50 / 29084 Results
Items/Page
National Instruments SCC-RLY01 1-Channel Relay Module
This unit does not include a terminal block.

Part Number: 187397B-01

View National Instruments SC Signal Conditioning Connector Block.(...)

View National Instruments SCC Analog Input/Output Modules.


National Instruments USB-8473 1-Port USB CAN Interface
Configuration:
• Transceiver: TJA1041
• Physical Layer: High-Speed CAN
• Maximum Transfer Rate: 1,000 kb/s

Part Number: 194210C-02, 194210D-02L
National Instruments USB-8476 1-Port USB LIN Interface
Configuration:
• Transceiver: ATA6620
• Physical Layer: LIN
• Maximum Transfer Rate: 20 kb/s

Part Number: 194210D-22L, 194210E-22L
Ametek / VTI Instruments / VXI Technology VM9000 VXI Modular Instrumentation Platform
Modules are sold separately. If you would like a custom configuration contact an Artisan Technology Group Customer Support Specialist for pricing and availability. The front panel slots may vary(...) from those on the pictured unit.

This unit has the newer-style connectors, pictured here.
The mating module connector is pictured here.

Part Number: 70-0071-xxx, 70-0074-xxx, 70-0054-xxx, 70-0056-xxx, 70-0065-xxx

National Instruments SCC-AI03 2-Channel Analog Input Module
This unit does not include a terminal block.

Configuration:

• Voltage: 10V
(...)
• Frequency: 10 kHz

Part Numbers: 186623E-03, 186623C-03, 186623F-03

View National Instruments SC Signal Conditioning Connector Block.
View National Instruments SCC Digital Input/Output Modules.

DDC / North Hills DB30010 Box-Type, Multi-Stub Data Bus Coupler
Configuration:
• Number of Stubs: 3
• Input Imp. (Ohms): 1000
National Instruments FP-RLY-420 Relay Module
Part Number: 185151A-01, 185151B-01, 185151C-01, 185151D-01, 777518-420
Astronics / EADS / Racal Option 01 Smart Card
The smart card is addressed over the VXIbus, and all other modules resident in the VXIbus chassis are controlled by this card. Option 01 uses the local bus on the VXI P2 connector to provide(...) scanning, delay and exclude capabilities. The built-in-test features in the smart card include confidence checking which monitors the state of each relay. It monitors a spare set of contacts or sensing coil current to ensure the switching system configuration is as programmed.

Racal Option 01 Smart Card Datasheet (pdf)
Racal Option 01 Smart Card Manual (pdf)

Part Number: 401901, 401901-005 , 411901-005, 404820

National Instruments SCXI-1349 Adapter Board
Part Number: 182675-01, 182675D-01, 182225-01, 182671B-01, 182671D-01
Ametek / VTI Instruments / VXI Technology VM3616A 16-channel, 16-bit DAC/Waveform Generator
Configuration:
• 16 Independent 16-bit D/A Converters per Instrument for High Speed
(...)
• Arbitrary Waveform Generation with Internal Programmable Clock
• FIFO Mode Allows High-speed Uninterrupted Data Output
• Data Storage and Scan Lists Speed Testing
• Extensive Triggering Capability
• SCPI Compatible

This unit has the newer-style connectors, pictured here.
The mating module connector is pictured here.

Ametek / VTI Instruments / VXI Technology VM3608A / VM3616A Datasheet (pdf)
Ametek / VTI Instruments / VXI Technology VM3608A / VM3616A Manual (pdf)

Part Number: 52-0594-000, 52-0080-001
Product Family: 5998-01-532-6354, 5998015326354

GE / Bently Nevada 330105-02-12-05-02-00 3300 XL 8 mm Reverse Mount Probe, 3/8-24 UNF Threads
Configuration:
• Cable Length: 0.5 m (1.6 ft)
• Connector: Miniature ClickLoc Coaxial
(...)
• Agency Approval: Not Required


National Instruments FP-TB-1 FieldPoint Terminal Base
Configuration:
• Screw Termination Style
• 36 Terminals
(...)
• Universal Terminal Base

Part Number: 184106A-01, 184106B-01, 184106C-01, 777519-01

Ribbon / Performance Technologies CPC7301-11972 Intelligent Shelf Manager (ISM)
Configuration:
• Processor: Intel 80219M600, 600 MHz
• Memory: 128 MB SDRAM
(...)
• Memory: 16 MB Flash
Product Family: 7025-01-616-4586, 7025016164586

Microsemi / Symmetricom / Datum bc635VME Time and Frequency Processor
The J4 connector on the front panel is a 15-pin d-sub connector.

