Items/Page
79 / 79 Results
This Keysight / Agilent E4418B EPM Series Single Channel Power Meter Front Panel is used and in excellent condition. This unit includes the Power REF rear connection as viewed in photo below.

View Photo of internal components.

Part Number(s): E4418-61001, E4418-61030, E4418-69031


This Yokogawa PZ4000 Power Analyzer is new from surplus stock.

Configuration:
• 253710: 100 - 120 / 200 - 240 VAC
• -X: Power Cord Type

• /M3: Extend memory to 4 Mword/CH
• No Modules are Installed
• No Software is Included

Part Number: 253710-X/M3

External cables are not included. (This is also considered Option 004)
This unit has the power ref and sensor on the back panel.
This Boonton 4500B RF Peak Power Analyzer is used and in excellent condition.

Configuration:

• Opt 01 - Dual Channel Installed
• 256 MB Memory
• CPU 665 MHz
Product Family: 6625-01-577-8975, 6625015778975

This 3G Tech / HBS Equipment 700 Digital Amp / Time Meter is used and in excellent condition.
This Agilent / HP 436A Power Meter is used and in excellent condition. Power Sensor and Power Sensor Cable are sold separately.

Opt 022:
GPIB Remote Control

Configuration:
• Linearity: < 3%
• Measurement Resolution: .01 dB
• Offset Range: -100 to +150dB

• Maximum Number of Slots: 128
• Slot Width: .01 ms to 100 ms

Included:
• USB Connector Cable
• Anritsu 1091-80-R Adapter
• ePCBL-C0823 BNC to SMB Cable

Part Number: 199764A-01, 781214-01

This Agilent / HP E4418A (EPM-441A) EMP Series Power Meter is used and in excellent condition. There are no options installed.

Agilent / HP E4418A (EPM-441A) EMP Series Power Meter Manual (pdf)

This Giga-tronics 8542C Universal Power Meter is used and in good condition.

Configuration:
• Frequency Range 100 kHz to 40 GHz

• Power Range: -70 to +47 dBm
• Linearity: ±0.02 dB
• Input Type: Dual
• Rackmount Ready (No Feet Included)

Configuration:
• Option 02: Add 128 KB Buffer for Fast Measurements. Stores 128 KB Single Channel Readings or 64 KB Each Dual Channel.
Product Family: 6625-01-506-6655, 6625015066655

This Brandenburg 139D Digital High Voltage Meter is used and in excellent condition.

Configuration:

• Voltage Ranges: 0 to ±20kV dc and 0 to ±40kV dc
• Resolution: 10V on 20kV (spot) at 23 °C
• Input Resistant: 30,000MΩ
• Input Current: Less than 2µA drawn from circuit under test at maximum voltage
• Dimensions: 215 x 60 x 185 mm (plus connectors)

This Aeroflex / IFR 6970 RF Power Meter is used and in excellent condition. The internal battery is used.

Options:

• Option 001: Precision n-Type Connector for Power Reference

Unit Includes:
• Carrying Pouch

This Agilent/HP E4418B EPM Series Power Meter is used and in excellent condition. This variant of the E4418B has hardware option 001 installed, which provides the unit with a rechargeable internal battery, allowing for full functionality when an AC power outlet is not available. The internal battery is used.

Agilent / HP E4418B EPM Series Power Meter Manual (pdf)

Configuration:
• Option: RS-485 Serial Channel Communication Connection
Configuration:
• Frequency Range: 10 MHz - 18 GHz
• Nominal Impedance: 50Ω

• Maximum SWR (Reflection Coefficient):
  10 MHz to 30 MHz <1.4 (0.166)
  30 MHz to 50 MHz <1.18 (0.083)
  50 MHz to 2 GHz <1.10 (0.048)
  2 GHz to 12.4 GHz <1.18 (0.083)
  12.4 GHz to 18 GHz <1.28 (0.123)

Configuration:
• Basic Unit: GIMA 400 Meter
• Power Supply: 115 VAC @ 45-65 Hz
• Voltage Input: 277/480 V

• Current Input: 5 Amps @ 45-65 Hz

This Boonton 4500A RF Peak Power Meter/Analyzer is used and in excellent condition.

Configuration:
• CPU: 100 MHz
• RAM: 4 MB
This Fluke / Wavetek 17501 Power Sensor is used and in excellent condition.

Part Number(s): 17501, K0175
This Newport / New Focus 2103 High-Dynamic-Range (HDR) Power Sensor is used and in excellent condition.

