Items/Page
Showing 1-100 of 191 Results
EigenLight 420 WDM Power Monitor-Attenuator
This EigenLight Model 420 WDM Power Monitor-Attenuator is used and in excellent condition. Optical Interface: SC/APC.

Our Technician Measured: Insertion Loss < 1.0 dBm


Model: 420-21
420: -40 to +20 dBm Power Range

2: Low Polarization Dependence
- Polarization Stability: <0.1 dB
- PDL: <0.1 dB
- Directivity: >20 dB

1: WDM:
- Fiber Type: Single Mode
- Range: 1520 - 1620 nm
- Calibration: 1550 nm

Tektronix OA5012 Optical Attenuator and TM5000 Power Module
This Tektronix OA5012 Optical Attenuator installed in the TM5000 Power Module is used, and in excellent condition.

Fiber Type: multimode, 50/125 µm

Optical Interface: FC/PC

Keysight / Agilent 8156A Opt. 100 Optical Attenuator
Option 100 is the standard performance version with straight optical contact connections (PC).

This instrument includes the standard Agilent optical interface (View Photo). The Agilent 81000xI Series optical interface connectors are sold separately. They are available for purchase from our website here: (Item #50516).

VIAVI Solutions / JDSU MTA 300 Optical Attenuator Cassette
This JDS MTA 300 Optical Attenuator Cassette is used and in excellent condition.

Part Number: MTAS7+1001SU1

Wavelength Range: 1200-1700nm

Optical Interface: SC/APC
Fiber Type: Singlemode

This attenuator is controlled from the front panel keypad or by the GPIB remote interface.The commands are SCPI compatible, and LabVIEW drivers simplify remote control. The individual attenuators are etalon-free for low distortion and feature low polarization dependent loss (PDL) and return loss. Programmable >60dB Attenuation Range. Model: MTA300, MTA 300.

VIAVI Solutions / JDSU / WWG OLA-15B Optical Attenuator
This Wavetek Wandel Goltermann OLA-15B Optical Attenuator is used and in good condition.

Measured Insertion Loss: <3.0 dBm


*This unit comes with the standard Acterna / W&G optical interface as shown here. The JDSU / Acterna / W&G 2060 Universal Test Adapters are sold separately. They can be purchased here.


Yokogawa / Ando AQ8201-31 Optical Attenuator Module
This Yokogawa / Ando AQ8201-31 Optical Attenuator Module is used, and in excellent condition.

Configuration:

• 1-slot Module
• Optical Interface: FC/APC
• Wavelength Range: 1200 to 1600 nm
• Attenuation Range: 0 to 60 dB
• Max Input Power: +23 dBm
• Applicable Fiber: Singlemode 9/125
• Insertion Loss: < 2.5 dB (1310/1550nm)
• Polarization Dependent Loss: 0.05 dBmP-P (1550nm)


Yokogawa / Ando AQ8201-33 L-Band Optical Attenuator Module
This Yokogawa / Ando AQ8201-33 L-Band Optical Attenuator Module is used, and in excellent condition.

Configuration:

• 1-slot Module
• Optical Interface: FC/APC
• Wavelength Range: 1480 to 1650 nm
• Maximum Attenuation: 60 dB
• Maximum Input Power: +23 dBm
• Applicable Fiber: Singlemode 9/125
• Insertion Loss: < 2.5 dB (1550nm)
• Polarization Dependent Loss: 0.05 dBmP-P (1550nm)


VIAVI Solutions / JDSU HA9W1+20KSC1 Programmable Optical Attenuator
Part Number: HA9W1+20KSC1
• Wavelength Range: 750-1700 nm
• Fiber Type: 50/125 µm, Multimode
• Coupler: None
• Return Loss: Standard

• Optical Interface: SC/PC
• Bulkheads on Front

HA9W Configuration
• Attenuation Range: 60 dB
• Analog Return Loss: > 60 dB
• Max Input Power: 200 mW

Using a JDS PS3, this unit was found to perform within the following specifications:
• Insertion Loss: < 3.2 dB


EigenLight 420 WDM Power Monitor-Attenuator
This EigenLight Model 420 WDM Power Monitor-Attenuator is new from surplus stock. This unit includes the mounting bracket. Optical Interface: SC/PC

Measured Insertion Loss: < 1.0 dBm


Model: 420-00
420: -40 to +20 dBm Power Range

0: Standard
- Polarization Stability: <0.2 dB
- PDL: <0.2 dB
- Directivity: >20 dB

0: Standard:
- Fiber Type: Single Mode
- Range: 1280 - 1580 nm
- Calibration: 1310, 1550 nm

VIAVI Solutions / JDSU HA097+20KFP1 Programmable Optical Attenuator
Part Number: HA097+20KFP1
• Wavelength Range: 1200-1700 nm
• Fiber Type: 9/125 µm, Single Mode
• Coupler: None
• Return Loss: Standard

• Optical Interface: FC/PC
• Bulkheads on Front

HA9 Configuration
• Attenuation Range: 100 dB
• Analog Return Loss: > 60 dB
• Max Input Power: 200 mW

Using a JDS PS3, this unit was found to perform within the following specifications:
• Insertion Loss: < 1.5 dB
• Polarization Dependent Loss: < .08 dB


Tektronix OA5002 Optical Attenuator and TM5000 Power Module
This Tektronix OA5002 Optical Attenuator installed in the TM5000 Power Module is used, and in excellent condition.

Fiber Type: singlemode, 9/125 µm

Optical Interface: FC/PC

Exfo FVA-3100-BWEI Variable Attenuator
FVA-3100-BWEI

• Optical Interface: PC*
• Fiber Type: 9/125 µm optimized for spectral flatness

• Wavelength Range: 1200 to 1650 nm
• Measured Insertion Loss: ≤ 1.6 dB at 1550 nm

*This unit comes with the standard Exfo optical interface as shown here. The Exfo Universal Interface (EUI) Connector Adapters are sold separately. They can be purchased here.

Exfo FVA-3100-B91 Variable Attenuator
FVA-3100-B91

• Optical Interface: SC/APC
• Fiber Type: 9/125 µm

• Wavelength Range: 1200 to 1650 nm
• Measured Insertion Loss: 0.5 dB at 1550 nm

VIAVI Solutions / JDSU HA097+20KFA1 Programmable Optical Attenuator
Part Number: HA097+20KFA1
• Wavelenght Range:1200-1700 nm
• Fiber Type: 9/125 µm, Single Mode
• Coupler: None
• Return Loss: Standard

• Optical Interface: FC/APC
• Bulkheads on Front

HA9 Configuration
• Attenuation Range: 100 dB
• Analog Return Loss: > 60 dB
• Max Input Power: 200 mW

Using a JDS PS3, this unit was found to perform within the following specifications:
• Insertion Loss: < 1.5 dB
• Polarization Dependent Loss: < .08 dB


EigenLight 420 WDM Power Monitor-Attenuator
This EigenLight Model 420 WDM Power Monitor-Attenuator is used and in excellent condition. This unit includes the carrying case. Optical Interface: SC/PC

Measured Insertion Loss: < 1.0 dBm

Model: 420-00
420: -40 to +20 dBm Power Range

0: Standard
- Polarization Stability: <0.2 dB
- PDL: <0.2 dB
- Directivity: >20 dB

0: Standard:
- Fiber Type: Single Mode
- Range: 1280 - 1580 nm
- Calibration: 1310, 1550 nm

Exfo FVA-3100-BW91 Variable Attenuator
FVA-3100-BW91

• Optical Interface: SC/PC

• Fiber Type: 9/125 µm optimized for spectral flatness
• Wavelength Range: 1200 to 1650 nm
• Measured Insertion Loss: ≤ 1.0 dB at 1550 nm

Anritsu MN924A Optical Attenuator
This Anritsu MN924A Optical Attenuator is used, and in excellent condition. Optical Interface: FC/PC.

