: Fitted, Unconfigured
• Module Three: None
• Communications: None

Options:
• Control Action: Reverse Acting (Standard)
• Power Feedback: Enabled on Logic, Relay, and Triac Heating Outputs
• Cooling Options: Linear Cooling
• Front Panel Buttons: Enabled
• Programmer Timing: Ramp and Dwell in Minutes

Part Number: 2416/CG/VH/D2/R2/XX/XX/ENG/XXXXX/XXXXXX/////XX/XX/XX/XX/XX

This Lumasense / Luxtron FOT Lab Kit is new from surplus stock. This unit includes a power supply and RS-232 cable. The Fluoroptic Probe is not included; contact manufacturer for pricing and availability.

Part Number: 06-13745-01

1055-01-10-20 Configuration:
• Single Measurement
• Power: 115/230 VAC, 50/60 Hz
• Mounting: Panel Mounting Enclosure

• Measurement: Contacting Conductivity (0 to 20,000 uS/cm)
This Agilent / Varian HeliTest Portable Helium Leak Detector is used and in excellent condition. The battery pack is used. The AC power supply is not included. Please contact Manufacturer for pricing and availability.

Configuration:
• Carrying Case
• Helitest Battery: Model 9693530

Helitest Model Number: 9693500

This Agilent / Varian HeliTest Portable Helium Leak Detector is used and in excellent condition. The battery is used and of unknown remaining life.

Configuration:

• AC Power Supply with Lemo Connector
• Sniffer Wand
• Lemo to Lemo Extension Cable
• Lemo to Car Charger Cable
• Carrying Case
• 2 Helitest Battery: Model 9693530

View Photo of Battery.
View Photo of other accessories.

Helitest Model Number: 9693500

Configuration:
• Full Scale Range: 200 sccm
• Fittings: Swagelok 4-VCR Male
• Valve: Normally Closed

• Connector: 15-pin Type D
• Seals: Viton


Rechargeable battery is used.

Included Accessories:
• EESIFLO Carrying Case

• P5L7 Transducer Cable Approximately 10 M
• Output Cable Approximately 1.5 M
• PSA15W-120 Power Supply Cable
• Panasonic 18650CF Rechargeable Battery

Input Voltage: 100-240V

View Photo of included accessories.

This Eurotherm 818S Temperature Controller / Programmer is new from surplus stock. This unit is sealed in the manufacturer's box.

Configuration:
• Basic Product: Basic Controller
• Input 1: Thermocouple
• Output 1: Reverse Acting Control, Isolated 4-20mA
• Output 2: None
• Alarm 1: None
• Alarm 2: None
• Communications: Digital RS485
• Communications Function: Baud Rate 9600
• Options: Screw Terminal
• Curve: W5% Re/W 26% ReC, 0C to 2300C, 500C Min
• Display Minimum: 0
• Display Maximum: 1600
• Units: °C
• Digital Input 1: None
• Digital Input 2: None
• Software Option: Manual Key Enabled
• Software Option: Internal Compensation
• Software Option: Integral and Derivative in Secs
• Software Option: No Power Feedback

Part Number: 818S/TC/R4MA20/None/None/None/485/96/SN/24/0/1600/C/No/No/E/IN/S/N

1055-01-10-S1-DM Configuration:
• Dual Measurement
• Power: 115/230 VAC, 50/60 Hz

• Mounting: Panel Mounted Enclosure
• Field-Commissioned Suites: Suite 1 - Field Commissioned Measurement (Basic)

Part Number: 9241393-00/F

Configuration:
• Fully Ported ET-3 & R401 Hybrid
• Medium: Air, Water or Oil
• Airflow: Valve 9scfm at 100psig

• Mounting: Octoport Base and 2 captivated screws

Clippard R481 Datasheet (pdf)

This unit includes an FV100-C1 cable.