Configuration:

• Uncalibrated Wavelength Range: 950-1650 nm
• Connector Type: Accepts both FC/PC and FC/APC
• Bandwidth Settings: 1, 5, 25 kHz
• Output Type: Analog
• Max Input Power: 4 dBm
• Photodiode Type: InGaAs
• Output Connector: BNC

This Aeroflex / IFR 6970 RF Power Meter is used and in excellent condition. The internal battery is used.
Options:

• Option 001: Precision n-Type Connector for Power Reference

Unit Includes:
• 6900 Series Sensor Manual
• 6930 Sensor
• 6970 Manual
• 6970 Operating Summary
• AC Adapter
• Anritsu Precision OSL Calibration Kit
• Carrying Case with Shoulder Strap
• Sensor cable

This Keysight / Agilent E4418B EPM Series Single Channel Power Meter Front Panel is new from surplus stock. This unit includes the Power REF rear connection as viewed in photo below.

View Photo of internal components.

Part Number(s): E4114-61001, E4418-69031


MAPM+2PS11:
• SMF and MMF with N/A ≤ 0.27 Fiber
• 800 to 1650 nm Wavelength Range

• -80 to 10 dBm Power Range
• > 55 dB Return Loss
• (2) 3 mm InGaAs Detectors
• (2) Option AC101: FC Adapters

This Keysight / Agilent E4418B EPM Series Single Channel Power Meter Front Panel is used and in excellent condition. This unit does not include the Power REF rear connection as viewed in photo below.

View Photo of internal components.

Part Number: E4418-61001


Option:
• H76: Freq Range 1MHz to 1GHz, Max SWR 1.3 Except 1.05 at 50MHz
This Giga-tronics 8542B Universal Power Meter is used and in excellent condition.

Configuration:
• Frequency Range 10 MHz to 40 GHz

• Power Range: -70 to +47 dBm
• Linearity: ±0.02 dB
• Input Type: Dual
• Rackmount Ready (No Feet Included)

Configuration:
• IEEE-488 Installed
• Detectors sold separately

View IEEE-488 Interface Manual Here
This Agilent / HP E4418B EPM Series Power Meter is used and in excellent condition. It does not come with any hardware options.

Agilent / HP E4418B EPM Series Power Meter Manual (pdf)

Configuration:
• IEEE-488 Not Installed
• Detectors sold separately
This Giga-tronics 8542C Universal Power Meter is used and in excellent condition. This unit ships with two 15-pin cables.

Configuration:

• Frequency Range 100 kHz to 40 GHz
• Power Range: -70 to +47 dBm
• Linearity: ±0.02 dB
• Input Type: Dual
• Benchtop (Feet Included)
• (2) 20954-001 Cables

View Photo of included cables

Configuration:

• Requires Exfo FOA Connector Input
• Power Range: 9 to -85 dBm

• Wavelength Range: 800 to 1700 nm
• Detector Type: InGaAs
• Number of Channels/Detectors: 4

*The Exfo FOA adapters for detector inputs are sold separately. They can be purchased here

This unit has the power ref and sensor on the front panel.
This Agilent / HP 438A Dual Channel Power Meter is used and in excellent condition.

Configuration:

• Rackmount Ready
This Aeroflex / Willtek / Wavetek 8502 Peak Power Meter is used and in excellent condition. This unit includes the rackmount handles.

Part Number: 8502-S5524
This Agilent / HP 438A Dual Channel Power Meter is used and in excellent condition.

Configuration:

• Rackmount Ready
• Option 002: Rear Panel Sensor Connector (in parallel with front panel) and additional reference oscillator with rear panel output

This Agilent / HP 436A Power Meter is used and in excellent condition. Power Sensor and Power Sensor Cable are sold separately.
Configuration:
• (3) Input Terminals
• Remote Control and Analog Output Connection Installed
This JDSU / Acterna / Wandel & Goltermann SPM-30 Pegelmesser Level Meter is used and in excellent condition.

Frequency Range:
• Coaxial: 200 Hz to 1.62 MHz

• Balanced: 200 Hz to 620 kHz

Input Power: 115/230 VAC

This unit has cosmetic scratches on the faceplate; however, this does not affect its ability to function properly.

View Photo of the faceplate.

View Photo of the optical interface for this unit. Connector adapter caps will be listed for sale separately on this page, if in stock.

This Anritsu ML4803A Power Meter is used and in excellent condition. This unit includes an MZ5003A power supply, an MA4001A range calibrator, and an MA4601A power sensor.

Input Power: 120 VAC
This Anritsu ML4803A Power Meter is used and in excellent condition. This unit includes an MZ5003A power supply, an MA4001A range calibrator, and a 5 ft connector cable.

Input Power: 120 VAC
This Newport / ILX Lightwave Optical Photodiode Assembly is used and in excellent condition.
Part Number IQ-1643T-PL-SN
Channels: 4
Detector: InGaAs
Wavelength Range: 800 to 1700nm
Power Range: 9 to -85 dBm
Low Polarization-Dependent Response


*The Exfo FOA adapters for detector inputs are sold separately. They can be purchased here.