Measured Insertion Loss: ≤ 3.6 dB
VIAVI Solutions / JDSU VA6B Precision Variable Attenuator
This JDS VA6B Precision Variable Attenuator is used, and in excellent condition.

Model: VA6B
Optical Interface: FC/PC
Single-Mode Fiber

Using a JDS PS3,
this unit was found to perform within the following specifications:
• Insertion Loss: < 1.5 dB
• Polarization Dependent Loss: < .08 dB


Exfo IQ-3100-BWEI Variable Attenuator
This Exfo IQ-3100 Variable Attenuator is used, and in excellent condition.

• Part Number: IQ-3100-BWEI
• Wavelength Range: 1200-1650 nm

• Fiber Type: Singlemode 9/125 um
• Insertion Loss: < 1.8 dB
• Optical Interface: PC*

The fully programmable IQ-3100 Variable Attenuator offers reliable and repeatable performance and is ideal for automated BER testing.

Optical system manufacturers know that variable attenuators are essential in order to keep their test systems running smoothly. They look for performance, user-friendliness, complete control of test parameters and advanced programming capability. EXFO's IQ-3100 Variable Attenuator combines innovative design techniques, high-quality components and meticulous calibration procedure. Reliability and repeatable performance. That's what the IQ-3100 offers, in a flexible and fully programmable module. Choose from three attenuation modes: absolute, relative and X+B. Cycle through a repeatable sequence of up to 100 attenuation steps, with a dwell time of up to 1000 hours per step. Add a user-friendly Windows environment, and you've got a first-class variable attenuator.

Exfo IQ-3100 Datasheet (pdf)
Exfo IQ-3100 / IQ-3300 Manual (pdf)

*This unit comes with the standard Exfo optical interface as shown here. The Exfo Universal Interface (EUI) Connector Adapters are sold separately. They can be purchased here.

Keysight / Agilent 8156A Opt. 101 Optical Attenuator
Option 101 is the high performance version with straight optical contact connections (PC).

This instrument includes the standard Agilent optical interface (View Photo). The Agilent 81000xI Series optical interface connectors are sold separately. They are available for purchase from our website here: (Item #50516).

VIAVI Solutions / JDSU HA107+20AFP1 Programmable Optical Attenuator
Part Number: HA107+20AFP1
• Wavelength Range: 1520-1630 nm
• Fiber Type: 9/125 µm, Single Mode
• Coupler: None
• Return Loss: Analog

• Optical Interface: FC/PC
• Bulkheads on Front

HA10 Configuration
• Attenuation Range: 30 dB
• Analog Return Loss: > 60 dB
• Max Input Power: 100 mW

Our Technician Measured, using a JDS PS3:
• Insertion Loss: < 0.5 dB
• Polarization Dependent Loss: < 0.06 dB

Newport PTS-VFOA Variable Fiber Optic Attenuator Module
This Newport PTS-VFOA Variable Fiber Optic Attenuator Module is used, and in excellent condition.
Model Number: VFOA-60-13-XX
Attenuation: 60dB (max)

Wavelength (factory calibration): 1310 nm
Optical Interface: FC/PC or SC/PC (please specify preference when ordering)


Exfo FVA-80-D-32 Singlemode Variable Attenuator
This Exfo FVA-80 Singlemode Variable Attenuator is used and in excellent condition.

Configuration:

• Model: FVA-80-D-32
• Fiber type: Multimode (62.5/125 um)
• Optical Interface: ST/PC
• Calibrated Wavelengths: 850 and 1300 nm

Tektronix OA5002 Optical Attenuator
This Tektronix OA5002 Optical Attenuator is used, and in excellent condition. This unit requires an OA5000 Series Mainframe to operate. Please contact us for pricing and availibility.

Fiber Type: singlemode, 9/125 µm
Optical Interface: FC/PC

VIAVI Solutions / JDSU / WWG OLA-15 Optical Attenuator
This Wavetek Wandel Goltermann OLA-15 Optical Attenuator is used and in good condition.

Measured Insertion Loss: <3.0 dBm


*This unit comes with the standard Acterna / W&G optical interface as shown here. The JDSU / Acterna / W&G 2060 Universal Test Adapters are sold separately. They can be purchased here.


VIAVI Solutions / JDSU HA9503-FAS2 Programmable Optical Attenuator
This is the Highly Configurable Model.

Part Number: HA9503-FAS2
• Fiber Type: Singlemode
• Range: 1200-1700 nm
• Attenuation Range: 0-100 dB

• Optical Interface: FC/APC
• Standard Return Loss: > 45 dB
• Bulkheads on Front Panel
• Max Input Power: 200 mW

Our Technician Measured:
• Insertion Loss: < 2.4 dB
• Polarization Dependent Loss: < 0.05 dB


3M / Photodyne 19XT-062T Optical Attenuator
This 3M / Photodyne 19XT Optical Attenuator is used and in excellent condition. This unit includes an AC adapter. Internal batteries need to be replaced.

Part Number: 19XT-062T

• Attenuation Range: 0-70 dB
• Wavelengths: 850 and 1300 nm
• Fiber Type: Multimode
• Optical Interface: ST/PC

Our Technician Measured:
Insertion Loss: 3.0 dB

Exfo IQS-3100-B-EI Variable Attenuator
Configuration:
• Fiber: 9/125 μm
• Wavelength Range: 1200 to 1650 nm

• Maximum Attenuation: ≥70 dB
• Typical Insertion Loss: 1.1 dB
• Maximum Insertion Loss: 1.8 dB
• Connector Type: *PC

*This unit comes with the standard Exfo optical interface as shown here. The Exfo Universal Interface (EUI) Connector Adapters are sold separately. They can be purchased here.

VIAVI Solutions / JDSU MTA 300 Optical Attenuator Cassette
This JDS MTA 300 Optical Attenuator Cassette is used, and in excellent condition.

Part Number: MTAS7+1001FA1

Wavelength Range: 1200-1700nm

Optical Interface: FC/APC
Fiber Type: Singlemode

This attenuator is controlled from the front panel keypad or by the GPIB remote interface.The commands are SCPI compatible, and LabVIEW drivers simplify remote control. The individual attenuators are etalon-free for low distortion and feature low polarization dependent loss (PDL) and return loss. Programmable >60dB Attenuation Range. Model: MTA300, MTA 300.

