Power Supplies / AC Sources / Load Modules
- A/D / Digitizers / Oscilloscopes / Recorders / Dataloggers
- Adapters / Extenders / Terminal Blocks
- Amplifiers / Attenuator / Signal Conditioning
- ATE
- Audio Testers
- Battery Testers / Chargers / Analyzers
- Breadboard / Prototyping
- Bus Analyzers / JTAG / Emulator / Exerciser
- Cables / Cabling
- Carriers
- Control Bus Interfaces / SCSI / RS232 / Ethernet / Repeaters
- Controllers / Slot-0 / Status Monitors
- D/A / Function / Signal / Arb Sources
- Data Acquisition / DAQ / Multifunction
- Digital I/O
- DSP / Closed Loop / PID
- Electrical Parts
- Electrical-to-Optical
- Frequency Counters
- Hipot Testers / Ground Test / ESD
- IC Testers / Programmers
- Imaging / Vision / Graphics Processors / Framegrabbers
- Integrated Circuits
- LCR / Impedance Meters
- Logic Analyzers
- Mainframes / Chassis
- Memory / RAM / Disk / Flash / Storage / Repeater
- Multimeters / Electrometers / Ammeters
- Noise Generators / Analyzers
- Oscillator / Clock / Timing / Time Code
- Other Electrical
- Power Meters
- Probes / Test Fixtures
- Pulse / Pattern Generators
- RF / Spectrum Analyzers / Microwave / IF
- Source Measure Units (SMU) / Calibration
- Switches / Relay / MUX / DEMUX
- Tachometer / Encoder / Synchro / Resolvers / Decoders
- Time Interval Analyzers / Delay Generators
- Transfer Switch / Fuse / Breaker
- Transition Modules
- TV and Video Test
- Vector Signal Analyzers
This is an AC adapter for the National Instruments SC-2345 Signal Conditioning Connector Block and various other NI products.
Power Adapter Model Number: PS01
Power Adapter Part Numbers: AEH45UM32, 10063-03, SPA40-3555, 723045-0
Power Adapter Model Number: PS01
Power Adapter Part Numbers: AEH45UM32, 10063-03, SPA40-3555, 723045-0
This unit is also known as the GE 2375101-5 DPS with USB Interface.
Part Number: 140577-5
Part Number: 140577-5
Configuration:
• Channels: 1
• Full Modulation Span: 0/4-20 mA (0/3.8-20.5 mA)
• Load: 0-600 Ω
• Channels: 1
• Full Modulation Span: 0/4-20 mA (0/3.8-20.5 mA)
• Load: 0-600 Ω
Part Number: 127610-01, 126399-01G, 127610-99
This unit is manufactured by Quantum Power Labs with Model Number AP2-5400F.
Part Number: 01-W2360E01A
Part Number: 01-W2360E01A
Part Number: 1-199-03
Rackmount chassis.
• Output Voltage = 0-6V
• Output Current = 0-200A
• Output Power = 1200W
• Efficiency: 75%
• Output Voltage = 0-6V
• Output Current = 0-200A
• Output Power = 1200W
• Efficiency: 75%
Configuration:
• Input Power: 120/240 VAC or 125VDC Input
Part Number: P0922YU
• Input Power: 120/240 VAC or 125VDC Input
Part Number: P0922YU
Configuration:
• Fan Type Q: Integral - Quiet Fan - Forward Air
• Input Connection: S: Screw Terminals
• Filter Option M: 650µA Max Leakage
• Primary Option: FV: AC Fail + Fan Inhibit
• Input Voltage: 90-264 VAC
• Voltage Outputs: (2) 5 Volt 20A, (2) 12 Volt 12A
Part Number: V406TCX
• Fan Type Q: Integral - Quiet Fan - Forward Air
• Input Connection: S: Screw Terminals
• Filter Option M: 650µA Max Leakage
• Primary Option: FV: AC Fail + Fan Inhibit
• Input Voltage: 90-264 VAC
• Voltage Outputs: (2) 5 Volt 20A, (2) 12 Volt 12A
Part Number: V406TCX
This unit is sealed in the original manufacturer's box.
