Items/Page
Showing 1-100 of 231 Results
Configuration
• Switch Configuration: 1 x N
• Channel Configuration: 12 Channels

• 9/125 µm Singlemode Fiber
• 70: FC / SPC Connector

Exfo IQ-9100 Datasheet (pdf)
Exfo IQ-9100 Manual (pdf)

This Agilent / HP 86060C 1x8 Lightwave Switch is used and in excellent condition.

The following options are installed:
• 012 - FC/PC Connectors

• 001 - Single Input
• 051 - Connectors on Rear Panel
• 109 - 1280-1650 nm, 9/125 um Single-mode Fiber
• 208 - 8 Connectorized Channels

Our technicans measured at 1550nm:
Channel A1 1xN - <1.0 dB Insertion Loss, <0.05 dB Polarization Dependent Loss

This Agilent / HP 86062C 2x24 Lightwave Optical Switch is used and in excellent condition.

The following options are installed:
• Blocking Configuration

• 002 - Two Input Channels
• 012 - FC Connectors
• 051 - Connectors on Rear Panel
• 109 - 1280-1650nm 9/125um Single Mode
• 224 - 24 Output Channels

Firmware Version: 2.0

Our technicans measured at 1550nm:
Channel A1 1xN - <0.9 dB Insertion Loss, <0.04 dB Polarization Dependent Loss
Channel A2 2xN - <0.9 dB Insertion Loss, <0.04 dB Polarization Dependent Loss

This Newport PTS-FOSW Fiber Optic Switch Module is used, and in excellent condition.
Model Number: FOSW-16-IS-XX
Switch Type: 1x16
Fiber Type: 9/125 SMF

Wavelength Range: 1270-1630 nm
Optical Interface: FC/PC or SC/PC (please specify preference when ordering)


This Newport PTS-FOSW Fiber Optic Switch Module is used, and in excellent condition.
Model Number: FOSW-12-IS-XX
Switch Type: 1x2
Fiber Type: 9/125 SMF

Wavelength Range: 1270-1630 nm
Optical Interface: FC/PC or SC/PC (please specify preference when ordering)


Configuration:

• Option FCI Installed
• Switch type: 1x2 Dual
• Optical Connector: FC/APC

• Wavelength Range: 1270-1650 nm

Our Technician Measured:
• Channel A Insertion Loss: <1.2 dB
• Channel B Insertion Loss: <1.2 dB

This Newport PTS-FOSW Fiber Optic Switch Module is used, and in excellent condition.
Model Number: FOSW-14-IS-XX
Switch Type: 1x4
Fiber Type: 9/125 SMF

Wavelength Range: 1270-1630 nm
Optical Interface: FC/PC or SC/PC (please specify preference when ordering)


Configuration:

• Switch Configuration: 1x2
• Number of Switches: 4
• Fiber Type: 9/125 Singlemode

• Wavelength Range: 1290-1360 nm and 1530-1560 nm
• Adapter Type: SC/PC
• 4 Inputs - 1 per Switch
• 8 Outputs - 2 per Switch

This Agilent / HP 86060C 2x8 Lightwave Switch is used and in excellent condition.

The following options are installed:
• 012 - FC/PC Connectors

• 002 - Dual Input
• 051 - Connectors on Rear Panel
• 109 - 1280-1650 nm, 9/125 um Single-mode Fiber
• 208 - 8 Connectorized Channels

Our technicans measured at 1550nm:
Channel A1 1xN - <0.7 dB Insertion Loss, <0.05 dB Polarization Dependent Loss
Channel A2 2xN - <0.7 dB Insertion Loss, <0.05 dB Polarization Dependent Loss

Configuration
• Switch Configuration: 1 x N
• Channel Configuration: 2 Channels

• Fiber: 9/125 µm Singlemode
• Connector: FC/APC

Exfo IQ-9100 Datasheet (pdf)
Exfo IQ-9100 Manual (pdf)

This Agilent / PXIT SW6U-OPT 32 LC is used, and in excellent condition. 2-slot Card. Optical interface LC. It is a 1x32 Optical Switch. Fiber type: 9/125um Singlemode.
This JDS 1x12 SC Series Fiber Optic Switch is used and in excellent condition.