Keysight / Agilent 8156A Opt. 350 Optical Attenuator
Option 350 is the multimode version with straight optical contact connections (PC). Fiber Type is 50/125 µm.

This instrument includes the standard Agilent optical interface (View Photo). The Agilent 81000xI Series optical interface connectors are sold separately. They are available for purchase from our website here: (Item #50516).

VIAVI Solutions / JDSU HA097+20KFP1 Programmable Optical Attenuator
Part Number: HA097+20KFP1
• Wavelength Range: 1200-1700 nm
• Fiber Type: 9/125 µm, Single Mode
• Coupler: None
• Return Loss: Standard

• Optical Interface: FC/PC
• Bulkheads on Front

HA9 Configuration
• Attenuation Range: 100 dB
• Analog Return Loss: > 60 dB
• Max Input Power: 200 mW

Using a JDS PS3, this unit was found to perform within the following specifications:
• Insertion Loss: < 2.0 dB
• Polarization Dependent Loss: < .05 dB


VIAVI Solutions / JDSU HA9W2+20KFP2 Programmable Optical Attenuator
Part Number: HA9W2+20KFP2
• Wavelenght Range:750-1700 nm
• Fiber Type: 9/125 µm, Single Mode
• Coupler: None
• Return Loss: Standard

• Optical Interface: FC/PC
• Bulkheads on Back

HA9W Configuration
• Attenuation Range: 60 dB
• Analog Return Loss: > 60 dB
• Max Input Power: 200 mW

Our Technician Measured, using a JDS PS3:
• Insertion Loss: < 3.0 dB


Keysight / Agilent 8156A Opt. 121 Optical Attenuator
Option 121 is the high performance version with monitor output and straight optical contact connections (PC).

This instrument includes the standard Agilent optical interface (View Photo). The Agilent 81000xI Series optical interface connectors are sold separately. They are available for purchase from our website here: (Item #50516).

VIAVI Solutions / JDSU HA9503-SPL2 Programmable Optical Attenuator
This is the Highly Configurable Model.

Part Number: HA9503-SPL2
• Fiber Type: 9/125 um
• Range: 1200-1700 nm
• Attenuation Range: 100 dB

• Standard Output
• Optical Interface: ST/PC
• Analog Return Loss: > 60 dB
• Bulkheads on Front Panel
• Max Input Power: 200 mW

Our Technician Measured, using a JDS PS3:
• Insertion Loss: < 2.0 dB
• Polarization Dependent Loss: < 0.06 dB


VIAVI Solutions / JDSU HA017+20AFA1 Programmable Optical Attenuator
This is the High Resolution Model (0.001 dB).

Part Number: HA017+20AFA1
• Wavelength Range: 1200-1700 nm
• Fiber Type: 9/125 µm, Single Mode

• Coupler: None
• Return Loss: Analog
• Optical Interface: FC/APC
• Bulkheads on Front

HA1 Configuration
• Attenuation Range: 100 dB
• Analog Return Loss: > 60 dB
• Max Input Power: 200 mW

Our Technician Measured:
• Insertion Loss: 1.5 dB
• Polarization Dependent Loss: 0.057 dB


VIAVI Solutions / JDSU HA9W2+20KSC1 Programmable Optical Attenuator
Part Number: HA9W2+20KSC1
• Wavelength Range: 750-1700 nm
• Fiber Type: 62.5/125 µm, Multimode
• Coupler: None
• Return Loss: Standard

• Optical Interface: SC/PC
• Bulkheads on Front

HA9W Configuration
• Attenuation Range: 60 dB
• Analog Return Loss: > 60 dB
• Max Input Power: 200 mW

Our Technician Measured, using a JDS PS3:
• Insertion Loss: < 3.0 dB


VIAVI Solutions / JDSU VA6B Precision Variable Attenuator
This JDS VA6B Precision Variable Attenuator is used and in excellent condition.

Model: VA6B71+AFP0
Fiber Type: 9/125 µm
Optical Interface: FC/HPC

Single-Mode Fiber

Using a JDS PS3, this unit was found to perform within the following specifications:
• Insertion Loss: < 3.5 dB
• Polarization Dependent Loss: < .08 dB


Exfo FVA-60B Variable Optical Attenuator
This Exfo FVA-60B Variable Optical Attenuator is new from surplus stock.

Model: FVA-60B-D-EI

Optical Interface: PC*

Includes:

• 1/8 Inch Stereo Cable to DB-9 Female Connection
• DB-9 Male Serial Connection to DB-25 Female Parallel Connection
• User Manual
• Shockproof Holster
• Shoulder Strap
• Carrying Case

*This unit comes with the standard Exfo optical interface as shown here. The Exfo Universal Interface (EUI) Connector Adapters are sold separately. They can be purchased here.

VIAVI Solutions / JDSU HA097+20AFA1 Programmable Optical Attenuator
Part Number: HA097+20AFA1
• Wavelenght Range:1200-1700 nm
• Fiber Type: 9/125 µm, Single Mode
• Coupler: None
• Return Loss: Analog

• Optical Interface: FC/APC
• Bulkheads on Front

HA9 Configuration
• Attenuation Range: 100 dB
• Analog Return Loss: > 60 dB
• Max Input Power: 200 mW

Our Technician Measured, using a JDS PS3:
• Insertion Loss: < 2.0 dB
• Polarization Dependent Loss: < 0.08 dB


Exfo IQ-3100-B-EI Variable Attenuator
This Exfo IQ-3100 Variable Attenuator is used and in excellent condition.

• Part Number: IQ-3100-B-EI
• Wavelength Range: 1200 to 1650 nm

• Fiber Type: Singlemode 9/125 um
• Insertion Loss: < 1.5 dB
• Optical Interface: PC*

The fully programmable IQ-3100 Variable Attenuator offers reliable and repeatable performance and is ideal for automated BER testing.

Optical system manufacturers know that variable attenuators are essential in order to keep their test systems running smoothly. They look for performance, user-friendliness, complete control of test parameters and advanced programming capability. EXFO's IQ-3100 Variable Attenuator combines innovative design techniques, high-quality components and meticulous calibration procedure. Reliability and repeatable performance. That's what the IQ-3100 offers, in a flexible and fully programmable module. Choose from three attenuation modes: absolute, relative and X+B. Cycle through a repeatable sequence of up to 100 attenuation steps, with a dwell time of up to 1000 hours per step. Add a user-friendly Windows environment, and you've got a first-class variable attenuator.

Exfo IQ-3100 Datasheet (pdf)
Exfo IQ-3100 / IQ-3300 Manual (pdf)

*This unit comes with the standard Exfo optical interface as shown here. The Exfo Universal Interface (EUI) Connector Adapters are sold separately. They can be purchased here.

