Items/Page
Showing 1-100 of 1365 Results
This cable connects to a DAQCard-700 or DAQCard-1200.

Part Number: 182799-01, 182799B-01


National Instruments PR50-50F Datasheet (pdf)

Configuration:
• Cable Length: 0.5 m (1.6 ft)
• Connector: Miniature ClickLoc Coaxial

• Agency Approval: Not Required


Part Numbers: 182762A-01, 182762B-01, 182762C-01, 182762D-01
The SHC68-68-EPM is specially designed to work with NI X Series and M Series data acquisition (DAQ) devices. The cable includes separate digital and analog sections, individually shielded twisted pairs for analog inputs, individually shielded analog outputs, and twisted pairs for critical digital I/O. It features a 68-position 0.050 series D-Type connector to 68-position VHDCI connector.

Part Numbers: 192061-02, 192061A-02, 192061B-02, 192061C-02

National Instruments Accessory and Cable Selection Guide (pdf)


Configuration:
• Cable Length: 0.5 m (1.6 ft)
• Connector: Miniature ClickLoc Coaxial

• Agency Approval: Multiple Approvals


Configuration:
• Cable Length: 0.5 m (1.6 ft)
• Connector: Miniature ClickLoc Coaxial

• Agency Approval: Multiple Approvals


Configuration:
• Cable Length: 1 m (3.3 feet)
• Connector: Miniature ClickLoc Coaxial

• Agency Approval: Multiple Approvals


This Yaskawa DP9320081-3 10m Power Cable is new from surplus stock.
Type: NB7, 26-Pin to 26-Pin Ribbon

Part Number: 180924-04
Configuration:
• Cable Length: 8 m (26.2 ft.)
• Connector Protector and Cable Option: Standard Cable

• Agency Approval Option: None
The SHC68-68-EPM is specially designed to work with NI S Series and M Series data acquisition (DAQ) devices. The cable includes separate digital and analog sections, individually shielded twisted pairs for analog inputs, individually shielded analog outputs, and twisted pairs for critical digital I/O. It features a 68-position 0.050 series D-Type connector to 68-position VHDCI connector.

Part Numbers: 192061-02, 192061A-02, 192061B-02, 192061C-02

National Instruments Accessory and Cable Selection Guide (pdf)


Configuration:
• Approximate Length: 2 ft.

Part Numbers: 119932-U, E119932-U, E203257
Part Number: 184749-02, 199006-02, 199006A-02, 199006B-02, SH68F-68F-EPM

The SH68-68-EPM cable is a newer design to the SH68-68-EP, featuring additional shielding and specific cable pairings to improve noise performance.

Configuration:
• Cable Length: 4.5 metres (14.8 feet)
• Connector Protector and Cable Option: Standard Cable

• Agency Approval Option: Not Required


This unit is sealed in the original manufacturer's bag.

Part Number: 193355A-03, 779500-03
NI has renamed the SH100-100-F to the SH100M-100M Flex Cable.

Part Numbers: 185095-02, 185095C-02, 185095D-02, 777649-02, SH100M-100M


National Instruments SH100-100-F Datasheet (pdf)

Configuration:
• Cable Length: 4.5 metres (14.8 feet)
• Connector Protector and Cable Option: Standard Cable

• Agency Approval Option: Not Required


This unit is used to connect 100-pin E Series devices and terminates with two female 68-pin 0.050 series D-type connectors.

Part Number: 182849A-01
This is also known as Meritec, Part Number: 941128-002.

This cable is marked as Type MXI2-1 and 2 Meters M.

Part Number: 182801A-002


The cable ends are straight to straight.

This is also known as the R68F-68F.

Length: 0.25 Meters

Part Number: 187252A-0R25
This cable is also labeled: Amp Incorporated E57891 Type CL2, Part Number: 1324640-4.

Part Number: 763431-02


Amp Cable Datasheet (pdf)

Configuration:
• Unthreaded Length: 0.0 in
• Overall Case Length: 2.4 in
• Total Length: 0.5 m (1.6 ft)

• Connector and Cable-Type: Miniature Coaxial ClickLoc Connector, Standard Cable
• Agency Approval: Multiple Approvals


This Excalibur Systems ESI-125-1-176-039 MIL-STD-1553 In-Line Coupler Cable (1 Meter/Each Wire) is used and in excellent condition.

Configuration:
• Manufacturer's Designation: ESI
• Number of Stubs: 1
• Internal Configuration: One Termination Resistor
• External Configuration, Boot: Without Mounting Tab
• Options: Standard M17/176-00002
• Cable Length (Each Wire): 39 in. (1 m)

Part Number: ESI-125-1-176-039
Product Family: 5985-01-548-8844, 5985015488844

Configuration:
• Cable Length: 4.5 Meters (14.8 Feet)
• Connector Protector and Cable Option: Standard Cable

• Agency Approval Option: Multiple Approvals
Part Number: 184749A-02, 184749C-02, 184749B-02

These cables can have either latch or thumb screw connectors. If a specific connector is required, please contact Artisan Technology Group Sales for availability.