Configuration:
• Connection: ½ FNPT

• Min. Flow Range (GPM): 1.2
• Max. Flow Range (GPM): 12
• Pressure Drop psid Max.: 3.6
• Weight: 1.2 kg, 2.6 lbs


This unit does not have a probe attachment cable. This unit has the 850-3028 Monitor Input Cable, Female.

Part Number: 851-5918


Disclaimer: We are not a standard supplier of medical equipment and do not have the expertise to fully test or verify this equipment. It is the buyer's responsibility to qualify and professionally certify the fitness of the equipment. We are selling this equipment for non-clinical use and it should not be used in the treatment, research, or diagnosis of human patients or animals.

This is the control unit only and does not include an external flowmeter. Please Contact Siemens for pricing and availability of this accessory as well as others that may be necessary for your application.


This Beckman Coulter / Hach / Pacific Scientific PM-250 Vacuum Particle Controller is used and in excellent condition. This unit has the Filter Option Board "C" installed and is interlock enabled.

Input Voltage: 90-240V~

Part Number: 3000453

Configuration:
• Power Options: 100-240VAC, No Power Cord
• Communication Capabilities: 2x 4-20 mA Out
• Digital/Analog: Digital

• Sensor Input #1: Digital
• Sensor Input #2: Digital

Part Number: LXV404.99.00552

This ABB / Kent-Taylor 442R Pneumatic Indicating Controller is used and in excellent condition.

442R With Proportional and Reset:
The 442R has an adjustable proportional
response (gain is adjustable from 0.2 to 35% output per % input) and reset (integral – 0.05 to 200 repeats per minute). The proportional response adjusts the controller to provide an output that is proportional to any change of the process measurement. The reset rate is used to eliminate the offset between the set-point and the process. The instrument can operate in either direct or reverse action.

442RA1600G0100C:
• (442R) Base Number: Pneumatic Indicating Controller with Proportional Plus Integral Response
• (A) Measuring Element Actuation: Absolute Pressure
• (1) Set-Point Adjustment: Internal Set-Point Adjustment Knob
• (6) Automatic to Manual Unit: No Auto to Manual Unit Required
• (0) External Feedback: None
• (0) Alarms: None
• (G) Output Calibration and Control Action: 3 to 15 psi, Control Action is Reverse
• (0) Door Options: Glass Windows
• (1) Air Regulator and Air Supply Gauge (Piped and Mounted): Dual Scale Gauge, psi and Kg/cm²
• (0) Mounting Brackets: For Panel or Surface Mounting
• (0) Tagging and Certifications: No Tags or Certifications Required
• (C) Design Revision Level: C


This Watlow 93BB-1CA0-00RG Temperature Controller is new from surplus stock and ships in manufacturer's box.

Part Number: 93BB-1CA0-00RG
• 93: Series 93

• B: IP65/NEMA 4X Rating Option
• B: CE Compliance Option
• 1C: Output 1 as Non-Isolated, Switched DC
• A: Output 2; None
• 0: 100 to 240VAC Nominal Line Voltage
• 00RG: Red/Green Display

This Eurotherm Dimension 8705 Input / Output Processor is used and in excellent condition.

Model Number: 087733-001
Configuration:
• Program Variable Parameters

• Thresholds Set Separately: Low and High Flow Alarms

Input Voltage: 100-240 V

This Scott / Bacharach Series 4600-IR GasPLUS-IR Infra-Red Gas Transmitter is used and in excellent condition.

Configuration:
• Model: 4679-IR, CO2
This Gow-Mac Instrument 21-250 Gas Leak Detector is used and in excellent condition.

Configuration:

• Input Voltage: 115 VAC
This Malema M-64-B44-000-001 Non-Adjustable Flow Switch is used and in excellent condition.

Part Number: M-64-B44-000-001

Configuration:

• Model: 64
• Material: Brass
• Port: 1/2 in.
• Switch: Two SPST Normally Open Switches
• Piston Type: 316SS/Epoxy
• Set at 0.25 gpm Water Decr.
• 120 VAC

This Keithley / MetraByte MB31-02 Voltage Input SCM is used and in excellent condition.