Exfo FVA-3100-B89 Variable Attenuator
FVA-3100-B89

• Optical Interface: FC/PC
• Fiber Type: 9/125 µm

• Wavelength Range: 1200 to 1650 nm
• Measured Insertion Loss: 1.3 dB at 1550 nm

Exfo FVA-3100-BEI Variable Attenuator
FVA-3100-BEI

• Optical Interface: PC*
• Fiber Type: 9/125 µm singlemode

• Wavelength Range: 1200 to 1650 nm
• Measured Insertion Loss: 0.3 dB at 1550 nm

*This unit comes with the standard Exfo optical interface as shown here. The Exfo Universal Interface (EUI) Connector Adapters are sold separately. They can be purchased here.

VIAVI Solutions / JDSU HA91C+10KFP1 Programmable Optical Attenuator
Part Number: HA91C+10KFP1
• Fiber Type: 50/125 µm, Multimode
• Wavelength Range: 750-1700 nm
• Attenuation Range: 0-100 dB

• Standard Return Loss
• Optical Interface: FC/PC
• Bulkheads on Front Panel
• Max Input Power: 200 mW

Using a JDS PS3, this unit was found to perform within the following specifications:
• Insertion Loss: < 2.2 dB


Exfo IQ-3100-B-EA Variable Attenuator
This Exfo IQ-3100 Variable Attenuator is used and in excellent condition.

• Part Number: IQ-3100-B-EA
• Wavelength Range: 1200 to 1650 nm

• Fiber Type: Singlemode 9/125 um
• Insertion Loss: < 1.5 dB
• Optical Interface: APC*

The fully programmable IQ-3100 Variable Attenuator offers reliable and repeatable performance and is ideal for automated BER testing.

Optical system manufacturers know that variable attenuators are essential in order to keep their test systems running smoothly. They look for performance, user-friendliness, complete control of test parameters and advanced programming capability. EXFO's IQ-3100 Variable Attenuator combines innovative design techniques, high-quality components and meticulous calibration procedure. Reliability and repeatable performance. That's what the IQ-3100 offers, in a flexible and fully programmable module. Choose from three attenuation modes: absolute, relative and X+B. Cycle through a repeatable sequence of up to 100 attenuation steps, with a dwell time of up to 1000 hours per step. Add a user-friendly Windows environment, and you've got a first-class variable attenuator.

Exfo IQ-3100 Datasheet (pdf)
Exfo IQ-3100 / IQ-3300 Manual (pdf)

*This unit comes with the standard Exfo optical interface as shown here. The Exfo Universal Interface (EUI) Connector Adapters are sold separately. They can be purchased here.

EigenLight 410 Power Monitor-Attenuator
This EigenLight Model 410 Power Monitor-Attenuator is used, and in excellent condition. Optical Interface: FC/PC.

Our Technician Measured: Insertion Loss < 1.2 dB
Keysight / Agilent 8157A Optical Attenuator
This Agilent / HP 8157A Optical Attenuator is used and in excellent condition.

Configuration
• 1200 to 1650 nm Wavelength Range

• Our Technician Measured an Insertion Loss of 1.9dB
• Optical Interface: *PC

This instrument includes the standard Agilent optical interface (View Photo). The Agilent 81000xI Series optical interface connectors are sold separately. They are available for purchase from our website here: (Item #50516).

EigenLight 410 Power Monitor-Attenuator
This EigenLight Model 410 Power Monitor-Attenuator is used, and in excellent condition. Optical Interface: SC/APC.

Our Technician Measured: Insertion Loss < 1.4 dBm


Model: 410-00
410: -50 to +16 dBm Power Range

0: Standard
- Polarization Stability: <0.2 dB
- PDL: <0.2 dB
- Directivity: >20 dB

0: Standard
- Fiber Type: Single Mode
- Range: 1280 – 1580 nm
- Calibration: 1310, 1550 nm

Tektronix OA5022 Optical Attenuator and TM5000 Power Module
This Tektronix OA5022 Optical Attenuator installed in the TM5000 Power Module is used, and in excellent condition.

Fiber Type: multimode, 62.5/125 µm

Optical Interface: SC/PC

VIAVI Solutions / JDSU MAPA+23702X0FP MAP Precision Attenuator Module
MAPA+23702X0FP:
• 9/125 Fiber, 1200-1700nm
• Dual Attenuator
• Bulkheads

• FC/PC Optical Interface
• In-Line Power Monitor Option

The Multiple Application Platform (MAP) Precision Attenuator is a high resolution, wide wavelength range attenuator used in applications such as analog systems and high bit-rate digital systems. The attenuator is built on proven industry leading technology for maximum reliability and performance.

Exfo IQ-3100-DEI Variable Attenuator
This Exfo IQ-3100 Variable Attenuator is used and in excellent condition.

• Part Number: IQ-3100-DEI
• Wavelength Range: 700 to 1350 nm

• Fiber Type: Multimode =62.5/125 um
• Insertion Loss: < 2.0 dB
• Optical Interface: PC*

The fully programmable IQ-3100 Variable Attenuator offers reliable and repeatable performance and is ideal for automated BER testing.

Optical system manufacturers know that variable attenuators are essential in order to keep their test systems running smoothly. They look for performance, user-friendliness, complete control of test parameters and advanced programming capability. EXFO's IQ-3100 Variable Attenuator combines innovative design techniques, high-quality components and meticulous calibration procedure. Reliability and repeatable performance. That's what the IQ-3100 offers, in a flexible and fully programmable module. Choose from three attenuation modes: absolute, relative and X+B. Cycle through a repeatable sequence of up to 100 attenuation steps, with a dwell time of up to 1000 hours per step. Add a user-friendly Windows environment, and you've got a first-class variable attenuator.

Exfo IQ-3100 Datasheet (pdf)
Exfo IQ-3100 / IQ-3300 Manual (pdf)

*This unit comes with the standard Exfo optical interface as shown here. The Exfo Universal Interface (EUI) Connector Adapters are sold separately. They can be purchased here.

VIAVI Solutions / JDSU HA017+20AFA4 Programmable Optical Attenuator
This is the High Resolution Model (0.001 dB).

Part Number: HA017+20AFA4
• Wavelength Range: 1200-1700 nm
• Fiber Type: 9/125 µm, Single Mode

• Coupler: None
• Return Loss: Analog
• Optical Interface: FC/APC
• Pigtails on Back Panel

HA1 Configuration
• Attenuation Range: 100 dB
• Analog Return Loss: > 60 dB
• Max Input Power: 200 mW

Our Technician Measured:
• Insertion Loss: <1.5 dB
• Polarization Dependent Loss: <0.05 dB


Exfo FVA-3100-DEI Variable Attenuator
FVA-3100-DEI

• Optical Interface: *PC
• Fiber Type: 62.5/125 µm multimode

• Wavelength Range: 700 to 1350 nm
• Measured Insertion Loss: < 2.0 dB at 1310 nm

*This unit comes with the standard Exfo optical interface as shown here. The Exfo Universal Interface (EUI) Connector Adapters are sold separately. They can be purchased here.

Exfo FVA-60A Variable Optial Attenuator
This Exfo FVA-60A Variable Optical Attenuator is used and in excellent condition. The AC Power Adapter is sold separately.

