The 7035 9-Bank Multiplexer Card has nine 1x4 multiplexers. The switch contact configuration for each channel is 2-pole form A. The card's nine banks can be combined for a wide variety of switching configurations using external connections. This flexibility makes the Model 7035 well-suited for production testing of a variety of telecommunications products and systems and low power portable devices.
The Option 01 Smart Card can be installed upon request. They can be purchased here, Item Number: 55192-7. Product Family: 5998-01-505-2862, 5998015052862
This Curtiss-Wright / Systran IP-IROA16CX-64 / BHAS-RELAY16 Form-C Relay IndustryPack Module is used and in excellent condition. Part Numbers: IP-IROA16CX-64, BHAS-RELAY16, B-H-PR-BIR0A16C-64-A1
The RELAY16 is a high density, 16 form C relays, IndustryPack Module. All of the relay channels on the RELAY16 can be changed simultaneously with a single access, which significantly reduces software overhead. This product's modular design provides up to 80 discrete outputs through a single VME slot using the VMESC5 carrier or up to 96 relays through a single PC slot using the ISASC6 carrier. The RELAY16 can also be mixed with other IndustryPack Modules for a more customized, modular I/O system solution.
This unit ships sealed in the manufacturer's static bag. This is also known as the National instruments USB-PDISO8 High-Voltage and Relay Digital I/O USB Device. This is just the circuit board. It does not include any cables or external power supplies. Please contact manufacturer for pricing and availability.
Features of the scanner include a low offset current error (<1pA specified, <30fA typical). The 7158 Low Current Scanner Card includes switching of AC or DC signals up to 100mA. This model provides BNC input and output connectors. Two outputs allow daisy-chaining of Model 7158 cards. This unit is configurable for low current or low voltage switching.
Each channel on the Model 7158 has a pair of single-pole single-throw (SPST), normally open (NO) relays. The relay pair switches signal HI between signal IQ (analog ground) and output HI. Signal LO (outside shell of the BNC) is common to all channels and outputs in the system
Configuration: • (1) 1x96 multiplexer, 2-wire • Mating connectors (see datasheet) can be ordered directly from Racal Instruments, if required.
Part Number: 404944, 404944-S-1530
The Option 01 Smart Card can be installed upon request. They can be purchased here, Item Number: 55192-7. Product Family: 6625-01-408-6029, 6625014086029
This Rohde & Schwarz FMAV VOR/ILS Modulation Analyzer is used and in excellent condition.
Part Number/Order Number: 856.4509.52
Configuration: • Frequency Range: 50kHz to 1360MHz • Frequency Tuning: Automatic or Manual • Resolution: 0.1Hz/1Hz/10Hz/100Hz Selectable • Frequency Error: ±1-Digit+Error of Reference Frequency • External Reference Input/Output: Manual or Remote-Controlled Switchover
This Agilent E1467A 8 x 32 Relay Matrix Switch is used, and in excellent condition. It has the newer-style Agilent terminal block interface with the QUIC rails. The Terminal Block is sold separately.
***Purchase of this unit requires the trade-in of another 1260-22. Please contact Artisan Sales for further details. (A fee will be applied if a 1260-22
is not traded-in.)***
Part Number: 407630
The Option 01 Smart Card can be installed upon request. They can be purchased here, Item Number: 55192-7.
Configuration: • Type: Form A • Electromechanical Relays: 8 • Maximum Output: 120 VDC, 250 VAC • Output Current Rating: 1.5A • Separate Ground Plane per Channel
Part Number: 185151B-02, 185151C-02, 185151D-02L, 777318-421
Configuration: • (1) 1x96 multiplexer, 2-wire • Mating connectors (see datasheet) can be ordered directly from Racal Instruments, if required.
Part Number: 404944-001, 404944-S-1530-001
The Option 01 Smart Card can be installed upon request. They can be purchased here, Item Number: 55192-7. Product Family: 5998-01-439-9310, 5998014399310
Mating connectors (see datasheet) can be ordered directly from Racal Instruments, if required. The Option 01 Smart Card can be installed upon request. They can be purchased here, Item Number: 55192-7.
Part Numbers: 404941, 404941-S-1530, 404941-S-1530, 404941-S-1531, 404941-S-1172
The 7011 Multiplexer Card has four independent banks of 1 x 10, 2-pole channel switching that can be combined for a wide variety of configurations-dual 1 x 20, a 1 x 10 plus 1 x 30, or one large 1 x 40-channel multiplexer. These cards will automatically configure the Model 7001 or 7002 mainframe. Each multiplexer output connects to the 7001/7002 analog backplane through removable jumpers for even greater flexibility.
The Option 01 Smart Card can be installed upon request. They can be purchased here, Item Number: 55192-7. Product Family: 6625-01-475-7087, 6625014757087
Model: 1260-45A Description: Four 4x16 Matrices Part Numbers: 407052-001, 407052-411, 407052-101 An Option 01 or Option 01T Smart Card can be installed upon request. They can be purchased here, Item Number: 55192-7 OR here, Item Number: 55192-9. Product Family: 6625-01-502-6033, 6625015026033, 5998-01-451-5149, 5998014515149
This EADS / Racal 1260-37A Multiplexer Module is used and in excellent condition. The external Crimp connector is not included The Option 01 Smart Card can be installed upon request. They can be purchased here. Item Number: 55192-7.
