Items/Page
Showing 1-100 of 241 Results
This has the newer-style Agilent terminal block interface with the QUIC rails. There are no SCP modules installed. Please browse our inventory here: (Item #52336) for available SCP modules.

The Terminal Block is not included.

This Danaher Motion / Motion Engineering DSPpro-VME Board Level Controller is used and in excellent condition. This unit is missing the faceplate, however this does not affect its functionality.

Configuration:

• Intel 386EX, 25 MHz Microprocessor, MS-DOS 6.22
• 387 Math Co-Processor
• Analog Devices 40 MHz DSP

Part Number: 1007-0021

The Pentek 4283 Floating Point DSP MIX Module for VMEbus is based on the Texas Instruments TMS320C30 Floating Point Digital Signal Processor. It features the 32 MFlop TMS320C30 DSP chip, up to 8 MB of dual-ported DRAM, 256 KB of high-speed SRAM, and 128 KB of EPROM. Since the Model 4283 may function as a VMEbus master and/or system controller, the TMS320C30 may access VMEbus resources simply by reading or writing to certain portions of its memory map. When installed in Slot 1, the Model 4283 can drive the system clock and reset signals and function as the bus arbiter.

Configuration:
•Option 002, 4 MB Dual-Port DRAM

Part Number: 332017, 309039
Daughtercard Part Number: 363005, 217042

This Curtiss-Wright / DY4 CHAMP-AV II / SVME-412 Quad PowerPC DSP is used and in excellent condition.

Configuration:
• 1 GB SDRAM

• (4) 500 MHz Processors

Part Number: SVME-412-0012, 901777-011


This National Instruments PCI-6810 Serial Data Analyzer is used and in excellent condition.

Part Numbers: 184533B-01, 184533C-01
This Agilent / HP E1433B 8-Channel 196 kSa/s Digitizer Plus DSP is used and in excellent condition.

Installed Options: None (standard configuration)
Opt 1D4: Additional Arbitrary Source installed
Opt 1DL: One Input Assembly (4-Channels)
This National Instruments PCI-4451 2-Channel Dynamic Signal Acquisition Board is new from surplus stock.

The National Instruments PCI-4451 is a high-accuracy, dynamic signal acquisition PCI plug-in board for making high-performance measurements. The NI PCI-4451 simultaneously digitizes input signals on four analog differential inputs over a bandwidth from DC to 95 kHz at sample rates up to 204.8 kS/s.

Part Number: 185014F-01, 777534-01

Opt AYD: A sample rate control clock of 10.24 MHz instead of the standard 10MHz clock. The 10.24MHz clock is used in applications where the sample rate is desired to be an exact power of 2.
The Pentek 4283 Floating Point DSP MIX Module for VMEbus is based on the Texas Instruments TMS320C30 Floating Point Digital Signal Processor. It features the 32 MFlop TMS320C30 DSP chip, up to 8MBytes of dual-ported DRAM, 256 KB of high-speed SRAM, and 128 KB of EPROM. Since the Model 4283 may function as a VMEbus master and/or system controller, the TMS320C30 may access VMEbus resources simply by reading or writing to certain portions of its memory map. When installed in Slot 1, the Model 4283 can drive the system clock and reset signals and function as the bus arbiter.

Part Number: 332017
Daughtercard Part Number: 468009 (1 MB Dual-Port DRAM)

Part Number: 72-4P1-221-B000

Configuration:

• DSP Module
• 50 MHz Processor

• 4 CPUs Installed
• 2 MB Local Memory
• 1 MB Global Memory

Daughtercard Part Number: 7870-2S1P-3

Daughtercard Configuration:

• 2 MB Near Global Memory

Configuration:
• Processor: 160 MHz TMS320C6701GJC DSP
• Memory: 16 MB DRAM
• Memory: 512 KB SRAM

• Omnibus Daughtercards are Sold Separately
Configuration:
• Memory: 1 MB On-Board SRAM

Part Numbers: 181475-13, 181475E-13
This module does not have the MIX connector attached to it.