Model: FVA-60A-B12-RS


Optical Interface: Biconic Interface as shown here.


3M / Photodyne 19XT-062T Optical Attenuator
This 3M / Photodyne 19XT-062T Optical Attenuator is used and in excellent condition. This unit comes with standard accessories and documenation.

Part Number: 19XT-062T

• Attenuation Range: 0-70 dB
• Wavelengths: 850 and 1300 nm
• Fiber Number: 62.5/125 µm, MM
• Connector Type: AT&T ST

Our Technician Measured:
Insertion Loss: < 1.5 dBm

Exfo IQ-3100-B89 Variable Attenuator
This Exfo IQ-3100 Variable Attenuator is used and in excellent condition.

• Part Number: IQ-3100-B89
• Wavelength Range: 1200 to 1650 nm

• Fiber Type: Singlemode 9/125 um
• Insertion Loss: < 0.9 dB
• Optical Interface: FC/PC

The fully programmable IQ-3100 Variable Attenuator offers reliable and repeatable performance and is ideal for automated BER testing.

Optical system manufacturers know that variable attenuators are essential in order to keep their test systems running smoothly. They look for performance, user-friendliness, complete control of test parameters and advanced programming capability. EXFO's IQ-3100 Variable Attenuator combines innovative design techniques, high-quality components and meticulous calibration procedure. Reliability and repeatable performance. That's what the IQ-3100 offers, in a flexible and fully programmable module. Choose from three attenuation modes: absolute, relative and X+B. Cycle through a repeatable sequence of up to 100 attenuation steps, with a dwell time of up to 1000 hours per step. Add a user-friendly Windows environment, and you've got a first-class variable attenuator.

Exfo IQ-3100 Datasheet (pdf)
Exfo IQ-3100 / IQ-3300 Manual (pdf)


Exfo IQ-3100-C-EI Variable Attenuator
This Exfo IQ-3100 Variable Attenuator is used and in excellent condition.

• Part Number: IQ-3100-C-EI
• Wavelength Range: 700 to 1350 nm

• Fiber Type: Multimode 50/125 um
• Insertion Loss: < 2.0 dB
• Optical Interface: PC*

The fully programmable IQ-3100 Variable Attenuator offers reliable and repeatable performance and is ideal for automated BER testing.

Optical system manufacturers know that variable attenuators are essential in order to keep their test systems running smoothly. They look for performance, user-friendliness, complete control of test parameters and advanced programming capability. EXFO's IQ-3100 Variable Attenuator combines innovative design techniques, high-quality components and meticulous calibration procedure. Reliability and repeatable performance. That's what the IQ-3100 offers, in a flexible and fully programmable module. Choose from three attenuation modes: absolute, relative and X+B. Cycle through a repeatable sequence of up to 100 attenuation steps, with a dwell time of up to 1000 hours per step. Add a user-friendly Windows environment, and you've got a first-class variable attenuator.

Exfo IQ-3100 Datasheet (pdf)
Exfo IQ-3100 / IQ-3300 Manual (pdf)

*This unit comes with the standard Exfo optical interface as shown here. The Exfo Universal Interface (EUI) Connector Adapters are sold separately. They can be purchased here.

VIAVI Solutions / JDSU HA9593-FAS2 Programmable Optical Attenuator
This is the Highly Configurable Model.

Part Number: HA9593-FAS2
• Fiber Type: 9/125 um
• Range: 1200-1700 nm
• Attenuation Range: 100 dB

• Split Output: 10/90 Coupler
• Optical Interface: FC/APC
• Standard Return Loss: > 45 dB
• Bulkheads on Front Panel
• Max Input Power: 200 mW


VIAVI Solutions / JDSU HA117+20AFA1 Programmable Optical Attenuator
Part Number: HA117+20AFA1
• Wavelength Range: 1200-1700 nm
• Fiber Type: 9/125 µm, Single Mode
• Coupler: None
• Return Loss: Analog

• Optical Interface: FC/APC
• Bulkheads on Front

HA11 Configuration
• Attenuation Range: 60 dB
• Analog Return Loss: > 60 dB
• Max Input Power: 500 mW

Our Technician Measured, using a JDS PS3:
• Insertion Loss: < 3.1 dB
• Polarization Dependent Loss: < 0.18 dB

OZ Optics DA-100-3A-1550-9/125-S-60 Digital Variable Attenuator
This unit includes accessories.

DA-100-3A-1550-9/125-S-60 Configuration:
• DA-100: DA-100 Series
• 3A: Angled NTT-FC/APC

• 1550: 1550 nm Wavelength
• 9/125: 9/125 micron Fiber Core/Cladding Size
• S: Singlemode Fiber Type
• 60: 60 dB Backreflection Level
• Insertion Loss: 1.4 dB (Measured By Artisan-Scientific Technician)

Accessories:
• Carrying Case
• DB-9 to RJ-11 Adapter
• RJ-11 Cable
• 12 V Switching AC Adapter (Input Voltage 100-240 V)

VIAVI Solutions / JDSU VA6B Precision Variable Attenuator
This JDS VA6B Precision Variable Attenuator is used, and in excellent condition.

Model: VA6B503-SUS
Optical Interface: SC/APC
Single-Mode Fiber
Keysight / Agilent 8157A Optical Attenuator
This Agilent / HP 8157A Optical Attenuator is used and in excellent condition.

Configuration
• 1200 to 1650 nm Wavelength Range

• Our Technician Measured an Insertion Loss of 3.2dB
• Optical Interface: *PC

This instrument includes the standard Agilent optical interface (View Photo). The Agilent 81000xI Series optical interface connectors are sold separately. They are available for purchase from our website here: (Item #50516).

Anritsu MN938A Programmable Optical Attenuator
This Anritsu MN938A Programmable Optical Attenuator is used and in excellent condition.

Optical Interface: FC/PC
Fiber Type: Multimode, 50/125 µm


Our technician measured at 1300 nm:
Insertion Loss: < 1.5 dB

Input Voltage: 120 VAC

Anritsu MN938A Programmable Optical Attenuator
This Anritsu MN938A Programmable Optical Attenuator is used and in excellent condition. The output connector does not include the standard Anritsu dust cap. An Artisan Technology Group provided dust cap will be included. Please see photo for more detail.

Optical Interface: FC/PC
Fiber Type: Multimode, 50/125 µm

Our technician measured at 1300 nm:
Insertion Loss: < 1.2 dB

Input Voltage: 120 VAC

Keysight / Agilent 8156A Opt. 201 Optical Attenuator
Option 201 is the high performance version with angled optical contact connections (APC).

This instrument includes the standard Agilent optical interface (View Photo). The Agilent 81000xI Series optical interface connectors are sold separately. They are available for purchase from our website here: (Item #50516).