Part Number: 11603
Product Family: 5895-01-441-9630, 5895014419630, 5963-01-406-4552, 5963014064552
National Instruments GPIB-USB-HS Controller for USB
Configuration:
• GPIB HS488: Up to 7230 kbytes/s

Part Number: 187965B-01, 187965H-01L, 187965E-01L
Keysight / Agilent E1411B 5.5-Digit Multimeter
This unit comes with either ejector handles or latching handles. If a specific handle is required, please contact Artisan Technology Group Sales for pricing and availability.
(...)

View Photo of Ejector Style Handle
View Photo of Latching Style Handle

Astronics / EADS / Talon Instruments SR101 Timing Set Module
Configuration
• Requires Firmware Version 1.14 or Later Installed in the SR192

Part Number: 10756-001, 10758
National Instruments USB-8473 1-Port USB CAN Interface
This unit is sealed in the original manufacturer's box.

Configuration:
• Transceiver: TJA1041
(...)
• Physical Layer: High-Speed CAN
• Maximum Transfer Rate: 1,000 kb/s

Part Numbers: 779792-01, 194210D-02L

National Instruments GPIB-USB-HS Controller for USB
Configuration:
(...)
• GPIB HS488: Up to 7230 kbytes/s

Part Number: 187965B-01, 187965D-01, 187965E-01L, 187965D-01L, 187965H-01L, 187965G-01L

Emerson / Motorola MVME6100 VME Single-Board Computer
Configuration: (Similar to MVME6100-0163)
• MPC7457 1.267 GHz Processor
• 128 MB Flash
• 512 MB SDRAM
(...)
• IEEE Handles

Part Number: 01-W3878F 02B, 01-W3878F 02D, 01-W3878F 02F, 01-W3878F 02M, 01-W3878F 02E

National Instruments USB-6008 12-Bit Multifunction DAQ USB Device
USB cable and terminal blocks are not included.

Configuration:
• Input Resolution: 12
(...)
• Max Sampling Rate: 10kS/s
• Analog Outputs: 2
• Output Resolution: 12

Part Number: 191039D-02L, 191039C-02

National Instruments SCC-A10 Voltage Attenuator Module
This unit includes a terminal block.

Part Numbers: 183725C-01, 777459-06

Keithley 7158 Low Current Scanner Card
Features of the scanner include a low offset current error (<1pA specified, <30fA typical). The 7158 Low Current Scanner Card includes switching of AC or DC signals up to 100mA. This model(...) provides BNC input and output connectors. Two outputs allow daisy-chaining of Model 7158 cards. This unit is configurable for low current or low voltage switching.

Each channel on the Model 7158 has a pair of single-pole single-throw (SPST), normally open (NO) relays. The relay pair switches signal HI between signal IQ (analog ground) and output HI. Signal LO (outside shell of the BNC) is common to all channels and outputs in the system

Keithley 7158 Low Current Scanner Card Datasheet (pdf)
Keithley 7158 Low Current Scanner Card Manual (pdf)

Abaco Systems / VMIC VMIACC-5595-208 2 Gb/s Reflective Memory Hub Assembly
Part Number VMIACC-5595-208

• Enclosure: Rack Mount or Desktop
(...)
• Number of Single-Mode (10km) Pluggable Transceivers: 0
• Number of Multimode Pluggable Transceivers: 8

Part Numbers: 350-805595-208E, 350-805595-208H
Product Family: 7035-01-597-0578, 7035015970578, 7035-01-596-3403, 7035015963403

GE / Bently Nevada 330180-91-05 5/8 mm Proximitor Sensor
Probes and Extension Cables are sold separately.