• Isolated Voltage Input
This unit has a dent in the screen; however, this does not affect its ability to function properly.

Configuration:

• Option 3468: Eight Channel Input Option Card

Input Voltage: 100/120, 220/240 VAC

View Photo of dented screen.

This Tyco / ValleyLab LigaSure Vessel Sealing Generator is used and in excellent condition. No other accessories are included. We do not have the expertise to fully test this unit. It should only be used by a trained professional. Please see note about liability below.

Input Voltage: 110-120 V

Disclaimer:
Artisan Technology Group is not selling this item to be used on human and/or animal subjects. Artisan Technology Group and its employees are not liable for accidents or injuries that may occur with use or improper use of the LigaSure Sealing Generator. This instrument should be handled and used only by a person qualified and familiar with its use. If purchased, this disclaimer will need to be signed.

The 54eC Analyzer / Controller measures conductivity, resistivity, or percent concentration. The unit uses either contracting or inductive sensors to meet most application requirements. The 54eC has temperature correction algorithms for high purity water, cation conductivity, and linear temperature coefficient. This feature can be turned off if needed.

Includes:
• Mounting Kit
• Conduit Plugs

Input Voltage: 115/230 VAC

View Photo of this unit's label.

Part Numbers: 54EC-01, 9241415-00/D


This unit includes a cleaning kit and miscellaneous hardware.

Part Number: L9900000MT220

Configuration:

• MT: High Sensitivity
• 220: 220 VAC Input Voltage

Configuration:
• Standard Range
• No Communications

Part Number: 0681919-7A
This Scott / Bacharach Series 4600 Gas PLUS Flow Cell is used, and in excellent condition. Stainless steel compression fittings.

Part Number: 096-2102
Configuration:
• Power Options: 24 VDC
• Communication Capabilities: 2x 4-20 mA Out
• Digital/Analog: Analog

• Sensor Input #1: Analog Conductivitiy
• Sensor Input #2: Analog Conductivitiy

Part Number: LXV404.99.70222

This Emerson / Rosemount Analytical 1054BC-01 Conductivity Microprocessor Analyzer is used and in excellent condition. This unit is missing the rear shield.

Configuration:
• Measurement: Contacting Conductivity
• Display: LCD

Input Voltage: 115 / 230 VAC

This is a power supply for the 307 series vacuum gauge controllers.

Configuration:
• Line Voltage Range: 90-130 V

• Ion Gauge Ports: 2
• Type: Resistance Heating Degas

This unit includes the Meter Body, mounting kit, and (1) bolt.

8800DR040SA1N1D1K6M5R20:

• R- Meter Style: Reducer Style (Flanged Style Only)
• 040- Line Size: 4-in. (100 mm)
• S- Wetted Materials: 316 Wrought Stainless and CF-3M Cast Stainless
• A1- Alignment Ring Size: ASME B16.5 (ANSI) RF Class 150
• N- Sensor Process Temperature Range: Standard: -40 to 450°F (-40 to 232°C)
• 1- Conduit Entry: ½ -14 NPT - Aluminum Housing
• D- Outputs: 4-20 mA Digital Electronics (HART Protocol)
• 1- Calibration: Flow Calibration
• K6- Hazardous Locations Certifications: CSA Explosion-Proof; Intrinsically Safe; Division 2; Dust-Ignition-Proof
• M5- Display Type: LCD Indicator
• R20- Remote Electronics: Remote Electronics with 20 ft (6.1 m) Cable

View Photo of mounting kit and (1) bolt.

This Eurotherm 818P Temperature Controller / Programmer is used and in excellent condition.

818P Configuration:
• 1 Stored Program of 8 Ramps and 8 Dwells

• Auto/Manual Operation


This is the chassis, power supply and module interconnect boards. It ships as photoed. If you require a full system, please contact Artisan Sales for pricing and availability.

Input Voltage: 120 VAC Only
This unit does not have a probe attachment cable. This unit has the 850-3048 Monitor Input Cable, Male.