SC1C10121+27XF000FP

• Input Channels: 1
• Bulkheads on Front
• Output Channels: 12
• 9/125 um Singlemode Fiber
• Standard Return Loss
• Wavelength Range: 1270-1670 nm
• Optical Interface: FC/PC

SB1C10081+27XF000FP

• C Configuration Switch
• 1 Input Channel
• Input Bulkhead on Front

• 8 Output Channels
• Output Bulkheads on Front
• 9/125 µm Fiber Type
• Standard Return Loss
• Wavelength Range 1270-1670 nm
• FC/HPC Connector Type

Configuration:
• Switch Config: 1x24
• Fiber: 9/125 µm Singlemode

• Connector: FC/SPC

The IQ-9100 Optical Switch provides highly accurate and repeatable fiber-to-fiber switching. Designed for minimal reflectance, the switches integrate precision optical components into a compact modular package.

Exfo IQ-9100 Datasheet (pdf)
Exfo IQ-9100 Manual (pdf)

Typical Insertion Loss for the SB series switch with ST/HPC optical connectors is around 1.5 dB.

SB1C10041+17XF000SP

• C Configuration Switch
• 1 Input Channel
• Input Bulkhead Connection(s) on Front
• 4 Output Channels
• Output Bulkhead Connection(s) on Front
• 9/125 Fiber Type
• Standard Return Loss
• Wavelength Range 1270-1670 nm
• ST/HPC Connector Type

This LIGHTech LT 1100 Custom 1x30 Fiber-Optic Switch with Flexcore 1060 single mode fiber (6.2/125) is used, and in excellent condition. Single switch. Operating Wavelength Range: Guaranteed to be wider than 980-1060 nm. Optical Interface: FC/APC. Bulkheads in front. 21 inches deep.

Part Number:
XN130XMSG
X:
Custom Configuration
N:
Optical Switch
1:
1 input channel
30:
30 output channels
X:
Multi Channel Latching
M:
Actuation Mechanism: Motor
S:
Special Order: Corning Flexcore 1060 (6.2/125) Fiber, now known as Corning HI 1060 Fiber
G:
Rack Mount with GPIB
Other features:
Single Mode Fiber, FC/APC, Bulkheads in front

Configuration:
(1) 1x30
Switch 1:
common: COM1, channels: 1-30

Insertion Loss Believe to be ≤ 2 dB (As indicated by previous unit that we had in-stock) - Due to lack of expertise with Flexcore fiber, we cannot guarantee the IL to be ≤ 2 dB. The unit has been priced accordingly.

SB1C10041+17XF000FA

• C Configuration Switch
• 1 Input Channel

• Input Bulkhead Connection on Front
• 4 Output Channels
• Output Bulkhead Connections on Front
• 9/125 Fiber Type
• Standard Return Loss
• Wavelength Range 1270-1670 nm
• FC/APC Connector Type

Configuration:
• Switch Config: 1x4 Switch
• Fiber: 9/125 µm Singlemode

• Connector: FC/PC

The IQ-9100 Optical Switch provides highly accurate and repeatable fiber-to-fiber switching. Designed for minimal reflectance, the switches integrate precision optical components into a compact modular package.

Exfo IQ-9100 Datasheet (pdf)
Exfo IQ-9100 Manual (pdf)

MAPS+1K70108LILC:
• 9/125 Fiber, 1270-1670 nm
• (1) 1x8 Switch
• Latching
• Bulkheads

• LC/PC Optical Interface

The Multiple Application Platform (MAP) Large Channel Count Switch Cassette is bidirectional and allows the connection of a common port to any number of channels up to 50. The cassette is available in single or dual-switch configurations.

The MAP switch cassette is based on JDSU expanded beam and alignment technologies and exhibits low insertion loss (IL) and high return loss (RL).

This JDSU SG08082+17F000SU 7x8 SG Series Optical Switch is used and in good condition. This unit is configured as an 8-input / 8-output system however, the M1 input channel does not connect to any outputs. All other channels work as intended.