Configuration:
• 100-240 VAC Input
• 12 VDC Output
• 3A Output Current
Part Number: 780046-01
Possible lead time of 7-12 business days. Please contact our sales department for pricing and availability.
Configuration:
• 100-240 VAC Input
• 12 VDC Output
• 3A Output Current
Part Number: 780046-01
Possible lead time of 7-12 business days. Please contact our sales department for pricing and availability.
Total Outputs: 4
(2) 0-7V, 0-5A or 0-20V, 0-2A
(2) 0-20V, 0-2A or 0-50V, 0-0.8A
(2) 0-7V, 0-5A or 0-20V, 0-2A
(2) 0-20V, 0-2A or 0-50V, 0-0.8A
Configuration:
• Input Voltage: 100-120/220-240 VAC
• Output Power: 100 W
• Input Voltage: 100-120/220-240 VAC
• Output Power: 100 W
This is also known as Cognex Product Identification Number CPS-AC-POE1A-US, Part Numbers: 158-1025R and 823-0031-1R.
Terminal Block / DC Module sold separately.
Output Ratings at 40°C
• Output voltage: 0 to 35 V
• Output current: 0 to 4.5 A
• Maximum power: 150 W
Output Ratings at 40°C
• Output voltage: 0 to 35 V
• Output current: 0 to 4.5 A
• Maximum power: 150 W
Configuration:
• Voltage Range: 0 V to 60 V
• Current Range 0 A to 50 A
• Voltage Programming Accuracy: 0.035%, +40 mV
• Current Programming Accuracy: 0.2%, +85 mA
• Voltage RMS: 8 mV
• Voltage Peak-to-Peak: 40 mV
• Current RMS: 25 mA
• Voltage Readback Accuracy: 0.08%, +20 mV
• Current Readback Accuracy: 0.36%, +35 mA
This TDK-Lambda LFS-42-28 Regulated Power Supply is used and in excellent condition.
Input:
85-132 / 170-250 / 250-350 (Jumper Selected)
3.0 A Max
Output:
28±5% VDC
Max Ratings:
5.0 A at 40° C
4.4 A at 50° C
3.7 A at 60° C
Input:
85-132 / 170-250 / 250-350 (Jumper Selected)
3.0 A Max
Output:
28±5% VDC
Max Ratings:
5.0 A at 40° C
4.4 A at 50° C
3.7 A at 60° C
This power supply can be used in some of the Tracewell T-Frame VME mainframes.
Part Number: 050-1158-000-PS
Product Family: 6130-01-550-5057, 6130015505057
Part Number: 050-1158-000-PS
Product Family: 6130-01-550-5057, 6130015505057
This Rockwell/Allen-Bradley 1794-ASB FLEX I/O 24VDC RIO Remote I/O Adapter is used and in excellent condition.
Configuration:
• I/O Module Capacity: 8
• Communication Rate: 57.6, 115.2, 230.4 Kbps
• Power Consumption at 24V: 7.9W
• Input: 24VDC, 450mA; Output: 5VDC, 640 mA
Part Number: 96265871, 96404877, 96333271
Configuration:
• I/O Module Capacity: 8
• Communication Rate: 57.6, 115.2, 230.4 Kbps
• Power Consumption at 24V: 7.9W
• Input: 24VDC, 450mA; Output: 5VDC, 640 mA
Part Number: 96265871, 96404877, 96333271
This Weir SMM 200 Industrial Power Supply is used and in excellent condition.
Input Voltage: 115 VAC
Input Voltage: 115 VAC
This Tektronix FH0410 AWG Power Supply is new from surplus stock. The model number is FH0410 and is used in the AWG400, AWG615, and AWG710 Arbitrary Waveform Generator.