Part Number: 851-5918


Disclaimer: We are not a standard supplier of medical equipment and do not have the expertise to fully test or verify this equipment. It is the buyer's responsibility to qualify and professionally certify the fitness of the equipment. We are selling this equipment for non-clinical use and it should not be used in the treatment, research, or diagnosis of human patients or animals.

This Tyco / Valleylab Force FX Instant Response Electrosurgical Generator is used and in excellent condition.

Disclaimer:

Artisan Technology Group is not selling this item to be used on human and/or animal subjects. Artisan Technology Group and it's employees are not liable for accidents or injuries that may occur with use or improper use of the Force FX Electrosurgical Generator. This instrument should be handled and used only by a person qualified and familiar with its use. If purchased, this disclaimer will need to be signed.

This Eurotherm 818S Temperature Controller / Programmer is new from surplus stock.

Configuration:

• Basic Product: Basic Controller
• Input 1: Thermocouple
• Output 1: Reverse Acting Control, Isolated 4-20mA
• Output 2: None
• Alarm 1: None
• Alarm 2: None
• Communications: Digital RS485
• Communications Function: Baud Rate 9600
• Options: Screw Terminal
• Curve: W5% Re/W 26% ReC, 0C to 2300C, 500C Min
• Display Minimum: 0
• Display Maximum: 1600
• Units: °C
• Digital Input 1: None
• Digital Input 2: None
• Software Option: Manual Key Enabled
• Software Option: Internal Compensation
• Software Option: Integral and Derivative in Secs
• Software Option: No Power Feedback

Part Number: 818S/TC/R4MA20/None/None/None/485/96/SN/24/0/1600/C/No/No/E/IN/S/N

This Optek Control 4000 Photometric Converter is used and excellent condition.

Input Voltage: 115 / 230 VAC

The Newport / ILX Lightwave LDT-5948 60W Precision Temperature Controller is used and in excellent condition.

Configuration:

• Setpoint Accuracy, T Mode: ±0.005°C
• Output Current Range: -5.000 to 5.000A
• Maximum Output Power: 60W
• Current Limit, Range: -5 to 5A

This Exfo / Burleigh RC-45 CFT Controller is used and in excellent condition.
This unit includes the L8321301 UHV Board.

Input Voltage: 100/115/230 VAC
This unit includes (2) 316L SST Ground Rings.

8705THA040C3W0N0G1Q4DTCR:
• 8705- Magnetic Flowmeter SensoR

• T- Lining Material: PTFE
• H- Electrode Material: Nickel Alloy 276 (UNS N10276)
• A- Electrode Type: 2 Electrodes - Standard
• 040- Line Size: 4-in. (100 mm)
• C- Flange Material and Type: Carbon Steel Raised Face Slip-On
• 3- Flange Type and Rating: ASME B16.5 (ANSI) Class 300/MSS-SP44 Class 300 (30-in only)
• W0- Electrode Housing Configuration: Sealed, Welded Housing
• N0- Hazardous Area Approvals: FM Class 1 Div 2 for Non-Flammable fluids; CSA Class 1 Div 2
• G1- Optional Grounding Rings: (2) 316L SST Ground Rings
• DT- Other Option: Heavy Duty Tagging

View Photo of (2) 316L SST Ground Rings.

One of the screen covers has condensation on the inside of it; however, this does not affect the screen's ability to function. This unit is configured as a dual control unit.

Installed Modules:
• 307015 Electrometer Module
• 307013 Dual Convectron Gauge Module
• (2) 307017 Process Control Modules with 6 Setpoint Relays, 2 per Channel
• 307063 Convectron Module
• 307062 Convectron Module

View Photo of condensation on screen.

This Eurotherm Dimension 8725 PID Controller is used and in excellent condition. This unit includes the Analog I/O and the operator interface.