The Pentek 4283 Floating Point DSP MIX Module for VMEbus is based on the Texas Instruments TMS320C30 Floating Point Digital
Signal Processor. It features the 32 MFlop TMS320C30 DSP chip, up to 8 MB of dual-ported DRAM, 256 KB of high-speed SRAM, and 128 KB of EPROM. Since the Model 4283 may function as a VMEbus master and/or system controller, the TMS320C30 may access VMEbus resources simply by reading or writing to certain portions of its memory map. When installed in Slot 1, the Model 4283 can drive the system clock and reset signals and function as the bus arbiter.

Configuration:
•Option 002, 4 MB Dual-Port DRAM

Part Number: 332017
Daughtercard Part Number: 386026

This National Instruments PCI-4451 2-Channel Dynamic Signal Acquisition Board is used and in excellent condition.

The National Instruments PCI-4451 is a high-accuracy, dynamic signal acquisition PCI plug-in board for making high-performance measurements. The NI PCI-4451 simultaneously digitizes input signals on four analog differential inputs over a bandwidth from DC to 95 kHz at sample rates up to 204.8 kS/s.

Part Number: 185014-01, 185014G-01, 185014F-01, 777534-01

This National Instruments PCI-6810 Serial Data Analyzer is new from surplus stock. It ships in the original NI static bag.

Part Number: 184533B-01
Configuration:
• "Marking on the Fly" Option

This National Instruments PCI-4454 4-Channel Dynamic Signal Acquisition Board is new from surplus stock. This unit ships in the manufacture's sealed bag.

The National Instruments PCI-4454 is a high-accuracy, dynamic signal acquisition PCI plug-in board for making high-performance measurements. The NI PCI-4454 simultaneously digitizes input signals on four analog single-ended inputs over a bandwidth from DC to 23 kHz at sample rates up to 51.2 kS/s.

Part Number: 186597A-01

This Kollmorgen / Motion Engineering 104/DSP PC/104 C-Programmable Motion Controller is used and in excellent condition.
SCP Modules and Terminal Block are sold separately. Please contact us for pricing and availability.
This National Instruments PCI-4551 2-Channel Dynamic Signal Acquisition Board is used and in excellent condition.

Part Number: 185016B-01, 185016E-01, 183919H-01
SVME-414-0000:
• (4) MPC7447 DSP Processors 1 GHz
• 256 MB Memory Per Processor

• (2) PMC Slots

Part Numbers: SVME-414-0000, 901922-001, 901877-003, 901877-000

This unit is sealed in the original manufacturer's box.

Configuration:

• 128-Kword On-board Memory

Part Number: 181475-11, 776597-02

This National Instruments PCI-4452 4-Channel Dynamic Signal Acquisition Board is new from surplus stock.

The National Instruments PCI-4452 is a high-accuracy, dynamic signal acquisition PCI plug-in board for making high-performance measurements. The NI PCI-4452 simultaneously digitizes input signals on four analog differential inputs over a bandwidth from DC to 95 kHz at sample rates up to 204.8 kS/s.

Part Number: 185015E-01, 777534-02, 778317-01
Product Family: 5998-01-479-3184, 5998014793184

This unit features adjustable Gain, Offset and Output controls which can be seen here.

Part Number 320-14200
Opt 1D4:
Additional Arbitrary Source installed

Opt 1DE:
Two input assemblies installed / Delete 8 input channels
Opt UGV:
Local bus interface installed


This unit comes with 1 Pentek 6235 GateFlow Dual Channel Wideband FFT Receiver VIM-2 Module installed.

View Photo of the Pentek 6235.

Pentek 6235 Datasheet (pdf)

Configuration:
• Processor Speed: 60MHz
• Memory: 2 MB
This BittWare T2-6U-cPCI Octal ADSP-TS201S TigerSHARC CompactPCI Board is used and in excellent condition.

Configuration:

• 512 MB SDRAM

Part Number: 92236-01, 92236-02

This Agilent E1485C Digital Signal Processor VXI Module is used, and in excellent condition.