Input Voltage: 120-240V AC
Input Voltage: 120-240V AC
AC9-ECLACD-00-XSO Configuration:
• 9: ACE900F
• E: 150W Module Single Output +12V
• C: 150W Module Single Output +5V
• L: 50W Module Single Output +3.3V
• A: 150W Module Single Output +2V
• C: 150W Module Single Output +5V
• D: 150W Module Single Output +7.5V
• 00: No Parallel Code
• XSO: Available Options
Part Number: 0312822R, AC9-ECLACD-00-XSO
• 9: ACE900F
• E: 150W Module Single Output +12V
• C: 150W Module Single Output +5V
• L: 50W Module Single Output +3.3V
• A: 150W Module Single Output +2V
• C: 150W Module Single Output +5V
• D: 150W Module Single Output +7.5V
• 00: No Parallel Code
• XSO: Available Options
Part Number: 0312822R, AC9-ECLACD-00-XSO
Configuration:
• Rackmount Ready
• Output Voltage: 0 to 20 V
• Output Current: 0 to 5 A
This Newport / New Focus 0901 Current-Limited Power Supply is used and in excellent condition. The power switch is on the front of this unit. This unit has pico(m8) connector outputs.
±15 V (±3%) Output Voltage
View Photo of pico(m8) connector outputs.
±15 V (±3%) Output Voltage
View Photo of pico(m8) connector outputs.
This Perkin Elmer PS-1120-1 Variable Output Power Supply is used and in excellent condition.
• Input Voltage: 15-28 V
• Output Voltage: 400-1000 V
• -1: 0.1µF ±10%
• Xenon Arc Strobe power supply
• Flashpac, flashlamp, Lite-Pac power supply
Part Number: 502-1120
Configuration:
• Input Voltage: 15-28 V
• Output Voltage: 400-1000 V
• -1: 0.1µF ±10%
Used as:
• Xenon Arc Strobe power supply
• Flashpac, flashlamp, Lite-Pac power supply
Part Number: 502-1120
Part Number: 710-1161
This TDK-Lambda LHOV-5 is the Elma 21-Slot VME Monolithic Chassis Overvoltage Protector.
LMOV / LHOV Overvoltage Protectors Manual (pdf)
LMOV / LHOV Overvoltage Protectors Manual (pdf)
GPIB Option Installed
• Output Voltage = 0-60V
• Output Current = 0-20A
• Output Power = 1200W
• Efficiency: 86%
Part Number: 127610-01, 126399-01G
This Proxim Tsunami WLH-A07T Power Supply Multipoint 20 Base Station is new from surplus stock. Cables Sold Separately.
AC Input: 100-240V ~ 1.5A, 50/60Hz
DC Output: +48V, 1A
Part Number: 55001206
AC Input: 100-240V ~ 1.5A, 50/60Hz
DC Output: +48V, 1A
Part Number: 55001206
This Newport / New Focus 0901 Current-Limited Power Supply is used and in excellent condition. This unit has microtech connector outputs.
±15 V (±3%) Output Voltage
View Photo of microtech connector outputs.
±15 V (±3%) Output Voltage
View Photo of microtech connector outputs.
Configuration:
• Output: 5V, 24V, -15V, 15V
• Output Minimum: 3A, 0A, 0A, 0A
• Output Maximum (Unrestricted Natural Convection Cooling): 16A, 3.5A, 1.2A, 1.2A
• Output Maximum (Requires 26 cfm Moving Air): 20A, 3.5A, 1.2A, 1.2A
• Output Peak: 25A, 5A, 1.5A, 1.5A
• Noise P-P: 50mV, 240mV, 150mV, 150mV
• Total Regulation (Maximum Deviation from the Nominal Voltage): 2%, 2%, 3%, 3%
• Output: 5V, 24V, -15V, 15V
• Output Minimum: 3A, 0A, 0A, 0A
• Output Maximum (Unrestricted Natural Convection Cooling): 16A, 3.5A, 1.2A, 1.2A
• Output Maximum (Requires 26 cfm Moving Air): 20A, 3.5A, 1.2A, 1.2A
• Output Peak: 25A, 5A, 1.5A, 1.5A
• Noise P-P: 50mV, 240mV, 150mV, 150mV
• Total Regulation (Maximum Deviation from the Nominal Voltage): 2%, 2%, 3%, 3%
Configuration:
• Nominal Voltage: 48V
• Adjustable Range: 36-56V
• Minimum Load: 0
• Maximum Current: 31.2
• Load Regulation (mV): <480
• Line Regulation (mV): <480
• Ripple and Noise (mv p-p): 500
• Nominal Voltage: 48V
• Adjustable Range: 36-56V
• Minimum Load: 0
• Maximum Current: 31.2
• Load Regulation (mV): <480
• Line Regulation (mV): <480
• Ripple and Noise (mv p-p): 500
This Cooper Hand Tools / Weller WECP-20 Soldering Station Power Supply is used and in good condition. This is for the Power supply base (as pictured), without a solder pen or support rack.