Configuration:
(...)
• Total Length and Mounting Option: 9 Meters System Length, DIN Mount
• Agency Approval Option: Multiple Approvals

The GE / Bently 3300 XL 5/8mm Proximitor Sensor is compatible with all 5 and 8 mm 3300 and 3300 XL probes. The 3300 XL Proximitor Sensor incorporates numerous improvements over previous designs. Its physical packaging allows you to use it in high-density DINrail installations. You can also mount the sensor in a traditional panel mount configuration, where it shares an identical 4-hole mounting "footprint" with older Proximitor Sensor designs. The mounting base for either option provides electrical isolation and eliminates the need for separate isolator plates.

Part Number: 330180-91-05

GE / Bently Nevada 330105-02-12-10-02-05 3300 XL 8 mm Reverse Mount Probe, 3/8 -24 UNF Threads
Configuration:
• Cable Length: 1 m (3.3 feet)
• Connector: Miniature ClickLoc Coaxial
(...)
• Agency Approval: Multiple Approvals


dSPACE DS1104 Research and Development Controller Board
This is the PCI card only. Control panel, cable and software are not included. Please contact manufacturer for pricing and availability.

(...)
Configuration:
• PCI Card Voltage: 5 V Only

Part Number: DS1104-05

Ametek / VTI Instruments / VXI Technology VM6068 4-Channel, High-Performance Serial Interface with Option 1
This unit is also known as VM6068-1.

Configuration:
• Four Independent Channels
• 5 M Baud Data Rates
(...)
• Software Programmable Interface Standards: RS-232, RS-422, RS-423, RS-449, RS-485, V.35 & EIA-530
• Supports UART and HDLC/SDLC Protocols
• SCPI Compatible
• VXI Plug and Play Drivers
• Option 1: 4MB RAM

Part Number: 52-0052-000, 52-0052-001, 52-0576-000

This unit has the newer-style connectors, pictured here.
The mating module connector is pictured here.

Ametek / VTI Instruments / VXI Technology VM6068 Datasheet (pdf)
Ametek / VTI Instruments / VXI Technology VM6068 Manual (pdf)

Microsemi / Symmetricom / Datum bc635PCI-V2 Time and Frequency Processor
This unit has a J2 Mini-DIN front connector.

Operates on both 3.3V and 5V PCI signaling voltages.

Part Number: 560-5920
Product Family: 6695-01-579-6088, 6695015796088
National Instruments PCI-CAN/2 Dual Port CAN Interface
This is a CAN Series 2 card.

Configuration:
• (2) 9-pin D-Sub Connectors
• High Speed CAN
(...)
• Max Transfer Rate 1000 (kb/s)

Part Number: 189063C-02, 189063A-02, 189063G-02

National Instruments PCI-GPIB High-Performance GPIB Interface for PCI
Configuration:

• PCI-GPIB IEEE488.2
(...)
• PCI Interface: 5V Only

Part Numbers: 183617B-01, 183617C-01, 183617E-01, 183617F-01, 183617G-01, 183617G-51, 183617H-01, 183617J-01

GE / Bently Nevada 330105-02-12-05-02-05 3300 XL 8 mm Reverse Mount Probe, 3/8-24 UNF Threads
Configuration:
• Cable Length: 0.5 m (1.6 ft)
• Connector: Miniature ClickLoc Coaxial
(...)
• Agency Approval: Multiple Approvals


Astronics / EADS / Racal CP290-01 1000W Power Supply for 1261B (P/N: 407377-910)
This unit is sealed in the manufacture's box.

Part Numbers: CP290-01, 407377-100, 407377-910
(...)

***Purchase of this unit requires the trade-in of another CP290-01 Power Supply. Please contact Artisan Sales for further details. (A fee will be applied if a CP290-01 is not traded-in.)***

Curtiss-Wright / Systran IP-IROA16CX-64 / BHAS-RELAY16 Form-C Relay IndustryPack Module
This Curtiss-Wright / Systran IP-IROA16CX-64 / BHAS-RELAY16 Form-C Relay IndustryPack Module is used and in excellent condition.
(...)

Part Numbers: IP-IROA16CX-64, BHAS-RELAY16, B-H-PR-BIR0A16C-64-A1

The RELAY16 is a high density, 16 form C relays, IndustryPack Module. All of the relay channels on the RELAY16 can be changed simultaneously with a single access, which significantly reduces software overhead. This product's modular design provides up to 80 discrete outputs through a single VME slot using the VMESC5 carrier or up to 96 relays through a single PC slot using the ISASC6 carrier. The RELAY16 can also be mixed with other IndustryPack Modules for a more customized, modular I/O system solution.