The 34901A module for the 34970A Data Acquisition/Switch Unit is a general purpose scanning module. It combines dense, multi-function switching with 60 channel/second scan rates to address a broad spectrum of data acquisition applications.
The Option 01 Smart Card can be installed upon request. They can be purchased here, Item Number: 55192-7. Product Family: 6625-01-475-7087, 6625014757087
It has the newer-style Agilent terminal block interface with the QUIC rails. The QUIC Terminal Block is not included. This unit comes with a driver disk and manual.
This Tektronix VX4350 General Purpose Relay Switching Module is used, and in excellent condition. The Option 01 Controller Card can be installed upon request. They can be purchased here, Item Number: 55262-12.
Configuration: • (1) 1x96 multiplexer, 2-wire • Mating connectors (see datasheet) can be ordered directly from Racal Instruments, if required.
Part Number: 404944, 404944-S-1530
The Option 01 Smart Card can be installed upon request. They can be purchased here, Item Number: 55192-7. Product Family: 6625-01-408-6029, 6625014086029
The 7011-C has a 96-pin mass terminated connector. The 7011 Multiplexer Card has four independent banks of 1 x 10, 2-pole channel switching that can be combined for a wide variety of configurations-dual 1 x 20, a 1 x 10 plus 1 x 30, or one large 1 x 40-channel multiplexer. These cards will automatically configure the Model 7001 or 7002 mainframe. Each multiplexer output connects to the 7001/7002 analog backplane through removable jumpers for even greater flexibility.
This EADS / Racal 1260-37 Multiplexer Module is used and in excellent condition. The external IDC connector is not included. The Option 01 Smart Card can be installed upon request. They can be purchased here. Item Number: 55192-7.
The Option 01 Smart Card can be installed upon request. They can be purchased here, Item Number: 55192-7. Product Family: 5895-01-573-4492, 5895015734492
N2261A Configuration: • 40-Channels • Maximum Voltage: 200V • Maximum Current Per Channel: 1 A • Initial Closed Channel Resistance: <0.5Ω • Thermal Offset Per Channel: <3µV • Bandwidth: 10 MHz • Connection Type: T or C • Relay Cycle Counter: Yes
The 7056 is a 10-channel scanner card with electrical connection made through a quick disconnect screw terminal card (Model 7055). It is a cost-effective and versatile solution to relay switching applications. Each channel of the card has two Form A (SPNO) contacts. The switch can be wired for either 2-pole or 1-pole switching through the selection of the appropriate output. In 1-pole operation, channels HI and LO operate as independent, isolated inputs, thereby effectively doubling the number of input channels. In 20 channel mode, use as a one of 20 channel selector switch.
This Tektronix VX4320 RF Switching Module is used, and in excellent condition. The Option 01 Controller Card can be installed upon request. They can be purchased here, Item Number: 55262-12.
This Agilent E2272A Dual 8 x 1 Relay Multiplexer M-Module is used, and in excellent condition. The Agilent E2272A Dual 8 x 1 Relay Multiplexer is a single-wide, register-based M-Module. Use the E2272A as an input or output multiplexer for a matrix or other switching configuration. You can also connect multiple analog signals to a DMM or other instruments.
It consists of 16 DPST latching relays and is organized as two separate 8 x 1 relay multiplexers. This allows the selection of one of eight two-wire signals to connect to one common destination while the other set of eight two-wire signals can be selectively connected to a second destination. By moving a jumper on the module, you configure the E2272A as one 16 x 1 multiplexer.
Logic on the card provides for maskable interrupts (INTC type) once the requested relay movements are complete. The module also has a FIFO for storing up to 8 relay operations. Rapid setup changes can be written to the module and executed with only one interrupt occurrence once the entire group of relay movements is complete.
With each M-Module having its own address within the E2251A M-Module carrier, you have the flexibility to use the M-Modules in many combinations. This flexibility allows you to get the amount of functionality you need in smaller blocks, lowering your overall system costs. Please see the E2251A Technical Specifications for M-Module slot requirements.
Configuration: • Bandwidth: 100 MHz • Number of Channels: Dual 1 x 6 • Impedance: 50 Ω • Max Voltage (ac rms): 42 Vdc, 30 Vac • Max Current: 1 A • Switched Shield: Yes
We have versions A, B and C of the 34504 Multiplexer Module. If a specific version of this board is required, please contact Artisan Technology Group Sales for pricing and availability.
N2261A Configuration: • 40-Channels • Maximum Voltage: 200V • Maximum Current Per Channel: 1 A • Initial Closed Channel Resistance: <0.5Ω • Thermal Offset Per Channel: <3µV • Bandwidth: 10 MHz • Connection Type: T or C • Relay Cycle Counter: Yes
Configuration: • Max Voltage (ac rms): 250 Vdc, 250 Vac • Max Current: 2 A • Number of Channels: 2 • Relay Type: Armature • Thermal Offset: <3µV
Part Number: 34501-66501
We have versions A, B, M, and T of the 34501 Multiplexer Module. If a specific version of this board is required, please contact Artisan Technology Group Sales for pricing and availability.