VIAVI Solutions / JDSU HA117+20ASC1 Programmable Optical Attenuator
Part Number: HA117+20ASC1
• Wavelength Range: 1200-1700 nm
• Fiber Type: 9/125 µm, Single Mode
• Coupler: None
• Return Loss: Analog

• Optical Interface: SC/PC
• Bulkheads on Front

HA11 Configuration
• Attenuation Range: 60 dB
• Analog Return Loss: > 60 dB
• Max Input Power: 500 mW

Our Technician Measured, using a JDS PS3:
• Insertion Loss: < 2.0 dB
• Polarization Dependent Loss: < 0.08 dB

VIAVI Solutions / JDSU / Fitel VA47K+1KSP20 Manual Variable Optical Attenuator
This JDSU / Fitel VA47K+1KSP20 Manual Variable Optical Attenuator is used and in excellent condition.

VA47K+1KSP20

• Fiber Type (µm): 9/125
• Calibrated Wavelengths (nm): 1300/1550
• Return Loss: Low MM
• Connector Type: ST/HPC
• Port Type: Bulkheads
• Without Carry Case

VIAVI Solutions / JDSU HA9503-FPS2 Programmable Optical Attenuator
This is the Highly Configurable Model.

Part Number: HA9503-FPS2
• Fiber Type: 9/125 um
• Range: 1200-1700 nm
• Attenuation Range: 100 dB

• Split Output: 2/98 Coupler
• Optical Interface: FC/PC
• Standard Return Loss: > 45 dB
• Bulkheads on Front Panel
• Max Input Power: 200 mW

Our Technician Measured, using a JDS PS3:
• Insertion Loss: < 2.5 dB
• Polarization Dependent Loss: < 0.08 dB


VIAVI Solutions / JDSU HA097+20AFP1 Programmable Optical Attenuator
Part Number: HA097+20AFP1
• Wavelength Range: 1200-1700 nm
• Fiber Type: 9/125 μm, Single Mode
• Coupler: None
• Return Loss: Analog

• Optical Interface: FC/PC
• Bulkheads on Front

HA9 Configuration:
• Attenuation Range: 100 dB
• Analog Return Loss: > 60 dB
• Max Input Power: 200 mW

Our Technician Measured:
• Insertion Loss: < 6.4381dB
• Polarization Dependent Loss: <0.1728dB


DiCon FA500 Motorized Fiberoptic Attenuator
This DiCon FA500 Motorized Fiberoptic Attenuator is used and in excellent condition.

Part Number: FA500-13-9-N-P

FA500-13-9-N-P Configuration:

• Calibration Wavelength: 1310nm
• Connector Type: None (Bare Fiber Ends)
• Fiber Type: Single Ended, 9/125 µm

The fiber ends can be connectorized by an Artisan Technology Group Technician. Please contact an Artisan Sales Associate for pricing and availability.

DiCon FA500 Motorized Fiberoptic Attenuator
This DiCon FA500 Motorized Fiberoptic Attenuator is used and in excellent condition.

Part Number: FA500-15-9-N-P

FA500-15-9-N-P Configuration:

• Calibration Wavelength: 1550nm
• Connector Type: None (Bare Fiber Ends)
• Fiber Type: Single Ended, 9/125 µm

The fiber ends can be connectorized by an Artisan Technology Group Technician. Please contact an Artisan Sales Associate for pricing and availability.

Exfo FVA-80-B50-IE Singlemode Variable Attenuator
This Exfo FVA-80 Singlemode Variable Attenuator is used and in excellent condition.

Configuration:

• Model: FVA-80-B50-IE
• Fiber type: Singlemode (9/125 um)
• Optical Interface: FC/PC
• Singlemode Calibrated Wavelengths: 1300 and 1550 nm
• Maximum Attentuation: -65.0 dB
• Maximum Insertion Loss: -3.0 dB
• Typical Insertion Loss: -2.4 dB
• IEEE-488/GPIB Remote Interface

Exfo FVA-3100-BWEA Variable Attenuator
FVA-3100-BWEA

• Optical Interface: APC*

• Fiber Type: 9/125 µm optimized for spectral flatness
• Wavelength Range: 1200 to 1650 nm
• Measured Insertion Loss: ≤ 1.6 dB at 1550 nm

*This unit comes with the standard Exfo optical interface as shown here. The Exfo Universal Interface (EUI) Connector Adapters are sold separately. They can be purchased here.

Exfo FVA-3100-BW91 Variable Attenuator
FVA-3100-BW91

• Optical Interface: SC/PC

• Fiber Type: 9/125 µm optimized for spectral flatness
• Wavelength Range: 1200 to 1650 nm
• Measured Insertion Loss: ≤ 1.9 dB at 1550 nm

VIAVI Solutions / JDSU HA9503-SUL2 Programmable Optical Attenuator
This is the Highly Configurable Model.

Part Number: HA9503-SUL2
• Fiber Type: 9/125 um
• Range: 1200-1700 nm
• Attenuation Range: 100 dB

• Optical Interface: SC/APC
• Standard Return Loss: > 45 dB
• Bulkheads on Front Panel
• Max Input Power: 200 mW

Our Technician Measured, using a JDS PS3:
• Insertion Loss: < 2.0 dB
• Polarization Dependent Loss: < 0.08 dB


VIAVI Solutions / JDSU HA097+24KSC2 Programmable Optical Attenuator
Part Number: HA097+24KSC2
• Wavelenght Range:1200-1700 nm
• Fiber Type: 9/125 µm, Single Mode
• Coupler: 2/98
• Return Loss: Standard

• Optical Interface: SC/PC
• Bulkheads on Back

HA9 Configuration
• Attenuation Range: 100 dB
• Analog Return Loss: > 60 dB
• Max Input Power: 200 mW

Our Technician Measured:
• Insertion Loss: < 2.5 dB
• Polarization Dependent Loss: < 0.08 dB

VIAVI Solutions / JDSU HA97E+10KFP1 Programmable Optical Attenuator
Part Number: HA97E+10KFP1
• Wavelength Range: 1200-1700 nm
• Fiber Type: 9/125 µm, Single Mode
• Coupler: None
• Return Loss: Standard

• Optical Interface: FC/PC
• Bulkheads on Front

HA9 Configuration
• Attenuation Range: 100 dB
• Analog Return Loss: > 60 dB
• Max Input Power: 200 mW

Our Technician Measured:
• Insertion Loss: <1.5 dB
• Polarization Dependent Loss: <0.04 dB


Exfo IQS-3150-B-EI Variable Attenuator
Configuration:
• Fiber: Singlemode 9/125 μm
• Wavelength Range: 1250 to 1650 nm

• Maximum Attenuation:≥65 dB
• Typical Insertion Loss: 1.0 dB
• Maximum Insertion Loss: 1.5 dB
• Connector: *UPC

*This unit comes with the standard Exfo optical interface as shown here. The Exfo Universal Interface (EUI) Connector Adapters are sold separately. They can be purchased here.

Exfo FVA-80-B50-C22-IE Singlemode and Multimode Variable Attenuator
This Exfo FVA-80 Singlemode and Multimode Variable Attenuator is used and in excellent condition. This is two attenuators in one unit. It has a singlemode attenuator and a multimode attenuator installed. Each with independent optical interfaces.