National Instruments VXI-MXI-2 Interface Board
This is a C-Size board.

Part Numbers: 183345A-01, 183345A-02, 183345D-02, 183345D-03, 183345A-03, 183345E-03, 183345F-03, 183345G-03, 183345H-03(...)

Product Family: 5998-01-458-4974, 5998014584974

National Instruments SHC68-68-EPM Extended Performance Digital Cable (2 Meter)
The SHC68-68-EPM is specially designed to work with NI X Series and M Series data acquisition (DAQ) devices. The cable includes separate digital and analog sections, individually shielded twisted(...) pairs for analog inputs, individually shielded analog outputs, and twisted pairs for critical digital I/O. It features a 68-position 0.050 series D-Type connector to 68-position VHDCI connector.

Part Numbers: 192061-02, 192061A-02, 192061B-02, 192061C-02

National Instruments Accessory and Cable Selection Guide (pdf)


Astronics / EADS / Racal 1260-54 1.3 GHz Multiplexer VXI Module
Part Numbers: 404768, 404768-S-1785

The Option 01 Smart Card can be installed upon request. They can be purchased here, Item Number: 55192-7.(...)

Product Family: 5998-01-505-2862, 5998015052862

Keysight / Agilent E1401B High-Power VXI Mainframe Power Supply
This stock-item is for the mainframe power supply only.

Part Numbers: 0950-2283, 22915300

This is the older version of the E1401B Power Supply.
GE / Bently Nevada 330180-51-05 5/8 mm Proximitor Sensor
This unit ships in the original manufacturer's packaging. Probes and Extension Cables are sold separately.

Configuration:
(...)
• Total Length and Mounting Option: 5 Meters System Length, DIN Mount
• Agency Approval Option: Multiple Approvals

The GE / Bently 3300 XL 5/8mm Proximitor Sensor is compatible with all 5 and 8 mm 3300 and 3300 XL probes. The 3300 XL Proximitor Sensor incorporates numerous improvements over previous designs. Its physical packaging allows you to use it in high-density DINrail installations. You can also mount the sensor in a traditional panel mount configuration, where it shares an identical 4-hole mounting "footprint" with older Proximitor Sensor designs. The mounting base for either option provides electrical isolation and eliminates the need for separate isolator plates.

Part Number: 330180-51-05

GE / Bently Nevada 330105-02-12-05-02-05 3300 XL 8 mm Reverse Mount Probe, 3/8 -24 UNF Threads
Configuration:
• Cable Length: 0.5 m (1.6 ft)
• Connector: Miniature ClickLoc Coaxial
(...)
• Agency Approval: Multiple Approvals


Keithley 7035 9-Bank, 1 x 4 Multiplexer Card
The 7035 9-Bank Multiplexer Card has nine 1x4 multiplexers. The switch contact configuration for each channel is 2-pole form A. The card's nine banks can be combined for a wide variety of switching(...) configurations using external connections. This flexibility makes the Model 7035 well-suited for production testing of a variety of telecommunications products and systems and low power portable devices.

Keithley 7035 Manual (pdf)

Molex / Woodhead / SST 5136-PFB-VME Profibus Interface Card
This Molex / Woodhead / SST 5136-PFB-VME Profibus Interface Card is used and in excellent condition.
Keysight / Agilent E1401B High-Power VXI Mainframe Power Supply
This stock-item is for the mainframe power supply only.

Part Numbers: 0950-3704, E1401-69203, 7000119-0000

This is the newer version of the E1401B Power Supply.
Advantech / B&B Electronics 232PTC9 RS-232 Port Combiner
This unit does not include the required external 12 VDC @ 100 mA power supply.
National Instruments PXI-6561 LVDS Digital Waveform Generator / Analyzer
This is a hybrid-slot compatible PXI module that can be used in both PXI Express hybrid slots and standard PXI slots.

Configuration:
• Memory: 16 Mb/Channel DRAM
(...)
• Maximum Data Rate: 200 Mb/s
• Maximum Clock Rate: 100 MHz

Part Number: 191562B-02, 778993-02

Ajax Loader

Loading Next...

Contact Us
Fax:

(240) 376-1381