Input Voltage: 220V (European power connector).
Input Voltage: 220V (European power connector).
Configuration:
Input: 100-120V at 50/60/400Hz and 240V at 50/60Hz
Output: 600 W Max Total
Part Number: 0950-3276
Input: 100-120V at 50/60/400Hz and 240V at 50/60Hz
Output: 600 W Max Total
Part Number: 0950-3276
This Ametek / Elgar / California Instruments 1503L-3P AC Power Supply is used and in excellent condition.
Model Number: 1503L-3P
Part Number: 4008-409-1
1503L-3P
• Programmable Controller Module Installed
• Input Voltage: 115/230 VAC
• Input Phase: 1
• Input Frequency: 47-440 Hz
• Output Voltage: 0-135 VAC, 0-270 VAC
• Output Phase: 1 or 3
• Output Frequency: 17 Hz - 5 kHz
• Option P: Programmable Controller
• Option MODE: Provides Selectable 1 or 3 Phase Output
Model Number: 1503L-3P
Part Number: 4008-409-1
1503L-3P
• Programmable Controller Module Installed
• Input Voltage: 115/230 VAC
• Input Phase: 1
• Input Frequency: 47-440 Hz
• Output Voltage: 0-135 VAC, 0-270 VAC
• Output Phase: 1 or 3
• Output Frequency: 17 Hz - 5 kHz
• Option P: Programmable Controller
• Option MODE: Provides Selectable 1 or 3 Phase Output
Part Number: 125840-01, 3500/15
This 3P Pacific Power Products KPT300L-Q2 Redundant Mini Power Supply is used and in excellent condition.
Configuration:
• VAC Input: 100-120/200-240
• VDC Outputs: 5V/30A, 12V/11A, -5V/1A, -12V/1A, 3.3V/22A, 5Vsb/1.5A
• Max Output Power: 300W
• Approximate Dimensions: 5.75, 8.5, 1.75in
Configuration:
• VAC Input: 100-120/200-240
• VDC Outputs: 5V/30A, 12V/11A, -5V/1A, -12V/1A, 3.3V/22A, 5Vsb/1.5A
• Max Output Power: 300W
• Approximate Dimensions: 5.75, 8.5, 1.75in
This Thermo 3000P High-Voltage Power Supply is used and in excellent condition.
• Max. Voltage: 3000 V
• Max. Current: 300 mA
• Max. Power: 300 W
Configuration:
• Max. Voltage: 3000 V
• Max. Current: 300 mA
• Max. Power: 300 W
Input Voltage: 115 VAC
Input Voltage: 24-87 VDC
Part Number: ZT 6310F
Part Number: ZT 6310F
Terminal Block / DC Module sold separately.
Output Ratings at 40°C
• Output voltage: 0 to 60 V
• Output current: 0 to 2.5 A
• Maximum power: 150 W
Output Ratings at 40°C
• Output voltage: 0 to 60 V
• Output current: 0 to 2.5 A
• Maximum power: 150 W
This Ametek / Elgar / Sorensen MML-80-20-102 Load Module is used and in excellent condition.
• 80 V
• 20 A
• 100 W
• 2-Channel
• Single Bay
Configuration:
• 80 V
• 20 A
• 100 W
• 2-Channel
• Single Bay
This MKS Instruments / Astex AX2115 1500 Watt Microwave Power Supply is used and in excellent condition.