Installed:
• Option ANE: 64MB of Memory

• (4) Option 104: 96002 DSP Cards Installed

Opt AYF: Tachometer Input
Opt UGV: Local Bus Interface Installed

Opt 1DE: Delete 8 Input Channels
Opt ANC: 32 MB total RAM


This National Instruments PCI-4452 4-Channel Dynamic Signal Acquisition Board is used and in excellent condition.

The National Instruments PCI-4452 is a high-accuracy, dynamic signal acquisition PCI plug-in board for making high-performance measurements. The NI PCI-4452 simultaneously digitizes input signals on four analog differential inputs over a bandwidth from DC to 95 kHz at sample rates up to 204.8 kS/s.

Part Number: 185015C-01, 185015F-01, 777534-02, 778317-01
Product Family: 5998-01-479-3184, 5998014793184

Configuration:

• (4) 500 MHz Processors
• 512 MB SDRAM
• 8 MB SRAM
• 8 MB Flash Memory
This unit is sealed in the original manufacturer's static bag.

Configuration:

• 128-Kword On-board Memory

Part Number: 181475-11, 776597-02

This board is VME64 compatible.

Configuration:
• Processor: Quad Motorola MPC-7410 (G4)

• Processor Speed: 400 MHz
• Process Bus Speed: 100 MHz
• Memory/Node: 256 MB SDRAM
• Cache/Node: 2 MB L2
• Flash/Node: 16 MB
• Ruggedization: Build Level 1, Air-Cooled (0 °C to 55 °C)
• PO Connector: Type B Fitted
• Boot ROM: BIT & VxWords 5.5

Part Number: 10772331

This Agilent / HP / Keysight E6404A IF Processor Module is used and in excellent condition.

Options Included in this Unit:

• Opt. 025 Add (4) DDCs (Digital Downconverters) to Mezzanine #1
• Opt. 026 Add 4MB RAM to Mezzanine #1
• Opt. 035 Add (4) DDCs (Digital Downconverters) to Mezzanine #2
• Opt. 036 Add a second mezzanine and 4MB RAM
• Opt. 040 second IF channel

Opt AYF: Tachometer Input
Opt UGV: Local Bus Interface Installed

Opt 1DD: Delete 12 Input Channels


Spectrum MDC40SS Super SRAM C40, TIM-40 Module Installed.
Configuration:
• 128-Kword On-board Memory

Part Number: 181475-11, 776597-02
This has the older-style terminal block interface (non-QUIC). There are no SCP modules installed. Please browse our inventory here: (Item #52336) for available SCP modules.

The Terminal Block is not included.

Opt 1DE:
Two Input Assemblies Installed / Delete 8 Input Channels

Opt AYF:
Tachometer Input

Configuration:
• Processor: 167 MHz TMS320C6701GJC167 DSP
• Memory: 16 MB DRAM
• Memory: 512 KB SRAM

• Omnibus Daughtercards are Sold Separately
This Agilent / HP / Keysight E6404A IF Processor Module is used and in excellent condition.

Options Included in this Unit:

• Opt. 022 Add (1) DDC (Digital Downconverter) to Mezzanine #1
• Opt. 026 Add 4MB RAM to Mezzanine #1
• Opt. 032 Add (1) DDC (Digital Downconverter) to Mezzanine #2
• Opt. 036 Add a Second Mezzanine and 4MB RAM
• Opt. 040 Second IF channel

The Pentek 4283 Floating Point DSP MIX Module for VMEbus is based on the Texas Instruments TMS320C30 Floating Point Digital Signal Processor. It features the 32 MFlop TMS320C30 DSP chip, up to 8 MB of dual-ported DRAM, 256 KB of high-speed SRAM, and 128 KB of EPROM. Since the Model 4283 may function as a VMEbus master and/or system controller, the TMS320C30 may access VMEbus resources simply by reading or writing to certain portions of its memory map. When installed in Slot 1, the Model 4283 can drive the system clock and reset signals and function as the bus arbiter.

Configuration:
• Option 002: 4 MB Dual-Port DRAM
This unit is also labeled as having Option 063

Part Number: 332017
Daughtercard Part Number: 2284006

This board is VME64 compatible.