Model Number:
8725/AGOI/3211/CL1/PR1/232/422/0/0/0/

Configuration:

• AGIO: Attached Graphic Operator Interface
• 3211:
     • Output 1: 3
     • Output 2: 2
     • Output 3: 1
     • Output 4: 1
• CL1: 1 Control Loop
• PR1: 1 Programmer
• 232: EIA-232
• 422: EIA-422
• 0: No Comm 3
• 0: No Expansion Card 1
• 0: No Expansion Card 2

Installed Modules:
• CPU Processor Module
• ION Gauge Module
• CAP Module

• I/O Module

Part Number: 850-200-G1

Input Voltage: 110 / 220 V

This Fuji Electric PYZ4 Temperature Controller is used and in excellent condiiton.

Part Number: 1400, LFE-T0-4300-0000
This Applied Materials 0100-20007 Pneumatic Distribution Board is used and in excellent condition.

Part Number: 0100-20007
This is a demo unit that was installed but never put into commission.

Configuration:
•Measurement Channels: 3

•Display: LCD
•Display Range, mbar: 5x10-10...1500
•Display Range, Torr: 3.75x10-10...1125
•Setpoint Relays: 6

Input Voltage: 90-250V~

Part Number: 398-021

Configuration:
• Base Model Number: 3750C, 55 mm, Armored Purge Flowmeter
• Material Specification: 316L Stn. Stl.

• Meter Size: Size 2 - 316L Stn. Stl. Float
• Construction/Seals: Standard Design/Viton O-Rings
• Connection Size and Type: 1/4" NPT (F) - Integral
• Connection Orientation: Horizontal Inlet and Outlet (Threaded Connections Only)
• Valve Configuration: Low Flow Valve on Inlet - Typical for Sizes 0, 1, 2
• Accuracy/Inscription/Fluid: 4VDI/5%FS / Direct Reading / Gas

Configuration:
• Pressure: Absolute
• Range: 1000 Torr
• Fittings: Swagelok 4 VCR Male

• Valve: Normally Closed
• Seal Materials: Metal
• Valve Orifice Number: #3 (5000 sccm)
• Trip Points: Included

Part Number: 640A13TW1M32K-S

3051S2TG5A2E11A1AD1K6M5Q4Q8A1003:
• 3051S- Model: Scalable Pressure Transmitter

• 2- Performance Class: Classic: 0.035% Span Accuracy, 150:1 Rangedown
• T- Connection Type: In-Line
• G- Measurement Type: Gage
• 5A- Pressure Range:
  • Gage: -14.7 to 10000 psi (-1,01 to 689,47 Bar)
  • Absolute: 0 to 10000 psia (689,47 Bar)
• 2- Isolating Diaphragm: 316L SST
• E11- Process Connection: ½-14 NPT Female
• A- Transmitter Output: 4-20 mA with Digital Signal Based on HART Protocol
• 1A- Housing Style: PlantWeb Housing
  • Material: Aluminum
  • Conduit Entry Size: ½-14 NPT
• D1- Hardware Adjustments: Hardware Adjustments (Zero, Span, Alarm, Security)
• K6- Product Certifications: CSA Explosion-Proof, Dust Ignition-Proof, Intrinsically Safe, Division 2
• M5- Display Type: PlantWeb LCD Display

Housing Model Part Number: 300S1AAD1K6M5

This Agilent / Varian 956 Portatest II Mass Spectrometer Leak Detector L8020-301 Module is used and in excellent condition.

Part Number: D-L8021-301
This Emerson / Rosemount Analytical 1054A Microprocessor pH Analyzer is used and in excellent condition.

Configuration:
• Gas: N2
• FS Flow: 1000 SCCM
• Response: 1 sec.
• Seal: Viton, Metal

• Valve: NC
• Orifice: .062"
• Rest: None
• CF to N2: 1

Part Number: 1084303-1001

This Physitemp BAT-12 Microprobe Thermometer is used and in excellent condition. This unit comes with no stand.