This Agilent / HP 8484A Power Sensor is used and in excellent condition.
This Boonton 41-4B Power Sensor is used and in excellent condition.
This EADS / Racal / Dana 5002 Wideband Level Meter is used and in excellent condition.
This EADS / Racal / Dana 5002 Wideband Level Meter is used and in excellent condition.

Configuration:

• Option 01: Rear Input
• Option 60: Rack Mount Kit


Configuration:
• Number of Channels: 2

Part Number: 1Z01601
Configuration:
• Option 001: Adds (2) Sensor Ports (4 Total)

Part Number: 41140-42810-9112
This Aeroflex / Willtek / Wavetek 8502 Peak Power Meter is used and in excellent condition. This unit does not include the rack mounts.

Part Number: 8502-S5524
This 2nd Harmonic Grade DC Test Module is used and in excellent condition.

View front of the unit.
View top of the unit.
View bottom of the unit.

This Yenista / NetTest / Photonetics GN-6025C Power Meter is used and in excellent condition.

This unit comes with a paper copy of the Operator's Manual and a set of batteries.


Part Number: GN-6025C

Configuration:
• Channels: 4
• Power Log Period: 5 Seconds to 500 Hours

• Max. Real Time Data Logging to PC: 25,000Hz

Part Number: 7Z01201

Configuration:
• Absorber: LP: 0.4 - 1.5µm, 10.6µm
• Aperture: Ø 50mm

• Digital Power Scales: 300W / 30W

Part Number: L300W-LP

Configuration:
• Display: LCD 640 x 480 Pixels with Backlight
• Floppy Drive: 1.44 MB 3" PC-Format

• Software Version: 1.20
Configuration:
• Range: 3dBm to -75dBm

• Wavelengths: 365 nm, 780nm, and 850nm

*The Greenlee / Tempo / RIFOCS Snapon Connector (SOC) Adapters can be installed upon request. They can be purchased here.

Configuration:
• Number of Detectors: 1
• Detector Type: GeX
• Detector Size: 2mm

• Wavelength Range: 800 to 1660 nm
• Power Range: 21 to -53 dBm
• Sampling Rate: Up to 5208 Sample/s/Channel
• Fiber Type: 5/125 to 62.5/125 µm

Power Sensors are sold separately.
This unit does not include the base; however, this will not prevent it from functioning properly.

Configuration:

• Spectral Range: 1.06,10.6 mm
• Cooling: Fan
• Adapter: SH to BNC

Part Number: 1Z02635, 1Z02630

This Keithley 2800 RF Power Analyzer is used and in excellent condition.

Configuration:
• Improbability: IEEE-488.2 (SCPI-1995.0)

• Memory Buffer: 2500 Sets of 5 Readings
• Digital I/O: 1-TTl Digital Input, 4-Digital Outputs with 250mA Sink
• Power Supply: 100V / 120V / 220V / 240V
• Warm-Up: 1 Hour to Rated Accuracy

Configuration:
• Linearity:
  • Power Level < 18 dBm: ±0.13 dB
  • Power Level ≥ 18 dBm: ±0.18 dB

• Measurement Resolution: 0.01 dB
• Offset Range: ± 100 dB

Included:
• USB Connector Cable

Part Number: 780167-01

This Newport / ILX Lightwave 3811 Digital Board is used and in excellent condition.

Configuration:

• Cable Length: 6.5 in (16.51 cm)
• Wire Length: 8.25 in (20.96 cm)

Model Number: FOWM-IG-45
Wavelength Range: 800-1650 nm

Optical Interface: FC/PC or SC/PC (please specify preference when ordering) *This is a freespace interface (to an internal Burleigh interferometer) and works also with an APC interface.

Model Number: FOWM-IG-55
Wavelength Range: 800-1650 nm

Optical Interface: FC/PC or SC/PC (please specify preference when ordering) *This is a freespace interface (to an internal Burleigh interferometer) and works also with an APC interface.

This unit has some blemishes on the screen, this however does not effect its functionality.

Input Voltage: 115 VAC Only


View Photo of representative blemishes

This unit has scratches on the LCD, however this does not affect the functionality of the unit.

View Photo of scratches.

Input Voltage: 115 VAC Only

This item has some cosmetic damage; however, this will not prevent it from functioning properly.

Configuration:

• Number of Channels: 2

View a Representative Photo of the Cosmetic Damage.

Part Number: 1Z01601

Unit is missing battery cover; however, this does not effect unit functionality.
This Agilent / HP 441A EPM Series Power Meter is used and in excellent condition. The back of the unit indicates that option 8ZE is installed.

Agilent / HP 441 EPM Series Power Meter Manual (pdf)

This unit has cosmetic damage to the housing; however, this does not affect its ability to function properly.

Part Number: 857.8008.02


View a Representative Photo of housing cosmetic damage.

79 / 79 Results
Contact Us
Fax:

(240) 376-1381