Model: SG08082+17F000SU
• 7 Input Channels
• 8 Output Channels
• Bulkheads on Back
• 9/125 µm Single Mode Fiber
• Wavelength Range: 1270-1670 nm
• Optical Interface: SC/APC


This JDS 1x32 SC Series Fiber Optic Switch is used and in excellent condition.

SC1C10322+27AF000FP

• Input Channels: 1
• Bulkheads on Front and Back
• Output Channels: 32
• 9/125 µm Singlemode Fiber
• Analog Return Loss
• Wavelength Range: 1270-1670 nm
• Optical Interface: FC/PC

View the rear side of this unit here.

This Agilent / PXIT SW6U-OPT32-M5-LC is used, and in excellent condition. 2-slot Card. Optical interface LC. It is a 1x32 Optical Switch. Fiber type: 50/125um Multimode.
This Agilent / PXIT SW6U-OPT4-MM+SM-M5/S9 Card is used, and in excellent condition. 1-slot Card. It is a dual 1x4 optical switch and is configured as follows:

CH1: 1x4 50/125um Multimode SC/PC
CH2: 1x4 9/125um Singlemode SC/APC

This Agilent / HP 86060C 1x8 Lightwave Switch is used and in excellent condition.

The following options are installed:
• 012 - FC/PC Connectors

• 001 - Single Input
• 051 - Connectors on Rear Panel
• 109 - 1280-1650 nm, 9/125 um Single-mode Fiber
• 208 - 8 Connectorized Channels

Our technicans measured at 1550nm:
Channel A1 1xN - <1 dB Insertion Loss, <0.05 dB Polarization Dependent Loss

MAPS-1W73241LC:
• 9/125 Fiber, 1310/1550 nm
• (2) 1x4 Switches
• Non-Latching
• Bulkheads

• LC/PC Optical Interface

The Multiple Application Platform (MAP) Small Channel Count Switch is a single width cassette that is able to accommodate a number of switches with varying channel counts.

The switch redirects input light by an optical prism or mirror into a selected output channel. The switch is bidirectional, transparent to signal format, available in both single-mode (SM) and multimode (MM) versions.

This JDS 1x8 SC Series Fiber Optic Switch is used and in excellent condition.

SC1C20082+12XF000FP

• Input Channels: 1
• Bulkheads on Back
• Output Channels: 8
• 62.5/125 µm Multimode Fiber
• Standard Return Loss
• Optical Interface: FC/PC

This DiCon GP700 Optical Switch 1x100 is used and in excellent condition. Rackmount chassis.

Inputs: 1
Outputs: 100
Optical Interface: ST/PC

Fiber Type: Singlemode 9/125 um

Our Technician Measured:
All channels have: IL <2.0 dB and PDL <0.08 dB
Most channels have: IL <1.2 dB and PDL <0.05 dB

SB1C10081+17XF000FP

• C Configuration Switch
• 1 Input Channel

• Input Bulkhead Connection(s) on Front
• 8 Output Channels
• Output Bulkhead Connection(s) on Front
• 9/125 Fiber Type
• Standard Return Loss
• Wavelength Range 1270-1670 nm
• FC/HPC Connector Type

This JDS 1x100 SC Series Fiber Optic Switch is used and in excellent condition.

SC01100-Z000191

• Input Channels: 1
• Bulkheads on Front
• Output Channels: 100
• 62.5/125 µm Multimode Fiber
• Standard Return Loss
• Optical Interface: SC/PC

This JDSU SC4E10321+27XF000SU 4x32 SC Series Fiber Optic Switch is used and in excellent condition.

SC4E10321+27XF000SU

• 4 Input Channels, E Config.
• Input Bulkheads on Front
• 32 Output Channels
• Output Bulkheads on Front
• Fiber Type: 9/125 µm
• Standard Return Loss
• Wavelength Range (nm): 1270-1670
• No Cable Length; Bulkheads Only
• SC/APC Connector Type
• Singlemode Fiber

Configuration
• Switch Configuration: 1 x N
• Channel Configuration: 4 Channels

• Fiber: 9/125 µm Singlemode
• Connector: FC/APC

Exfo IQ-9100 Datasheet (pdf)
Exfo IQ-9100 Manual (pdf)

MAPS-1W73221FP:
• 9/125 Fiber, 1310/1550 nm
• (2) 1x2 Switches
• Non-Latching
• Bulkheads

• FP/PC Optical Interface

The Multiple Application Platform (MAP) Small Channel Count Switch is a single width cassette that is able to accommodate a number of switches with varying channel counts.