Configuration:

• Model: FVA-80-B50-C22-IE
• Optical Interface: FC/PC
• Fiber type: Singlemode (9/125 um)
• Singlemode Calibrated Wavelengths: 1300 and 1550 nm
Optional 50/125 um Multimode Attenuator Also Installed
• Multimode Calibrated Wavelengths: 850 and 1300 nm
• Insertion Loss (both Singlemode and Multimode): < 2.0 dB
• IEEE-488/GPIB Remote Interface

Keysight / Agilent 8156A Opt. 121 Optical Attenuator
Option 121 is the high performance version with monitor output and straight optical contact connections (PC).

This instrument includes the FC Agilent optical interface (View Photo). The Agilent 81000xI Series optical interface connectors are sold separately. They are available for purchase from our website here: (Item #50516).

VIAVI Solutions / JDSU HA092+20KFA1 Programmable Optical Attenuator
This is the Highly Configurable Model.

Part Number: HA092+20KFA1
• Wavelength Range: 1200-1700 nm
• Fiber Type: 62.5/125 µm, Multimode

• Coupler: None
• Return Loss: Standard
• Optical Interface: FC/PC
• Bulkheads on Front

HA9 Configuration
• Attenuation Range: 100 dB
• Analog Return Loss: > 60 dB
• Max Input Power: 200 mW

Our Technicians Measured:
• IL ≤ 1.1 dB

VIAVI Solutions / JDSU HA9503-FPS2 Programmable Optical Attenuator
This is the Highly Configurable Model.

Part Number: HA9503-FPS2
• Fiber Type: Single Mode
• Range: 1200-1700 nm
• Attenuation Range: 0-100 dB

• Optical Interface: FC/PC
• Standard Return Loss: > 45 dB
• Bulkheads on Front Panel
• Max Input Power: 200 mW

Our Technician Measured:
• Insertion Loss: < 2.0 dB
• Polarization Dependent Loss: < 0.05 dB


VIAVI Solutions / JDSU HA097+24KFP1 Programmable Optical Attenuator
This is the Highly Configurable Model.

Part Number: HA097+24KFP1
• Wavelenght Range:1200-1700 nm
• Fiber Type: 9/125 µm, Single Mode

• Coupler: None
• Return Loss: Standard
• Optical Interface: FC/PC
• Bulkheads on Front

HA9 Configuration
• Attenuation Range: 100 dB
• Analog Return Loss: > 60 dB
• Max Input Power: 200 mW

Our Technician Measured, using a JDS PS3:
• Insertion Loss: < 2.5 dB
• Polarization Dependent Loss: < 0.08 dB


VIAVI Solutions / JDSU HA097+21KFP1 Programmable Optical Attenuator
Part Number: HA097+21KFP1
• Wavelenght Range:1200-1700 nm
• Fiber Type: 9/125 µm, Single Mode
• Coupler: 50/50
• Return Loss: Standard

• Optical Interface: FC/PC
• Bulkheads on Front

HA9 Configuration
• Attenuation Range: 100 dB
• Analog Return Loss: > 60 dB
• Max Input Power: 200 mW

Our Technician Measured, using a JDS PS3:
• Insertion Loss*: < 5.0 dB
• Polarization Dependent Loss: < 0.08 dB

*The 50/50 coupler increases the IL from 1.5 dB to 5.0 dB on each channel.

VIAVI Solutions / JDSU VA6B Precision Variable Attenuator
This JDS VA6B Precision Variable Attenuator is used, and in excellent condition.

Model: VA6B
Fiber Type: 9/125 um
Optical Interface: SC/PC*
Single-Mode Fiber


*This unit can be converted to FC/PC if desired. Please notify Artisan Technology Group sales at time of order.

Using a JDS PS3, this unit was found to perform within the following specifications:
• Insertion Loss: < 3.0 dB
• Polarization Dependent Loss: < .7 dB


VIAVI Solutions / JDSU VA5B Precision Variable Attenuator
This JDS VA5B Precision Variable Attenuator is used and in excellent condition.

Model: VA5B71+1KHP0 Configuration
• Port Type: 5 (pigtails)

• Fiber Type: 9/125 µm
• Wavelemgth: 1550 nm
• Return Loss: Low
• Optical Interface: FC/PC

Tektronix OA5032 Optical Attenuator
This Tektronix OA5032 Optical Attenuator is used and in excellent condition.

Wavelength: 750 to 1600 nm
Fiber Type: 100 µm Multimode
Optical Interface: ST/PC


Our Technicians Measured Insertion Loss: 1.8 dB at 1550 nm

VIAVI Solutions / JDSU VA5B Precision Variable Attenuator
This JDS VA5B Precision Variable Attenuator is used, and in excellent condition.

Model: VA5B505-FAS
Optical Interface: FC/PC
Pigtail connectors. Single-mode fiber
VIAVI Solutions / JDSU HA8503-FOL2 Variable Optical Attenuator
Part Number: HA8503-FOL2
• Fiber Type: 9/125 um, Single Mode
• Range: 1200-1600 nm
• Attenuation Range: 0-100 dB
• Connector Type: FC/PC

• Standard Return Loss: > 45 dB
• Bulkheads on Front Panel

Using a JDS PS3, this unit was found to perform within the following specifications:
• Insertion Loss: < 1.5 dB
• Polarization Dependent Loss: < .08 dB


VIAVI Solutions / JDSU HA1503-FPL2 Programmable Optical Attenuator
Part Number: HA1503-FPL2
• Wavelength Range: 1200-1700 nm
• Fiber Type: 9/125 µm, Single Mode
• Coupler: None
• Return Loss: Not Applicable

• Optical Interface: FC/PC
• Bulkheads on Front Panel

HA1 Configuration
• Attenuation Range: 100 dB
• Analog Return Loss: > 60 dB
• Max Input Power: 200 mW

Our Technician Measured:
• Insertion Loss: <1.5 dB
• Polarization Dependent Loss: <0.05 dB


Exfo IQ-3100-BW89 Variable Attenuator
This Exfo IQ-3100 Variable Attenuator is used and in excellent condition.

• Part Number: IQ-3100-BW89
• Wavelength Range: 1200-1650 nm

• Fiber Type: Singlemode 9/125 µm
• Insertion Loss: < 1.8 dB
• Optical Interface: FC/PC

The fully programmable IQ-3100 Variable Attenuator offers reliable and repeatable performance and is ideal for automated BER testing.

Optical system manufacturers know that variable attenuators are essential in order to keep their test systems running smoothly. They look for performance, user-friendliness, complete control of test parameters and advanced programming capability. EXFO's IQ-3100 Variable Attenuator combines innovative design techniques, high-quality components and meticulous calibration procedure. Reliability and repeatable performance. That's what the IQ-3100 offers, in a flexible and fully programmable module. Choose from three attenuation modes: absolute, relative and X+B. Cycle through a repeatable sequence of up to 100 attenuation steps, with a dwell time of up to 1000 hours per step. Add a user-friendly Windows environment, and you've got a first-class variable attenuator.