This power supply can be used in some of the Tracewell T-Frame VME mainframes.
Part Number: 050-1158-000-PS
Part Number: 050-1158-000-PS
Part Numbers: 183971-03, 183971B-03
Product Family: 6110-01-549-2120, 6110015492120
Product Family: 6110-01-549-2120, 6110015492120
This EADS / Racal 4073 Resistance Module is used and in excellent condition.
Part Number: 33-1040-1200
Options 1 and 2 Installed
• Range 1: 1 KΩ
• Range 2: 10 KΩ
Part Number: 33-1040-1200
Options 1 and 2 Installed
Configuration:
• Range 1: 1 KΩ
• Range 2: 10 KΩ
This MagPowr PS-90 Clutch-Brake Power Supply is used and in excellent condition.
This Astrodyne / RO MK320S-24 Compact 300 Watt Enclosed Switching Power Supply is used and in excellent condition.
MK320S-24 Configuration:
• Output Voltage: 24 VDC
• Output Amps (max): 12.5
• Ripple/Noise pp, typ: 100mv
MK320S-24 Configuration:
• Output Voltage: 24 VDC
• Output Amps (max): 12.5
• Ripple/Noise pp, typ: 100mv
GPIB Option Installed
• Output Voltage = 0-100V
• Output Current = 0-12A
• Output Power = 1200W
• Efficiency: 84%
• Output Voltage = 0-100V
• Output Current = 0-12A
• Output Power = 1200W
• Efficiency: 84%
Part Numbers: 183971-02, 183971B-02
This TDI Power / Transistor Devices SPS5363-1 MP1000-48-20 PSU Module is used and in excellent condition.
Part Number: 09004-129768-1
SPS5363-1 Configuration:
• Output Power: 1000W
• Output Voltage: -54 VDC
• Output Current: 20A at -48 VDC
Part Number: 09004-129768-1
SPS5363-1 Configuration:
• Output Power: 1000W
• Output Voltage: -54 VDC
• Output Current: 20A at -48 VDC
Terminal Block / DC Module sold separately.
Output Ratings at 40°C
• Output voltage: 0 to 20 V
• Output current: 0 to 7.5 A
• Maximum power: 150 W
Output Ratings at 40°C
• Output voltage: 0 to 20 V
• Output current: 0 to 7.5 A
• Maximum power: 150 W
Configuration:
• Output Voltages: +5V, +12V, 12V, 24V
• Adjustment Range: 4.5V to 5.5V, 11.3V to 12.6V, 11.3V to 12.6V, 22.0V to 28.0V
• Output Current: 3.5-40A, 10A, 6A, 3A
• Output Voltages: +5V, +12V, 12V, 24V
• Adjustment Range: 4.5V to 5.5V, 11.3V to 12.6V, 11.3V to 12.6V, 22.0V to 28.0V
• Output Current: 3.5-40A, 10A, 6A, 3A
This Emerson / Astec LPS55 Power Supply is used and in excellent condition.
Configuration:
• Voltage and Current Input/Output: 200-240VAC at 24 Amp, 50/60Hz
• (16) Output Connectors: C13
• Input Connectors: L6-30P
• Voltage and Current Input/Output: 200-240VAC at 24 Amp, 50/60Hz
• (16) Output Connectors: C13
• Input Connectors: L6-30P
This Sencore PR57 AC Powerite Variable Isolation Transformer / Safety Analyzer is used and in good condition.
Input Voltage: 120 VAC Only
Input Voltage: 120 VAC Only
Configuration:
• Total Power: 200-400 W
• Number of Converters: 2
• Input Voltage: 115/230 VAC
• Output Voltage: 28 VDC
• Operating Temperature: 0 to +85 °C
• Storage Temperature: -20 to +100 °C
• Output Power, Vout≥5 VDC: 400 W
• Output Current, Vout<5 VDC: 80 A
Model Number: XTS 15-4
• Output Voltage: 0-15V
• Output Current: 0-4A
• Output Power: 60W
• Internal RS232 Interface Option
• Internal GPIB Interface Option
• Output Voltage: 0-15V
• Output Current: 0-4A
• Output Power: 60W
• Internal RS232 Interface Option
• Internal GPIB Interface Option
This unit is also known as the GE 2375101-11 DPS with CAN Interface Power Supply.