The switch redirects input light by an optical prism or mirror into a selected output channel. The switch is bidirectional, transparent to signal format, available in both single-mode (SM) and multimode (MM) versions.

Option 009: FC/APC Optical Connector, 1x2 Switch, 9/125 µm Single Mode Fiber.

Our technician measured this units insertion loss: < 0.3 dB


Part Number: ATO-30551

This JDS 1x64 SC Series Fiber Optic Switch is used and in excellent condition.

SC1C10641+27AF000SC

• Input Channels: 1
• Bulkheads on Front
• Output Channels: 64
• 9/125 µm Singlemode Fiber
• Analog Return Loss
• Wavelength Range: 1270-1670 nm
• Optical Interface: SC/PC

(1) Input and (4) Outputs. Fiber Type: singlemode, 9/125 um. Optical Interface: FC/APC. Wavelength Range: 1290-1650 nm. Max Input Power: +24.0 dBm.

Our Technician measured:

Insertion Loss: < 1.7 dB
Polarization Dependent Loss: < 0.05 dB
Max Power: 24.0 dBm

This JDSU SC2E40084+27XF003SU 2X8 SC Series Switch Fiber Optic Switch is used and in excellent condition.

SC2E40084+27XF003SU

• Input Channels: 2
• Switch Configuration: E
• Pigtails on Back
• Output Channels: 8
• 9/125 µm Singlemode Fiber
• Wavelength Range: 1270-1670 nm
• Optical Interface: SC/APC
• Insertion Loss: < .4 dB as Measured by Artisan Scientific Technicans

The following options are installed:
001 - One Input Channel
012 - FC/PC Connectors
051 - Connectors on Rear Panel
109 - 1280-1650nm 9/125um Single Mode

204 - 4 Output Channels

This Agilent / HP 86062C 2x40 Lightwave Optical Switch is used and in excellent condition.

The following options are installed:
• 002 - Two Input Channels

• 012 - FC / PC Connectors
• 051 - Connectors on Rear Panel
• 240 - 40 Outputs
• H62 - 1250 to 1650nm, 62.5 / 125µm Multimode Fiber
• This unit also has Option C08

Our technicans measured at 1550nm:
Channel A1 1xN - <0.6 dB Insertion Loss, <0.05 dB Polarization Dependent Loss
Channel A2 2xN - <0.6 dB Insertion Loss, <0.05 dB Polarization Dependent Loss

SB2E10041+27XF000FP

• E Configuration Switch
• 2 Input Channel

• Input Bulkhead Connection(s) on Front
• 4 Output Channels
• Output Bulkhead Connection(s) on Front
• 9/125 µm Singlemode Fiber Type
• Standard Return Loss
• Wavelength Range 1270-1670 nm
• FC/PC Connector Type

This Agilent / PXIT SW6U-OPT 3 APC is used, and in excellent condition. 1-slot Card. Optical interface FC/APC. It has 3 SPDT (1x2) Optical Switches. Fiber type: 9/125um Singlemode.
This Yokogawa / Ando AQ3540(01) 1x16 Optical Channel Selector is used and in excellent condition.

Configurations:
• Optical Interface: FC/PC

• Fiber Type: Singlemode, 9/125 um
• Wavelength Range: 1200-1650 nm

Our Technician Measured:
• Insertion Loss: <1.2 dB

This DiCon GP700 Optical Switch with Dual Synchronous Duplex 1x12 is used and in excellent condition. Rackmount chassis.