National Instruments SH68-68-EP Datasheet (pdf)
National Instruments Accessory and Cable Selection Guide (pdf)


Configuration:
• Approximate Length: 7-10 Meters (22.9-32.8 feet)*

Part Number: 136794, 141886

View Photo of 15-pin connector.

*If a specific cable length required, please contact Artisan Technology Group Sales. Available lengths are 7, 8 and 10 meter cables.

The SHC68-68-EPM is specially designed to work with NI X Series and M Series data acquisition (DAQ) devices. The cable includes separate digital and analog sections, individually shielded twisted pairs for analog inputs, individually shielded analog outputs, and twisted pairs for critical digital I/O. It features a 68-position 0.050 series D-Type connector to 68-position VHDCI connector.

Part Numbers: 192061-01, 192061A-01, 192061B-01, 192061C-01, 192061C-0R5

National Instruments Accessory and Cable Selection Guide (pdf)


This National Instruments SCXI-1180 Feedthrough Panel is used and in excellent condition.

Part Number(s): 185904A-01, 181680E-01
This unit connects National Instrument Controllers to MID-76xx motor drives, SSR cable adapter, MCA-7724, or UMI-7774/2. It features a 68-pin VHDCI offset male connector on both ends.

Part Numbers: 186380C-02, 186380D-02

National Instruments Counter/Timer Accessories and Cables (pdf)

This cable is also known as the SH68F-68F Digital Cable.

Part Numbers: 183432B-01, 183432-01, 183432C-01, SH68F-68F
This Agilent / HP 70800B MSIB Cable is used and in excellent condition. The 70800B is a 1 meter long MSIB cable that goes with the Agilent / HP 70000 Series.

Part Number: 70800-60003


Lead Time: Depends on desired quantity. Please contact Artisan Sales for more accurate lead time.

Fit and finish of cable might not be the same as this stock items photo.

Configuration:
• Cable Length: 4.0 metres (13.1 feet)
• Connector Protector and Cable Option: Standard Cable

• Agency Approval Option: Not Required


This cable connects to a DAQCard-700 or DAQCard-1200.

Part Number: 182799-0R5


National Instruments PR50-50F Datasheet (pdf)

Part Number: 182802A-002
Catalog Number: 777164-02

The cable ends are straight to right-angle daisy-chain.
Part Number: 184749A-01, 184749B-01, 184749C-01, 184749D-01, 184749-01

These cables can have either latch or thumb screw connectors. If a specific connector is required, please contact Artisan Technology Group Sales for availability.

National Instruments SH68-68-EP Datasheet (pdf)

This Yaskawa DP9320089-03 10M Incremental Encoder Cable is new from surplus stock.
This unit connects National Instrument Controllers to MID-76xx motor drives, SSR cable adapter, MCA-7724, or UMI-7774/2. It features a 68-pin VHDCI offset male connector on both ends.

Part Number: 186380-02, 186380C-02, 186380D-02

National Instruments Counter/Timer Accessories and Cables (pdf)

Configuration:
• Cable Length: 2 m (6.56 ft)

Part Number: 158394-3
This cable connects the DAQCard-6533 to custom cables or other 68-pin cables.

Length: 3.75 in. (0.1 m)


National Instruments PSHR68-68M Datasheet (pdf)

Part Numbers: 183569C-01, 183569B-01, 183569A-01, 183569-01

Configuration:

• 0.5 Meters
• Three 96-Pin Connectors

• 64-Conductor Connections

Part Number: 360-010004-007D

This NI PCMCIA-FBUS/2 Shielded Cable is used, and in excellent condition.

Part Number: 183904A-01, 777282-02
The SHC68-68-EPM is specially designed to work with NI X Series and M Series data acquisition (DAQ) devices. The cable includes separate digital and analog sections, individually shielded twisted pairs for analog inputs, individually shielded analog outputs, and twisted pairs for critical digital I/O. It features a 68-position 0.050 series D-Type connector to 68-position VHDCI connector.

Part Numbers: 192061-01, 192061A-01, 192061B-01

National Instruments Accessory and Cable Selection Guide (pdf)


This OMRON V600-A45 3m ID RWH Cable is new from surplus stock. This unit ships in the original manufacturer's packaging.
Configuration:
• Cable Length 3.0 meters
• Wire Size AWG: 28
• Wire/Cable Type: Round

• Waterproof / Dustproof: Yes

Part Numbers: 195994A-03, 779725-03

Part Number: 199006B-02, 184749C-02, 199006A-02, SH68F-68F-EPM

The SH68-68-EPM cable is a newer design to the SH68-68-EP, featuring additional shielding and specific cable pairings to improve noise performance.

