34 / 34 Results
Items/Page
Newport 744 Butterfly Telecom Laser Diode Mount
This Newport Model 744 Butterfly Telecom Laser Diode Mount is used, and in excellent condition.
Newport 16-Channel COS (Chip on Submount), Laser Diode Drawer
This Newport 16-Channel COS (Chip on Submount), Laser Diode Drawer is used and in excellent condition.
(...)

The Modular, Removable Drawer is designed to hold laser diodes for the purpose of burn-in. Spring loaded "pogo pins" secure each chip-on-submount device to a temperarure-controlled plate and provide electrical connection with the anode and cathode contact pads. These fixtures hold up to sixteen laser diodes. Each fixture has two peltier coolers to control the plate temperature. A large area silicon photodiode measures the optical output of each laser diode. Each channel has a neutral-density filer that is angled 8 degrees to prevent back reflections to the laser diode.

View the Newport Modular, Removable Drawer here and here.

Newport 16-Channel COS (Chip on Submount), Laser Diode Drawer
This Newport 16-Channel COS (Chip on Submount), Laser Diode Drawer is new from surplus stock.
(...)

The Modular, Removable Drawer is designed to hold laser diodes for the purpose of burn-in. Spring loaded "pogo pins" secure each chip-on-submount device to a temperarure-controlled plate and provide electrical connection with the anode and cathode contact pads. These fixtures hold up to sixteen laser diodes. Each fixture has two peltier coolers to control the plate temperature. A large area silicon photodiode measures the optical output of each laser diode. Each channel has a neutral-density filer that is angled 8 degrees to prevent back reflections to the laser diode.

View the Newport Modular, Removable Drawer here and here and here and here.

Newport 8-Channel Butterfly Fixture, Laser Diode Drawer, Water Jacketed with TEC, with Rackmount
This Newport 8-Channel Butterfly Fixture, Laser Diode Drawer, Water Jacketed with TEC, with Rackmount is used, and in excellent condition. This drawer is unique in that it has built in TEC's and it(...) is water jacketed. This laser diode drawer comes with a Newport Model 708 8-Channel Butterfly Telecom Laser Diode Mount. Photodiodes: Hamamatsu S1336-8BK, Si.

Designed For:
• Testing (8) 14-pin Butterfly, Pig-Tail Laser Diode Packages Simultaneously
• Interface to (8) FP3-FH1 Bare Fiber Holders (sold separately)
• (8) User Configured Jumper Blocks for communications with system (sold separately)

There is a picture of the photodiode detectors here and with (8) FP3-FH1 bare fiber holders alinged here and the (8) channel drawer shots here and here and the jumper blocks W/O jumpers here and with jumpers here.

Newport / ILX Lightwave LDM-4984 Laser Diode Mount
This ILX Lightwave LDM-4984 Laser Diode Mount is used and in excellent condition.

Configuration:

(...)
• 14-Pin Butterfly Mount
Option TE-550:
Case Temperature Control Installed

Newport 744 Butterfly Telecom Laser Diode Mount
This Newport Model 744 Butterfly Telecom Laser Diode Mount is used, and in excellent condition. This unit comes standard connectors.

Connectors
(...)
• 15-pin male D-sub, laser temperature control
• 9-pin male D-sub, laser diode current control

Newport / ILX Lightwave LDM-4616 16-Channel Mount Chassis
This ILX Lightwave LDM-4616 16-Channel Mount Chassis is used and in excellent condition. This unit includes a protective chassis covering.

(4) LDM-4604 Modules Installed*(...)

MA-401 Mating Adapter: FC-APC/FC-APC, Wide/Wide keys = N/N = 2.15mm/2.15 mm
Laser Diodes Are Sold Separately

*The LDM-4604 Butterfly Mount Modules (View Photo) can be sold separately. Please contact Artisan Technology Group sales for pricing and availability.

Newport / ILX Lightwave LDM-4982 DIL Laser Mount with Case Temperature Control
This ILX Lightwave LDM-4982 DIL Laser Mount with Case Temperature Control is used and in excellent condition.
Newport 744 Butterfly Telecom Laser Diode Mount
This Newport Model 744 Butterfly Telecom Laser Diode Mount is used, and in excellent condition.
(...)

This unit does not contain the bottom plate of the unit, allowing access to the screw connectors for the Butterfly Laser Diode Mount - (View Photo).