Dual Synchronous Duplex 1x12 Switches:
Total Inputs: 4

Total Outputs: 48
Optical Interface: SC/PC
Fiber Type: Singlemode 9/125 um

Our Technician Measured:
All channels have: IL <3.0 dB and PDL <0.3 dB
Most channels have: IL <2.0 dB and PDL <0.2 dB

SB2E10081+27AF000FA

• E Configuration Switch
• 2 Input Channel

• Input Bulkhead Connection(s) on Front
• 8 Output Channels
• Output Bulkhead Connection(s) on Front
• 9/125 Fiber Type
• Wavelength Range 1270-1670 nm
• FC/APC Connector Type

SB10B5-E2FA

• E Configuration Switch
• 2 Input Channels

• Input Bulkhead Connections on Front
• 10 Output Channels
• Output Bulkhead Connections on Front
• 9/125 Fiber Type
• Standard Return Loss
• Wavelength Range 1270-1670 nm
• FC/APC Connector Type

This Agilent / HP 86060C 1x8 Lightwave Switch is used and in good condition. This unit has a cracked display, this does not affect the functionality of the unit.

View Photo of display.

The following options are installed:
• 012 - FC/PC Connectors
• 001 - Single Input
• 051 - Connectors on Rear Panel
• 109 - 1280-1650 nm, 9/125 um Single-mode Fiber
• 208 - 8 Connectorized Channels

Our technicans measured at 1550nm:
Channel A1 1xN - <1.0 dB Insertion Loss, <0.05 dB Polarization Dependent Loss

SB1C10081+27XF000SP

• Single Mode Switch
• 1 Input Channel

• Input Bulkhead Connection(s) on Front
• 8 Output Channels
• Output Bulkhead Connection(s) on Front
• 9/125 Fiber Type
• Standard Return Loss
• Wavelength Range 1270-1670 nm
• ST/PC Connector Type

SB1C10121+17XF000FA

• C Configuration Switch
• 1 Input Channel
• Input Bulkhead Connection on Front

• 12 Output Channels
• Output Bulkhead Connections on Front
• 9/125 Fiber Type
• Standard Return Loss
• Wavelength Range 1270-1670 nm
• FC/APC Connector Type

SB0116-Z000412

• 1 Input Channel
• Input Bulkhead Connection(s) on Front

• 16 Output Channels
• Output Bulkhead Connection(s) on Front
• Standard Return Loss
• FC/APC Connector Type

SB08B5-D2SC

• D Configuration Switch
• 2 Input Channel

• Input Bulkhead Connection(s) on Front
• 8 Output Channels
• Output Bulkhead Connection(s) on Front
• 9/125 Fiber Type
• Standard Return Loss
• Wavelength Range 1270-1670 nm
• SC/PC Connector Type

This Anritsu MN9672A 2x8 Optical Channel Selector is used, and in excellent condition. Includes front panel cover plate. Optical Interface: FC/PC.

Our Technician, using a JDS PS3, measured: <1.8 dB IL & <0.03 dB PDL for both channels

The following options are installed:
002 - Two Input Channels
012 - FC/PC Connectors
051 - Connectors on Rear Panel
163 - 750–1350nm, 62.5/125 µm Multimode Fiber

216 - 16 Output Channels

SB1C10161+27XF000FP

• C Configuration Switch
• 1 Input Channel

• Input Bulkhead Connection(s) on Front
• 16 Output Channels
• Output Bulkhead Connection(s) on Front
• 9/125 Fiber Type
• Standard Return Loss
• Wavelength Range 1270-1670 nm
• FC/HPC Connector Type

This LIGHTech LT1100 Custom 1x30 Fiber-Optic Switch with Flexcore 1060 single mode fiber (6.2/125) is used being sold as-is. Single switch. Operating Wavelength Range: Guaranteed to be wider than 980-1060 nm. Optical Interface: FC/APC. Bulkheads in front. 21 inches deep.

Due to the lack or expertise with Flexcore 1060 fiber, our engineers could not get a valid IL measurement. The Insertion Loss was measured with a 1558 nm source and 8/125 Polarization Maintaining Fiber (PMF): Insertion Loss that Varies Depending on Channel: From 4.3 dB To 17.4 dB.

Part Number:
XN130XMSG
X:
Custom Configuration
N:
Optical Switch
1:
1 input channel
22:
24 output connectors, 22 output channels (Channel 5 and 22 are not connected internally)
X:
Multi Channel Latching
M:
Actuation Mechanism: Motor
S:
Special Order: Corning Flexcore 1060 (6.2/125) Fiber, now known as Corning HI 1060 Fiber
G:
Rack Mount with GPIB
Other features:
Single Mode Fiber, FC/APC, Bulkheads in front

Configuration:
(1) 1x22
Switch 1:
common: COM1, channels: 1-22

This Agilent / HP 86062C 2x80 Lightwave Optical Switch is used and in excellent condition.