Part Number: 140577-LF
Part Number: 140577-LF
This Parker / Compumotor Gemini GV-U6E / Gemini GV-U6E-NK Digital Servo Drive is used and in excellent condition.
Configuration:
• GV: Basic Drive/Controller
• U6: 120/240 VAC, 6A Peak Continuous Current
• E: Encoder/Hall Feedback
• NK: No Kit
Configuration:
• GV: Basic Drive/Controller
• U6: 120/240 VAC, 6A Peak Continuous Current
• E: Encoder/Hall Feedback
• NK: No Kit
Part Number: 9PA250AV00
Configuration:
• Nominal Voltage: 24 V
• Adjustment Range: 18-29.4 V
• Nominal Voltage: 24 V
• Adjustment Range: 18-29.4 V
Configuration:
• Output Voltage: +5,±15 VDC
• Output Amps: 3,0.5/0.5A
• Output Watts: 30W
• Output Voltage: +5,±15 VDC
• Output Amps: 3,0.5/0.5A
• Output Watts: 30W
• Output Voltage = 0-60V
• Output Current = 0-20A
• Output Power = 1200W
• Efficiency: 86%
• Output Current = 0-20A
• Output Power = 1200W
• Efficiency: 86%
Configuration:
• Total Power: 50-200 W
• Number of Converters: 1
• Input Voltage: 100-120/200-240 VAC
• Output Voltage: 3.3 VDC
• Operating Temperature: 0 to +85 °C
• Storage Temperature: -20 to +100 °C
• Output Power, Vout≥5 VDC: 200 W
• Output Current, Vout<5 VDC: 40 A
Configuration:
• Output Voltage: 0-20 V
• Output Current: 0-10 A
• Max Current: 9 A/8.5 A
• Programming Accuracy Voltage: 10mV
• Programming Accuracy Current: 13 mA
• Output Voltage: 0-20 V
• Output Current: 0-10 A
• Max Current: 9 A/8.5 A
• Programming Accuracy Voltage: 10mV
• Programming Accuracy Current: 13 mA
This Pentair / APW Electronic Solutions PPS-300AC Power Supply is used and in excellent condition.
This TDK-Lambda / Nemic-Lambda ES-9-24 Power Supply is used and in excellent condition.
• Input: 85-132VAC (47-440Hz) or 110-165VDC
• Output: 24V 1.1A
• Output Voltage Adjustment: ± 10%
• Operating Temperature: 0-60°C 100% until 50°C; 70% at 60°C
Configuration:
• Input: 85-132VAC (47-440Hz) or 110-165VDC
• Output: 24V 1.1A
• Output Voltage Adjustment: ± 10%
• Operating Temperature: 0-60°C 100% until 50°C; 70% at 60°C
This Keysight / Agilent N5743A DC System Power Supply is new from surplus stock.
Output Configuration
• Voltage: 12.5 V
• Current: 60 A
• Power: 750 W
Output Configuration
• Voltage: 12.5 V
• Current: 60 A
• Power: 750 W
Installed Options
• Opt 750: Relay Control and DFI/RI
• Opt 750: Relay Control and DFI/RI
Configuration:
• Output Voltage: 24 - (28) V
• Maximum Load with Convection Cooling: 4.5 A
• Maximum Load with 30 CFM Forced Air: 6.2 A
• Output Voltage: 24 - (28) V
• Maximum Load with Convection Cooling: 4.5 A
• Maximum Load with 30 CFM Forced Air: 6.2 A
Configuration:
• Rated Current Amperes: 10.0
• Max Current Amperes: 13.0
• KVA: 1.56
• Output Voltage Range: 0-140
• Meter Range: 2/10 Amps
• Meter Range Volts: 150
• (3) Wire Cord and Receptacle
This Tektronix FH0415 AWG Power Supply is new from surplus stock. The model number on this unit is FH0415.