Newport 708 8-Channel Butterfly Telecom Laser Diode Mount
This Newport Model 708 8-Channel Butterfly Telecom Laser Diode Mount is used and in excellent condition.

Model: 708-xx-yy
(...)
• xx: Front panel optical connectors, sold separately. FC and SC connectors are commonly used on these LD mounts. Contact one of our Customer Support Specialists for pricing and availability.
• yy: Laser Diode Pin-Out Code, butterfly fixture jumper block sold separately and available on this page. Contact one of our Customer Support Specialists for pricing and availability.

Newport Model 708 Datasheet (pdf)
Newport Model 708 User Manual (pdf)

Newport Burn-In Drawer Rackmount Kit
This Newport Burn-In Drawer Rackmount Kit is used, and in excellent condition. This drawer is designed to work with the standard Newport Laser Diode Drawers. Connections to the LDD modules are(...) 26-pin high density D-sub. View our pictures section below for more pictures.

View the other side of the unit here.

Newport Burn-In Drawer Rackmount Kit
This Newport Burn-In Drawer Rackmount Kit is used, and in excellent condition. This drawer is designed to work with the standard Newport Laser Diode Drawers. Connections to the LDD modules are(...) 15-pin D-sub. View our pictures section below for more pictures.

View the other side of the unit here.

Newport 16-Channel Butterfly Fixture, Laser Diode Drawer, Water Jacketed with TEC
This Newport 16-Channel Butterfly Fixture, Laser Diode Drawer, Water Jacketed with TEC is used, and in excellent condition. This drawer is unique in that it has built in FC to FC connectors to(...) connect your butterfly packages to FC fiber.

Designed For:
• Testing (16) 14-pin Butterfly, Pig-Tail Laser Diode Packages Simultaneously
• (16) User Configured Jumper Blocks for communications with system (sold separately)

(16) channel drawer shots can be seen here and here.

IDEC MX1A-MK948-1 Laser Displacement Sensor
This IDEC MX1A-MK948-1 Laser Displacement Sensor is used and in excellent condition.

Laser Specifications
• 5mW at 780 nm
Newport 8-Channel Butterfly Fixture, Laser Diode Drawer, Water Jacketed with TEC
This Newport 8-Channel Butterfly Fixture, Laser Diode Drawer (8-CHBF or 8CHBF) is used, and in excellent condition. This drawer is unique in that it has built in TEC's and it is water jacketed. (...) Photodiodes: Hamamatsu S1336-8BK, Si.

Designed For:
• Testing (8) 14-pin Butterfly, Pig-Tail Laser Diode Packages Simultaneously
• Interface to built-in bare fiber holders
• (8) User Configured Jumper Blocks for communications with system (sold separately)

There is a picture of the photodiode detectors here and here.

Newport / ILX Lightwave LDM-4600 Multi-Channel Mount Chassis
This ILX Lightwave LDM-4600 Multi-Channel Mount Chassis is used and in excellent condition. This unit is the Multi-Channel Mount Chassis only and does not include any LDM-4604 Modules. Optical(...) connectors are sold separately.


Newport / ILX Lightwave LDM-4600 Multi-Channel Mount Chassis
This ILX Lightwave LDM-4600 Multi-Channel Mount Chassis is used and in excellent condition. This unit is the Multi-Channel Mount Chassis only and does not include any LDM-4604 Modules. Slide rail(...) rack mounts are included.

MA-401 Mating Adapter: FC-APC/FC-APC, Wide/Wide keys = N/N = 2.15mm/2.15 mm

Newport ULM-TILT Cylindrical Laser Mount
Configuration:
• High-Resolution AJS Adjusters
Newport / ILX Lightwave LDM-4600 8-Channel Mount Chassis
This ILX Lightwave LDM-4600 8-Channel Mount Chassis is used and in excellent condition. This unit includes a protective chassis covering.

(2) LDM-4604 Modules Installed*(...)

Optical Connectors and Laser Diodes Are Sold Separately

*The LDM-4604 Butterfly Mount Modules (View Photo) can be sold separately. Please contact Artisan Technology Group sales for pricing and availability.