The following options are installed:
• 002 - Two Input Channels

• 012 - FC/PC Connectors
• 051 - Connectors on Rear Panel
• 109 - 1280-1650nm 9/125µm Single Mode
• 280 - 80 Output Channels

Configuration
• Switch Configuration: 1 x N
• Channel Configuration: 8 Channels

• Fiber: 9/125 µm Singlemode
• Connector: FC/APC

Exfo IQ-9100 Datasheet (pdf)
Exfo IQ-9100 Manual (pdf)

Configuration:
• Switch Config: 1x12 Switch
• Fiber: 9/125 µm Singlemode

• Connector: FC/APC

The IQ-9100 Optical Switch provides highly accurate and repeatable fiber-to-fiber switching. Designed for minimal reflectance, the switches integrate precision optical components into a compact modular package.

Exfo IQ-9100 Datasheet (pdf)
Exfo IQ-9100 Manual (pdf)

Configuration
• Switch Configuration: 1 x N
• Channel Configuration: 2 Channels

• Fiber: 9/125 µm Singlemode
• Connector: FC/SPC

Exfo IQ-9100 Datasheet (pdf)
Exfo IQ-9100 Manual (pdf)

This Agilent / PXIT SW6U-OPT 4 APC is used, and in excellent condition. 1-slot Card. Optical interface FC/APC. It has Dual 1x4 Optical Switches. Fiber type: 9/125um Singlemode.
This Agilent / HP 86062C 2x20 Lightwave Optical Switch is used and in excellent condition.

The following options are installed:
• 002 - Two Input Channels

• 012 - FC Connectors
• 051 - Connectors on Rear Panel
• 109 - 1280-1650nm 9/125um Single Mode
• 220 - 20 Output Channels

Our technicans measured at 1550nm:
Channel A1 1xN - <0.8 dB Insertion Loss, <0.04 dB Polarization Dependent Loss
Channel A2 2xN - <0.8 dB Insertion Loss, <0.04 dB Polarization Dependent Loss

SB2D10081+17XF000FP

• D Configuration Switch
• 2 Input Channels

• Input Bulkhead Connection(s) on Front
• 8 Output Channels
• Output Bulkhead Connection(s) on Front
• 9/125 Fiber Type
• Wavelength Range 1270-1670 nm
• FC/HPC Connector Type

This Keysight / Agilent 86060C 2x4 Lightwave Switch is used and in excellent condition.

The following options are installed:
• 002 - Two Input Channels

• 012 - FC/PC Connector
• 051 - Connectors on Rear Panel
• 109 - 1280-1650 nm, 9/125 um Single-mode Fiber
• 204 - 4 Connectorized Channels

Our technicans measured at 1550nm:
Channel A1 1xN - <0.8 dB Insertion Loss, <0.04 dB Polarization Dependent Loss
Channel A2 1xN - <0.8 dB Insertion Loss, <0.04 dB Polarization Dependent Loss

MAPS+1K70204N1FP:
• 9/125 Fiber, 1310/1550 nm
• (2) 1x4 Switches
• Bulkheads

• Connector Type: FC/PC

The Multiple Application Platform (MAP) Small Channel Count Switch is a single width cassette that is able to accommodate a number of switches with varying channel counts.

The switch redirects input light by an optical prism or mirror into a selected output channel. The switch is bidirectional, transparent to signal format, available in both single-mode (SM) and multimode (MM) versions.

This JDS Uniphase SG02162+17F000FP 2x16 SG Series Optical Switch is used, and in excellent condition.

Model: SG02162+17F000FP
• 2 Input Channels

• 16 Output Channels
• Bulkheads on Back
• 9/125 um SM Fiber
• Wavelength Range: 1270-1670 nm
• Optical Interface: FC/PC


SB1C10041+27AF000FA

• C Configuration Switch
• 1 Input Channel

• Input Bulkhead Connection(s) on Front
• 4 Output Channels
• Output Bulkhead Connection(s) on Front
• 9/125 Fiber Type
• Analog Return Loss
• Wavelength Range 1270-1670 nm
• FC/APC Connector Type

This Agilent / HP 86060C 2x4 Lightwave Switch is used and in excellent condition.