Input Voltage: 120-240V AC
Input Voltage: 120-240V AC
This Yaskawa / YASNAC CPS-150F Power Supply is used and in excellent condition.
• Input Voltage - 200-230 V AC
• Frequency - 50/60 Hz
• Current - 2.1 A
Configuration:
• Input Voltage - 200-230 V AC
• Frequency - 50/60 Hz
• Current - 2.1 A
Configuration:
• Factory Set Output Voltage: 5 VDC
• Output Voltage Adjustment Range: 4.0-5.5
• OVP Setting: 6.0-6.9 V
• Factory Set Current Limit: 157~175 Amps
Input: 100-240 VAC
Output: 5 VDC
• Factory Set Output Voltage: 5 VDC
• Output Voltage Adjustment Range: 4.0-5.5
• OVP Setting: 6.0-6.9 V
• Factory Set Current Limit: 157~175 Amps
Input: 100-240 VAC
Output: 5 VDC
This Ametek / Xantrex / Soresen XFR 60-46 DC Power Supply is used and in excellent condition.
Model Number: XFR 60-46
• Output Voltage: 0-60 V
• Output Current: 0-46 A
• Output Power: 2760 W
• Input Voltage: 200-240 VAC
View Photo of this unit's output terminals without the cover
Model Number: XFR 60-46
• Output Voltage: 0-60 V
• Output Current: 0-46 A
• Output Power: 2760 W
• Input Voltage: 200-240 VAC
View Photo of this unit's output terminals without the cover
Rackmount chassis.
GPIB Option Installed
• Output Voltage = 0-20V
• Output Current = 0-60A
• Output Power = 1200W
• Efficiency: 81%
GPIB Option Installed
• Output Voltage = 0-20V
• Output Current = 0-60A
• Output Power = 1200W
• Efficiency: 81%
Configuration:
• Output Rail: +5V / +12V / -12V
• Load:
• Rated: 2A / 1.5A / 0.3A
• Peak: 3A / 3A / 0.5A
• Initial Accuracy: +4.95V~+5.05V / +11.4V~+12.6V / -11.0V~-13.0V
• Output Rail: +5V / +12V / -12V
• Load:
• Rated: 2A / 1.5A / 0.3A
• Peak: 3A / 3A / 0.5A
• Initial Accuracy: +4.95V~+5.05V / +11.4V~+12.6V / -11.0V~-13.0V
This Magtrol HD-500-6N Hysteresis Dynamometer is used and in excellent condition.
Configuration:
• Maximum Torque Range: 120.0 oz-in.
• Drag Torque De-Energized at 1000 RPM: 0.5 oz-in
• Nominal Input Inertia, kg-m2: 1.09 x 10-4
• Maximum Power Ratings, Continuous, W: 80
• Maximum Speed, RPM: 25,000
• Brake Cooling Method: Convection
Configuration:
• Maximum Torque Range: 120.0 oz-in.
• Drag Torque De-Energized at 1000 RPM: 0.5 oz-in
• Nominal Input Inertia, kg-m2: 1.09 x 10-4
• Maximum Power Ratings, Continuous, W: 80
• Maximum Speed, RPM: 25,000
• Brake Cooling Method: Convection
Input Voltage: 15W, 120 VAC Only
Output Voltage: 9 VDC, 1A
Part Numbers: AD-091A, DV-91A
Output Voltage: 9 VDC, 1A
Part Numbers: AD-091A, DV-91A
This Jasper Electronics CPCI354-1022-38 350 Watt cPCI Power Supply is used and in excellent condition. The unit is also known as a Kaparel PS3358 350 W AC Power Supply.