Exfo IQ-3100 Datasheet (pdf)
Exfo IQ-3100 / IQ-3300 Manual (pdf)

VIAVI Solutions / JDSU / Fitel VA4503-FPL Manual Variable Optical Attenuator
This JDSU / Fitel VA4503-FPL Manual Variable Optical Attenuator is used and in excellent condition. This unit is missing the plastic molding around the front and rear corners; however, this does not affect functionality.

VA4503-FPL
• Parameter: 1300 / 1550 um
• Attenuation Range: 65/60 dB
• Fiber Type: 9/125
• Connection Type: FC / PC

Our Technicians Measured
• Insertion Loss: < 2.0 dB
• PDL: < .05
• Maximum Attenuation: 42.8 dB

Part Number: VA4503-FPL

Exfo IQS-3150-C-EI Variable Attenuator
Configuration:
• Fiber: Multimode 50/125 μm
• Wavelength Range: 700 to 1350 nm

• Maximum Attenuation:≥60 dB
• Typical Insertion Loss: 1.3 dB
• Maximum Insertion Loss: 2.0 dB
• Connector: *UPC

*This unit comes with the standard Exfo optical interface as shown here. The Exfo Universal Interface (EUI) Connector Adapters are sold separately. They can be purchased here.

VIAVI Solutions / JDSU HA017+29ASC1 Programmable Optical Attenuator
This is the High Resolution Model (0.001 dB).

Part Number: HA017+29ASC1
• Wavelength Range: 1200-1700 nm
• Fiber Type: 9/125 µm, Single Mode

• Coupler: 10/90
• Return Loss: Analog
• Optical Interface: SC/PC
• Bulkheads on Front

HA1 Configuration
• Attenuation Range: 100 dB
• Analog Return Loss: > 60 dB
• Max Input Power: 200 mW

Our Technician Measured:
• Insertion Loss Out 1: <2.3 dB
• Insertion Loss Out 2: <11.4 dB

Exfo IQ-3100-BMEI Variable Attenuator
This Exfo IQ-3100 Variable Attenuator is used and in excellent condition.

• Part Number: IQ-3100-BMEI

• Wavelength Range: 1310 ±40 nm and 1550 ±40 nm
• Fiber Type: Singlemode 9/125 um
• Insertion Loss: < 3.0 dB
• Monitor Output Installed
• Optical Interface: PC*

The fully programmable IQ-3100 Variable Attenuator offers reliable and repeatable performance and is ideal for automated BER testing.

Optical system manufacturers know that variable attenuators are essential in order to keep their test systems running smoothly. They look for performance, user-friendliness, complete control of test parameters and advanced programming capability. EXFO's IQ-3100 Variable Attenuator combines innovative design techniques, high-quality components and meticulous calibration procedure. Reliability and repeatable performance. That's what the IQ-3100 offers, in a flexible and fully programmable module. Choose from three attenuation modes: absolute, relative and X+B. Cycle through a repeatable sequence of up to 100 attenuation steps, with a dwell time of up to 1000 hours per step. Add a user-friendly Windows environment, and you've got a first-class variable attenuator.

Exfo IQ-3100 Datasheet (pdf)
Exfo IQ-3100 / IQ-3300 Manual (pdf)

*This unit comes with the standard Exfo optical interface as shown here. The Exfo Universal Interface (EUI) Connector Adapters are sold separately. They can be purchased here.

VIAVI Solutions / JDSU HA9113-049 Programmable Optical Attenuator
This is the High Resolution Model (0.001 dB).

Part Number: HA9113-049
• Fiber Type: 50/125 µm, Multimode
• Range: 1200-1700 nm

• Attenuation Range: 100 dB
• Standard Output
• Optical Interface: ST/PC
• Analog Return Loss: > 60 dB
• Bulkheads on Back Panel
• Max Input Power: 200 mW
• 50/50 Output Coupler

Our Technician Measured:
• Insertion Loss Out 1: <4.6 dB
• Insertion Loss Out 2: <5.0 dB

VIAVI Solutions / JDSU HA097+29ASC1 Programmable Optical Attenuator
Part Number: HA097+29ASC1
• Wavelength Range: 1200-1700 nm
• Fiber Type: 9/125 µm, Single Mode
• Coupler: None
• Return Loss: Analog

• Optical Interface: SC/PC
• Bulkheads on Front

HA9 Configuration
• Attenuation Range: 100 dB
• Analog Return Loss: > 60 dB
• Max Input Power: 200 mW

Our Technician Measured:
• Insertion Loss Out 1: 0.65 dB
• Insertion Loss Out 2: 9.63 dB

VIAVI Solutions / JDSU HA117+20AFP1 Programmable Optical Attenuator
Part Number: HA117+20AFP1
• Wavelength Range: 1200-1700 nm
• Fiber Type: 9/125 µm, Single Mode
• Coupler: None
• Return Loss: Analog

• Optical Interface: FC/PC
• Bulkheads on Front

HA11 Configuration
• Attenuation Range: 60 dB
• Analog Return Loss: > 60 dB
• Max Input Power: 500 mW

Our Technician Measured, using a JDS PS3:
• Insertion Loss: < 2.5 dB
• Polarization Dependent Loss: < 0.05 dB

VIAVI Solutions / JDSU HA117+20AFP2 Programmable Optical Attenuator
Part Number: HA117+20AFP2
• Wavelength Range: 1200-1700 nm
• Fiber Type: 9/125 µm, Single Mode
• Coupler: None
• Return Loss: Analog

• Optical Interface: FC/PC
• Bulkheads on Back

HA11 Configuration
• Attenuation Range: 60 dB
• Analog Return Loss: > 60 dB
• Max Input Power: 500 mW

Our Technician Measured, using a JDS PS3:
• Insertion Loss: < 2.1 dB
• Polarization Dependent Loss: < 0.05 dB

VIAVI Solutions / JDSU HA9W2+20KFP1 Programmable Optical Attenuator
Part Number: HA9W2+20KFP1
• Wavelength Range: 750-1700 nm
• Fiber Type: 62.5/125 µm, Multimode
• Coupler: None
• Return Loss: Standard

• Optical Interface: FC/PC
• Bulkheads on Front

HA9W Configuration
• Attenuation Range: 60 dB
• Analog Return Loss: > 60 dB
• Max Input Power: 200 mW

Our Technician Measured, using a JDS PS3:
• Insertion Loss: <1.5 dB
• Polarization Dependent Loss: <0.03 dB

VIAVI Solutions / JDSU / Wandel and Goltermann OLA-35 Optical Attenuator
This Wandel & Goltermann / Acterna / JDSU OLA-35 Optical Attenuator is used and in excellent condition.

MK-1 Kit Contains:
• OLA-35 Optical Attenuator

• Optical Interface: *PC
• LNT-1 AC Adapter/Charger
• OLA-35 Manual

*This unit comes with the standard Acterna / W&G optical interface as shown here. The JDSU / Acterna / W&G 2060 Universal Test Adapters are sold separately. They can be purchased here.


Showing 1-100 of 191 Results
Contact Us
Fax:

(240) 376-1381