Newport / ILX Lightwave LTS-9300 Laser Diode Life-Test and Burn-In System Butterfly Drawer
This ILX Lightwave LTS-9300 Laser Diode Life-Test and Burn-In System Butterfly Drawer is used and in excellent condition. To make this unit complete, a butterfly mount board must be added. See(...) photo of drawer without the butterfly mount board. Please contact manufacturer for pricing and availability.

This unit includes:
• LTS-9300 Drawer without Butterfly Mount Board
• LTS-9300 Laser Diode Driver and Internal Temperature Controller
• Rack Mount Tabs with Fasteners
• Power Cable
• 4 Fans

View Photo of LTS-9300 Drawer without Butterfly Mount Board
View Photo of LTS-9300 Laser Diode Driver and Internal Temperature Controller
View Photo of LTS-9300 Drawer, Open

Newport / ILX Lightwave LTS-9300 Laser Diode Life-Test and Burn-In System Butterfly Drawer
This ILX Lightwave LTS-9300 Laser Diode Life-Test and Burn-In System Butterfly Drawer is used and in excellent condition. To make this unit complete, (16) 14-Pin butterfly mounts must be added. See(...) photo of board without 14-Pin butterfly mounts. Please contact manufacturer for pricing and availability.

This unit includes:
• LTS-9300 Drawer with 16 Butterfly Mount Connectors
• LTS-9300 Laser Diode Driver and Internal Temperature Controller
• Rack Mount Tabs with Fasteners
• Power Cable
• 4 Fans

View Photo of LTS-9300 Drawer Without 14-Pin Butterfly Mounts
View Photo of Internal Butterfly Mount Board
View Photo of LTS-9300 Laser Diode Driver and Internal Temperature Controller
View Photo of LTS-9300 Drawer, Open

Newport 708 8-Channel Butterfly Telecom Laser Diode Mount
This model of the Newport 8 Channel Butterfly Laser Diode Mount is used and in excellent condition.
It has 8 SC/PC optical interface connectors on front.
(...)

It does not have any laser diodes installed.

Newport 708 8-Channel Butterfly Telecom Laser Diode Mount
This model of the Newport 8 Channel Butterfly Laser Diode Mount is used and in excellent condition.
It has 8 FC/APC optical interface connectors on front.
(...)

It does not have any laser diodes installed.

Newport / ILX Lightwave LDM-4600 8-Channel Mount Chassis
This ILX Lightwave LDM-4600 8-Channel Mount Chassis is used and in excellent condition.

(2) LDM-4604 Module Installed*(...)

MA-403 Mating Adapter: FC-APC/FC-APC, Narrow/Narrow keys = R/R = 2.05 mm/2.05 mm
Laser Diodes Are Sold Separately

*The LDM-4604 Butterfly Mount Modules (View Photo) can be sold separately. Please contact Artisan Technology Group sales for pricing and availability.

Newport 708 8-Channel Butterfly Telecom Laser Diode Mount
This Newport Model 708 8-Channel Butterfly Telecom Laser Diode Mount is used and in good condition. This unit has been modified by a previous user: Channel 8 on the front panel has been altered,(...) see photo for more detail.

Model: 708-xx-yy
• xx: Front panel optical connectors, sold separately. FC and SC connectors are commonly used on these LD mounts. Contact one of our Customer Support Specialists for pricing and availability.
• yy: Laser Diode Pin-Out Code, butterfly fixture jumper block sold separately and available on this page. Contact one of our Customer Support Specialists for pricing and availability.

Newport Model 708 Datasheet (pdf)
Newport Model 708 User Manual (pdf)

Newport 8-Channel Butterfly Fixture, Laser Diode Drawer, Water Jacketed with TEC
This Newport 8-Channel Butterfly Fixture, Laser Diode Drawer, Water Jacketed with TEC is used and in excellent condition. This drawer is unique in that it has built in TEC's and it is water(...) jacketed. Photodiodes: Hamamatsu S1336-8BK, Si.

Designed For:
• Testing (8) 14-pin Butterfly, Pig-Tail Laser Diode Packages Simultaneously
• Interface to (8) FP3-FH1 Bare Fiber Holders (sold separately)
• (8) User Configured Jumper Blocks for communications with system (sold separately)

There is a picture of the photodiode detectors here and with (8) FP3-FH1 bare fiber holders aligned here and the (8) channel drawer shots here and here and the jumper blocks W/O jumpers here and with jumpers here.