Model: PCI354-1022-38, PS3358
PCI354-1022-38 Configuration:
• 38-Pin (Optional, Use with AC Models)
View Photo of rear connector
Part Number(s): 02088-002, 02A000439-A01, 02088-009
Model: PCI354-1022-38, PS3358
PCI354-1022-38 Configuration:
• 38-Pin (Optional, Use with AC Models)
View Photo of rear connector
Part Number(s): 02088-002, 02A000439-A01, 02088-009
Input:
85-250 VAC 47-63 Hz
Or
110-330 VDC
0.9 A Max
Output:
15±5% VDC
Max Ratings:
2 A at 40 degrees Celsius
1.4 A at 50 degrees Celsius
1 A at 60 degrees Celsius
85-250 VAC 47-63 Hz
Or
110-330 VDC
0.9 A Max
Output:
15±5% VDC
Max Ratings:
2 A at 40 degrees Celsius
1.4 A at 50 degrees Celsius
1 A at 60 degrees Celsius
This TDK-Labmda / Nemic-Lambda ZUP10-20/U Programmable Power Supplies is new from surplus stock.
ZUP10-20/U:
• Voltage Range: 0-10 V
• Current Range: 0-20 A
• Max Power: 200 W
• /U Designation: IEC320/USA Power Cable Included
ZUP10-20/U:
• Voltage Range: 0-10 V
• Current Range: 0-20 A
• Max Power: 200 W
• /U Designation: IEC320/USA Power Cable Included
This is also known as Kontron P4180-030512.
Input Voltage: 187- 264 VAC
Output Voltage: +5.1 / +3.3 / +12 / -12 VDC
Part Number: 15.9440.000
Input Voltage: 187- 264 VAC
Output Voltage: +5.1 / +3.3 / +12 / -12 VDC
Part Number: 15.9440.000
This unit ships in the original manufacturer's packaging with standard documentation.
Model Number: XDC 60-200
• Output Voltage: 0-60 V
• Output Current: 0-200 A
• Output Power: 12000 W
Model Number: XDC 60-200
• Output Voltage: 0-60 V
• Output Current: 0-200 A
• Output Power: 12000 W
Rackmount chassis.
• Output Voltage = 0-100V
• Output Current = 0-12A
• Output Power = 1200W
• Efficiency: 84%
• Output Voltage = 0-100V
• Output Current = 0-12A
• Output Power = 1200W
• Efficiency: 84%
Input: 100-240V, 7.2A, 50-60Hz
Output 1: 5V, 50A
Output 2: 3.3V, 60A
Output 3: 12V, 12A
Output 4: -12V, 4A
View Photo rear connector
500 Watt Maximum
Output 1: 5V, 50A
Output 2: 3.3V, 60A
Output 3: 12V, 12A
Output 4: -12V, 4A
View Photo rear connector
500 Watt Maximum
Configuration:
• Option 1A: UE63 / 73PP
• Option 1A: UE63 / 73PP
Configuration:
•Fan Type F: Integral - Standard Fan - Forward Air
•Input Connection: S: Screw Terminals
•Filter Option S: 1.24mA Max Leakage
•Primary Option: None
•Input Voltage: 100-240 VAC
•Voltage Outputs: (2) 5 Volt 25A, (1) 5 Volt 20A, (1) 12 Volt 6A, (1) 12 Volt 10A
Part Number: V401N5H
•Fan Type F: Integral - Standard Fan - Forward Air
•Input Connection: S: Screw Terminals
•Filter Option S: 1.24mA Max Leakage
•Primary Option: None
•Input Voltage: 100-240 VAC
•Voltage Outputs: (2) 5 Volt 25A, (1) 5 Volt 20A, (1) 12 Volt 6A, (1) 12 Volt 10A
Part Number: V401N5H
This Cobham / Aeroflex / IFR 1700-6123-800 is the FM/AM-1200S Communications Service Monitor Power Supply Unit.
This Agilent / HP 6690A System DC Power Supply is used and in excellent condition.
• Input Voltage: 200/208 VAC, 3 Phase, 50/60 Hz
• Output Power: 6670 W
• Output Voltage: 0-15 V
• Output Current: 0-440 A
6690A:
• Input Voltage: 200/208 VAC, 3 Phase, 50/60 Hz
• Output Power: 6670 W
• Output Voltage: 0-15 V
• Output Current: 0-440 A
New Arrivals
Electrical Test