Configuration:
• Processor: Quad Motorola MPC-7410 (G4)

• Processor Speed: 500 MHz
• Process Bus Speed: 100 MHz
• Memory/Node: 256 MB SDRAM
• Cache/Node: 2 MB L2
• Flash/Node: 16 MB
• Ruggedization: Build Level 2, Air-Cooled, Conformal Coated (-20 °C to 65 °C)
• PO Connector: Type B Fitted
• Boot ROM: BIT & VxWorks 5.5

Part Numbers: 10490989

Configuration:

• (4) 400 MHz Processors
• 512 MB SDRAM
• 8 MB Flash Memory
This Curtiss-Wright / DY-4 Compact CHAMP-AV High Performance Digital Signal Processing (DSP) is used and in excellent condition. This unit is also known as Ixthos IXA4.

Configuration:
• (4) MPC7400 PowerPC Processors 450 MHz
• 128 MB DRAM
• 4 MB SRAM
• 16 MB Flash Memory

Part Numbers: SCP-419-0400, SCP-420, 901774-000

Installed Options: 004 (+/- 3ppm internal reference).

This unit features adjustable Gain, Offset and Output controls which can be seen here.

Part Number: 002.10200, 8363001D, 320-14200

This unit has a double-wide faceplate for compatibility with the PEX3 PMC expansion option.

Configuration:

• (4) 500 MHz Processors
• 256 MB SDRAM
• 16 MB Flash Memory

This National Instruments PCI-4454 4-Channel Dynamic Signal Acquisition Board is used and in excellent condition.

The National Instruments PCI-4454 is a high-accuracy, dynamic signal acquisition PCI plug-in board for making high-performance measurements. The NI PCI-4454 simultaneously digitizes input signals on four analog single-ended inputs over a bandwidth from DC to 23 kHz at sample rates up to 51.2 kS/s.

Part Number: 186957A-01

This National Instruments PCI-4454 4-Channel Dynamic Signal Acquisition Board is new from surplus stock.

The National Instruments PCI-4454 is a high-accuracy, dynamic signal acquisition PCI plug-in board for making high-performance measurements. The NI PCI-4454 simultaneously digitizes input signals on four analog single-ended inputs over a bandwidth from DC to 23 kHz at sample rates up to 51.2 kS/s.

Part Number: 186597A-01

Configuration:
• (4) DSP Processors: 1 GHz
• Memory: 64 MB Per Processor

Part Number: 71405, 80089
Configuration:
• Number of Channels: 4
• Environmental: 0°C to +70°C
• Mechanical: P2 I/O Only

• Excitation: With, One Common Excitation Input Tied to the Excitation Supply
• Options: None
• Frequency (Hz): 2.8k - 3.2K

Configuration:
• TMS320C31 Floating-Point DSP
• 512 KB SRAM


Product Family: 7050-01-426-6800, 7050014266800
Configuration:
• Processor: 160 MHz TMS320C6701GJC DSP
• Memory: 16 MB DRAM
• Memory: 1 MB SRAM

• Omnibus Daughtercards are Sold Separately
Options Installed:
• Option 1D4: Arbitrary Source Features

Part Number: VT1432B-1D4
This Emerson / Mizar 7772 Octal Octal Processor DSP VME Module is used and in excellent condition.

Part Number: 7772-8P-A2-10

Configuration:

• (8) C40 Processors
• 50 MHz
• 0.5 MB Local SRAM
• 2 MB Global SRAM

Opt 1D4:
Additional Arbitrary Source Installed
Opt UGV:
Local Bus Interface Installed
This Ariel HydraPlus Quad TMS320C40 DSPs is used and in good condition. This unit is the four-processor 50 MHz HydraPlus with 8 Mbyte SRAM, 4 Mbytes shared DRAM, and VSB interface.

Part Number: HYV354M32B1
Opt 1D1: Povides real-time 1/1 or one-third octave measurements. Third octave bands cover 3.15 Hz to 20 kHz and the Full Octave bands cover 4 Hz to 16 kHz. All eight channels of the E1433B can be performing real-time octave measurements simultaneously
Opt ANC: 32MB RAM
Opt AYF: Tachometer Input
Opt UGV: Local bus interface installed

This Emerson / Mizar 7772 QUAD C40 DSP VME Module is used and in excellent condition.