This unit has a chipped connector, which does not affect the operation. The 7011-MTC-2 is a 2m (6.6 ft) mass terminated cable assembly for connection to 7011-C and other switch cards. The cable has 45 pairs with outer shield. The cable is terminated at each end with 96-pin female DIN connectors with strain relief.

View Photo of the chipped connector.

Keithley 7011-MTC-2 Datasheet (pdf)
Keithley Cables Datasheet (pdf)

The 1553 connectors are Milestek 4Z977.

Configuration:

• Main Port Splits Into Bus A1, Bus A2, Bus B1, and Bus B2 Cables

Part Number: CA-2087, 4Z977

This unit is a shielded 68-conductor cable terminated with a 68-pin male VHDCI connector at one end and unterminated bare wires at the other.

Configuration:
Length: 2 Meters

Part Number: 189041-02, 189041B-02, 189041D-02

This cable is also known as the SH68F-68F Digital Cable.

Part Number: 183432A-02, 183432B-02, 183432-02, SH68F-68F
Product Family: 5995-01-508-8157, 5995015088157
The shielded cable is terminated with two 68-pin female 0.050 series D-type connectors. This cable connects NI 4350 and NI 4351 devices to 68-pin accessories.

Part Numbers: 182419-02, 182419B-02, 182419C-02

National Instruments SH6868 Datasheet (pdf)


The 68M-50F is a 68-pin male to 50-pin female converter.

View Photo of the 68-pin connector on this unit.

Part Number: 185630C-01

The 7011-MTC-2 is a 2m (6.6 ft) mass terminated cable assembly for connection to 7011-C and other switching cards. The cable has 45 pairs with outer shield. The cable is terminated at each end with 96-pin female DIN connectors with strain relief.

Keithley 7011-MTC-2 Datasheet (pdf)
Keithley Cables Datasheet (pdf)

Length: 15 Inches

Part Number: 185576B-15
Product Family: 6150-01-522-0432, 6150015220432
The SHC68-68-EPM is specially designed to work with NI X Series and M Series data acquisition (DAQ) devices. The cable includes separate digital and analog sections, individually shielded twisted pairs for analog inputs, individually shielded analog outputs, and twisted pairs for critical digital I/O. It features a 68-position 0.050 series D-Type connector to 68-position VHDCI connector.

Part Number: 192061B-0R5, 192061-0R5, 192061C-0R5

National Instruments Accessory and Cable Selection Guide (pdf)


This unit shows wear on the connector, which does not affect the operation. The 7011-MTC-2 is a 2m (6.6 ft) mass terminated cable assembly for connection to 7011-C and other switch cards. The cable has 45 pairs with outer shield. The cable is terminated at each end with 96-pin female DIN connectors with strain relief.

View Photo of an example of wear on the connector.

Keithley 7011-MTC-2 Datasheet (pdf)
Keithley Cables Datasheet (pdf)

Configuration:
• Cable Length: 8.5 m (27.9 ft.)
• Connector Protector and Cable Option: Standard Cable

• Agency Approval Option: None
This Agilent / HP A2636-61602 AUI Adapter Cable is used and in excellent condition. This cable is a mini 15-pin connector to standard 15-pin connector (AUI) cable.
This Siemens 6ES7 901-3CB30-0XA0 RS232 / PPI Multi-Master Cable is used and in excellent condition.

Part Number: 6ES7 901-3CB30-0XA0
The 68M-50F is a 68-pin male to 50-pin female converter. The SH68-68-S is a 2-meter 68-pin female to 68-pin female cable.

Length: 2 Meters

68M-50F Part Number: 185630D-01


SH68-68-S Part Number: 185262B-02

National Instruments 68M-50F Manual (pdf)

Configuration:
• Cable Length: 8.5 meters (27.9 feet)
• Connector Protector and Cable: Standard Cable

• Agency Approval: Multiple Approvals
The SVME-179 has a single 31-pin connector on the front panel that provides access to two EIA-232 serial channels (1 and 2), an Ethernet 10BaseT or 100BaseT interface, plus a COP/JTAG interface for debugging purposes. The front panel cable routes the different interfaces to separate connectors. Default serial communication parameters are 9600 N, 8, 1 (9600 baud, no parity, 8 bits, 1 stop bit). Cable length is approximately 69 inches (175 cm).
Showing 1-100 of 1365 Results
Contact Us
Fax:

(240) 376-1381