Newport / ILX Lightwave LDM-4407 Laser Diode Mount
This IXL Lightwave LDM-4407 Laser Diode Mount is used and in excellent condition.
Newport 8-Channel Butterfly Fixture, Laser Diode Drawer, Water Jacketed with TEC
This Newport 8-Channel Butterfly Fixture, Laser Diode Drawer, Water Jacketed with TEC is used, and in excellent condition. This drawer is unique in that it has built in TEC's and it is water(...) jacketed. Photodiodes: OEC GM8HS, Ge.

Designed For:
• Testing (8) 14-pin Butterfly, Pig-Tail Laser Diode Packages Simultaneously
• Interface to (8) FP3-FH1 Bare Fiber Holders (sold separately)
• (8) User Configured Jumper Blocks for communications with system (sold separately)

(8) channel drawer shots can be seen here and here.

Newport 16-Channel COS (Chip on Submount), Laser Diode Drawer
This Newport 16-Channel COS (Chip on Submount), Laser Diode Drawer is used and in good condition. This unit does not include photodiodes or the chip-on-submount laser diode mount board.
(...)

The Modular, Removable Drawer is designed to hold laser diodes for the purpose of burn-in. Spring loaded "pogo pins" secure each chip-on-submount device to a temperarure-controlled plate and provide electrical connection with the anode and cathode contact pads. These fixtures hold up to sixteen laser diodes. Each fixture has two peltier coolers to control the plate temperature. A large area silicon photodiode measures the optical output of each laser diode. Each channel has a neutral-density filer that is angled 8 degrees to prevent back reflections to the laser diode.

View Photo of this unit partially disassembled

Part Number: 9100094060, 7800142020

Newport 16-Channel Butterfly Fixture, Laser Diode Drawer, Water Jacketed with TEC with Rackmount
This Newport 16-Channel Butterfly Fixture, Laser Diode Drawer, Water Jacketed with TEC with Rackmount is used, and in excellent condition. This drawer is unique in that it has built in FC to FC(...) connectors to connect your butterfly packages to FC fiber.

Designed For:
• Testing (16) 14-pin Butterfly, Pig-Tail Laser Diode Packages Simultaneously
• (16) User Configured Jumper Blocks for communications with system (sold separately)

(16) channel drawer shots can be seen here and here.

Newport / ILX Lightwave LDM-4600 4-Channel Mount Chassis
This ILX Lightwave LDM-4600 4-Channel Mount Chassis is used and in excellent condition. This unit includes the Slide Rail Rack Mount.

(1) LDM-4604 Modules Installed*(...)

MA-401 Mating Adapter: FC-APC/FC-APC, Wide/Wide keys = N/N = 2.15mm/2.15 mm
Laser Diodes Are Sold Separately

*The LDM-4604 Butterfly Mount Modules (View Photo) can be sold separately. Please contact Artisan Technology Group sales for pricing and availability.

Newport 16-Channel Butterfly Fixture, Laser Diode Drawer, Water Jacketed with TEC with Rackmount
This Newport 16-Channel Butterfly Fixture, Laser Diode Drawer, Water Jacketed with TEC with Rackmount is used, and in excellent condition. This drawer is unique in that it has built in TEC's.(...)

Designed For:
• Testing (16) 14-pin Butterfly, Pig-Tail Laser Diode Packages Simultaneously
• (16) User Configured Jumper Blocks for communications with system (sold separately)

(16) channel drawer shots can be seen here and here.

Newport 16-Channel COS (Chip on Submount), Laser Diode Drawer
This Newport 16-Channel COS (Chip on Submount), Laser Diode Drawer is used and in excellent condition. This unit does not include the 7800079010 circuit board.
(...)

The Modular, Removable Drawer is designed to hold laser diodes for the purpose of burn-in. Spring loaded "pogo pins" secure each chip-on-submount device to a temperarure-controlled plate and provide electrical connection with the anode and cathode contact pads. These fixtures hold up to sixteen laser diodes. Each fixture has two peltier coolers to control the plate temperature. A large area silicon photodiode measures the optical output of each laser diode. Each channel has a neutral-density filer that is angled 8 degrees to prevent back reflections to the laser diode.

View Photo of this unit partially disassembled.

Ajax Loader

Loading Next...

Contact Us
Fax:

(240) 376-1381