Part Number: 7772-4N-12-10

Configuration:

• (4) C40 Processors
• 8 MB RAM
• 7870-VSB4-01N-7 Daughtercard

This unit has a chipped PCB board; however, this will not prevent it from functioning properly.

Opt 1D4:
Additional Arbitrary Source installed

View Photo of chipped PCB board.

This 4DSP FM482V1 Virtex-4 PMC DSP Accelerator is used and in excellent condition. This PMC module has the V1.0 camera link card attached.

Configuration:
• Memory: 32 MB SRAM


This Agilent E1485C Digital Signal Processor VXI Module is used, and in excellent condition.

Installed:
• 16MB of Memory
This Emerson / Motorola / Loughborough DBV66/0P6-033 ADSP-21062 SHARC VME Board is used and in excellent condition. This unit includes a DBV66 Hardware Documentation Disk and an IDE6000 SHARC Disk.

Configuration:
• 6 ADSP-21062 DSP Processors
• 1 MB SRAM

Configuration:
• (4) C6201 DSP Modules
• 64 MB SDRAM
• 2 MB SRAM

• 512 KB Flash

Part Numbers: 1030965-0002, 1030965-0003, 260-00800


This Mercury Computer Systems MC3200 Sequencing Module is used and in excellent condition.
This Curtiss-Wright / VMETRO / Transtech DSP VQG4 Single Board Computer VXS Module is used and in excellent condition.

Configuration:

• (4) MPC7410 450 MHz Processors
• 2 MB L2 Cache For Each Processor
• 512 MB SDRAM With Parity

Installed Options: 004 (+/- 3ppm internal reference).

This unit features adjustable Gain, Offset and Output controls which can be seen here.

The Pentek 4283 Floating Point DSP MIX Module for VMEbus is based on the Texas Instruments TMS320C30 Floating Point Digital Signal Processor. It features the 32 MFlop TMS320C30 DSP chip, up to 8 MB of dual-ported DRAM, 256 KB of high-speed SRAM, and 128 KB of EPROM. Since the Model 4283 may function as a VMEbus master and/or system controller, the TMS320C30 may access VMEbus resources simply by reading or writing to certain portions of its memory map. When installed in Slot 1, the Model 4283 can drive the system clock and reset signals and function as the bus arbiter.

Configuration:
• Option 007: 8 MB Dual-Port DRAM
• Option 400: Processor Clock: 40 MHz

Part Number: 332017
Daughtercard Part Number: PC.2859007C

This Curtiss-Wright / DY-4 / Ixthos IXD7232 Real-Time Signal Processing VME Board is used and in excellent condition.

Configuration:
• (2) DSP Microprocessors: 33 MHz
• Data Memory: 512 KB SRAM (Per DSP)
• Program Memory: 192 KB SRAM (Per DSP)
• IXM Memory Mezzanine with 128 KB Global Memory (PN: IXM3S32-33)

This Innovative Integration PC31 ISA Bus Plug-In Supercontroller is used and in good condition. This unit does not include items at locations: U105, U101 and U102, U99 and U100, J104, J103, U78, U79, R50, R51, and U98.

Configuration:
• TMS320C31 Floating-Point DSP
• 512 KB SRAM


Product Family: 7050-01-426-6800, 7050014266800

Configuration:

• (4) 400 MHz Processors
• 512 MB SDRAM
• 64 MB Flash Memory
• 512 KB DIP EPROM

• Conformal Coated
This unit has a double-wide faceplate for compatibility with the PEX3 PMC expansion option.

Configuration:

• (4) 400 MHz Processors
• 512 MB SDRAM
• 64 MB Flash Memory
• 512 KB DIP EPROM
• PSTK-D Daughter Card

This unit has a double-wide faceplate for compatibility with the PEX3 PMC expansion option.

Configuration:

• (4) 400MHz Processors
• 512 MB SDRAM
• 64 MB Flash Memory
• 512 KB DIP EPROM
• PSTK-D Daughter Card

Showing 1-100 of 241 Results
Contact Us
Fax:

(240) 376-1381