The BAT-12 has improvements for all these applications:

• In the lab: Readings to 0.1°C; near perfect stability
• In the field: A superior cold junction reference, which maintains accuracy with ambient temperature changes from O°C to 50°C; sealed construction
• For recording: Analog output for strip chart recording is a standard feature

BAT-12 is the ideal instrument for use with microprobes. These 5 sensors are among the most popular and there are many more to choose from:
• Flexible Implantable Microprobe, IT-18
• Needle Microprobe, MT-26/2
• Surface Probe, BT-1
• General Purpose Probe, HT-1
• Sensor Six Pack, PT-6

Input Voltage: 90-240V

Part Numbers: 16380, 776071-X-017
This Varian 956 Portatest II Mass Spectrometer Leak Detector is used and in excellent condition. This unit is complete and functional however the cover for left side function keys is missing. The 2.2x10-7 internal calibrated helium leak will need to replaced. Contact Varian for pricing and availability.

This item includes:
• Varian 956 Portatest II Base Unit
• Varian SD300 Vacuum Pump with ¾ HP Franklin Electric Motor
• Edwards 8 Two Stage High Vacuum Pump with ½ HP Franklin Electric Motor
• Pictured Wheeled Cart

Sensitivity
• 2 x 10-10 atm cc/sec – He
• 8 x 10-11 atm cc/sec - Air

Voltage Input: 115VAC
Dimensions of 956 Portatest (L x H x D) - 16" x 17" x 16.25"
Dimensions with Cart (L x H x D) - 39" x 42.75" x 20.5"

View Photo of front panel with missing cover for left side function keys

This Watlow 804B-1600-0000 1/4 DIN Digital Temperature Controller is used and in excellent condition.

Configuration:

• Output: Triac, 1A, Resistive
• Control Mode: ON/OFF
• Input: Thermocouple
• Range: -99 to 999°F
• Faceplate: Gray with White Bars

Part Number: 804B-1600-0000

IDP10-T22C01F Configuration:
• Electronics Versions and Output Signal: Intelligent; Digital, HART and 4 to 20 mA (Version -T)

• Structure Code: Transmitter with Traditional Structure - Cover 316 ss, Sensor 316L ss, Fill Fluid Silicone
• Span Limits (Differential Pressure Units): kPa 7 and 210, inH2O 28 and 840, mbar 70 and 2100
• Process Connector Type (Material Same As Process Cover Material): No connectors; both covers tapped for 1/4 NPT (316 ss only, no side vents)
• Conduit Connection and Housing Material: 1/2 NPT Conduit Connection, Aluminum Housing
• Electrical Safety: FM Approved, Division 1 Intrinsically Safe, Explosion Proof, Dust-Ignition Proof; and Non-Incendive, Division 2, Classes I, II, and III. Zone approved intrinsically safe AEx ia IIC.

Part Number: NC52K0226B

Model Number: MIS1-121-111000-60S

This unit has three Channel Cards installed.

Installed cards:


Channel One:
Part Number: 9815-14 / 7681G
Hygrometry:
MHO: -.0084
LR: .1688
HR: 2.9552
Pressure:
High: +100.18
Low: -0.02

Channel Two:
Part Number: 9815-14 / 7681G
Hygrometry:
MHO: -.0086
LR: .1702
HR: 2.9475
Pressure:
High: +100.15
Low: -0.03

Channel Three:
Part Number: 9815-14 / 7681G
Hygrometry:
MHO: -.0085
LR: .1695
HR: 2.9530
Pressure:
High: +100.18
Low: -0.03

View Photo of the interior of this unit

The 54eC Analyzer / Controller measures conductivity, resistivity, or percent concentration. The unit uses either contracting or inductive sensors to meet most application requirements. The 54eC has temperature correction algorithms for high purity water, cation conductivity, and linear temperature coefficient. This feature can be turned off if needed.

View Photo of this unit's label.

Part Numbers: 54EC-01, 9241415-00/D


Model Number: MIS1-321-110000-420

This unit has two Channel Cards installed.

Installed Cards:


Channel One:

Part Number: 9815-14 / 7681E
Hygrometry:
MHO: -.0104
LR: .1682
HR: 2.9656
Pressure:
High: +99.96
Low: -0.03

Channel Two:
Part Number: 9815-14 / 7681C
Hygrometry:
MHO: -.0100
LR: .1681
HR: 2.9662
Pressure:
High: +99.82
Low: -0.03

View Photo of of the interior of this unit
View Photo of of the back of this unit, with terminal blocks

1055-01-10-26 Configuration:
• Single Measurement
• Power: 115/230 VAC, 50/60 Hz

• Mounting: Panel Mounting Enclosure
• Measurement: Ozone

Configuration:
• Model: Turbidity Analyzer in 1/2 DIN, NEMA 4X Enclosure with Hardware for Panel, Surface or Pipe Mounting

• Communications Output: None
• Line Frequency: For Use with 60 Hz Line Power
• Equipment Tagging: None

This Sartorius / B. Braun Sartoflow Alpha Benchtop Crossflow System is used and in excellent condition.

Configuration:

• Voltage: 230 VAC

Includes:

• Krohne Altometer
• Sartorius 2 Liter Tank
• (3) Wika Transmitters, Part Number: 7934824
• 3.5 in. Floppy Disk Drive

Siemens IEC Squirrel-Cage Compressor Motor:

• EN 60034
• 1LA7083-4AA10-Z
• NoUD 0030069-0010-0003
• ThCl F 80
• IP: 55
• IM: B3

Jabsco 55 Series Pump:

• Model Number: 55320-1200
• Port Size: 0.75 in (19 mm)
• Displacement (100 revs): 0.77 US gal (2.9 liters)
• Max Flow (per min): 11.6 US gal (44 liters)
• Max Pressure: 290 psi (20 bar)
• Max Speed: 1500 RPM
• Temp: −22 to 284 °F (−30 to 140 °C)
• Viscosity: 1 to 1 million cP

View Photo of this unit's monitor and floppy disk drive

This Schneider Electric / Invensys / Foxboro IMT96-SEADB10L-B MagEXPERT Flow Transmitter is new from surplus stock.

IMT96-SEADB10L-B Configuration:

• Transmitter Mounting: Surface, Wall, or Panel Mounting
• Language: English
• Nominal Supply Voltage and Frequency: 120 VAC, 47 to 63 Hz
• Communication Protocol: Digital FoxCom and/or 4 to 20 mA, Configurable
• Integral LCD Indicator/Keypad: LCD Indicator with Wide Angle Display and Keypad
• Transmission Signal Output: Internally Powered, 4 to 20 mA and Superimposed Digital Signal; 600 Baud FoxCom
• Pulse Output Signal: OFF
• Electrical Safety Classification: CSA, Class I, Division 2; Class II, Division 2; Class III, Division 2
• Optional Selections: LCD Indicator/Keypad Protective Cover

This Edwards D386-55-000 Active Gauge Controller is used and in excellent condition.

Configuration:

• Single Line Display
• 3 Head Interface

The 5B32 Module features isolated current input, output of 0 to +5V and module circuitry that can withstand 240 Vrms at the input screw terminals.

Configuration:
• Input Range: 4 mA to 20 mA

Symphony-Solo Configuration:
• Data Conversion Speed: 20 kHz Only

• Memory: 16 MB SDRAM DIMM

CCD-1024x256-OPEN-STE Configuration:
• Operating Temperature: -70°C (203 K) or Better
• Optical Distance: 0.256 in (6.50 mm)

Includes:
• 10/100 Ethernet Network Interface Card-Desktop, Part Number: 973078
• TE Cooler/Shutter Cable,Part Number: 400424, Approximate Length: 6 ft..
• Detector Video Cable, Part Number: 980058, Approximate Length: 6 ft..
• Ethernet Crossover Cable, Part Number: 980047, Approximate Length: 6 ft.

Input Voltage: ~85-250VAC

Showing 1-100 of 760 Results
Contact Us
Fax:

(240) 376-1381