The following options are installed:
• 002: Two Input Channels

• 012: FC/PC Connectors
• 050: Connectors on Front Panel
• 109: 1280-1650 nm, 9/125 µm Single-Mode Fiber
• 204: Four Connectorized Output Channels

Our technicans measured at 1550nm:
Channel A1 1xN - <0.7 dB Insertion Loss, <0.05 dB Polarization Dependent Loss
Channel A2 1xN - <0.7 dB Insertion Loss, <0.05 dB Polarization Dependent Loss

SB1C10081+22XB000FP

• C Configuration Switch
• 1 Input Channel
• Input Bulkhead on Front

• 8 Output Channels
• Output Bulkheads on Front
• 62.5/125 µm Fiber Type
• Standard Return Loss
• Wavelength Range 750-940 nm
• FC/HPC Connector Type

This Agilent / HP 86060C 2x6 Lightwave Switch is used and in excellent condition.

The following options are installed:
• 012 - FC/PC Connectors

• 002 - Dual Input
• 051 - Connectors on Rear Panel
• 109 - 1280-1650 nm, 9/125 um Single-mode Fiber
• 206 - 6 Connectorized Channels

Our technicans measured at 1550nm:
Channel A1 1xN - <0.7 dB Insertion Loss, <0.03 dB Polarization Dependent Loss
Channel A2 2xN - <0.7 dB Insertion Loss, <0.03 dB Polarization Dependent Loss

This Polatis / Continuum Photonics IG-1600-2R-ST-DC-MTP Direct Light Optical Back Plane is used and in excellent condition. This is the 16 port configuration.

Optical Interface: MTP
This LIGHTech LT3000 Fiber-Optic Switch with (4) independent switches and single mode fiber (9/125) is used, and in excellent condition. Independent switch configuration: (3) 1x16 and (1) 1x4. Operating Wavelengths: 1550 ±30 nm (C band). Optical Interface: FC/APC. Bulkheads in back. 24 inches deep.

Part Number:
XN452XM5G
X:
Custom Configuration
N:
Optical Switch
4:
4 input channels
52:
52 output channels
X:
Multi Channel Latching
M:
Actuation Mechanism: Motor
5:
1550 ±30 nm (C band)
G:
Rack Mount with GPIB
Other features:
Single Mode Fiber, FC/APC, Bulkheads in back

Configuration:
(3) 1x16 & (1) 1x4
Switch 1:
common: COM1, channels: 1-16
Switch 2:
common: COM2, channels: 18-33
Switch 3:
common: COM3, channels: 35-51
Switch 4:
common: Channel 58, channels: 59-62

Our Technician Measured with 1550nm source: ≤ 3 dB Insertion Loss

The following options are installed:
001 - One Input Channel
Special Order - FC/APC Connectors
050 - Connectors on Front Panel
109 - 1280-1650nm 9/125um Single Mode

204 - 4 Output Channels

Configuration:
• Switch Config: 1x32 Switch
• Wavelength Range: 780 to 1350nm

• Fiber: 62.5/125 µm Multimode
• Connector: PC*

The IQ-9100 Optical Switch provides highly accurate and repeatable fiber-to-fiber switching. Designed for minimal reflectance, the switches integrate precision optical components into a compact modular package.

Exfo IQ-9100 Datasheet (pdf)
Exfo IQ-9100 Manual (pdf)

*This unit comes with the non-standard JDSU/Acterna/W&G optical interface as shown here. The JDSU/Acterna/W&G 2060 Universal Test Adapters are sold separately. They can be purchased here.

This Agilent / HP 86062C 2x40 Lightwave Optical Switch is used and in excellent condition.

The following options are installed:
• 002 - Two Input Channels

• 012 - FC/PC Connectors
• 051 - Connectors on Rear Panel
• 109 - 1280-1650nm 9/125um Single Mode
• 240 - 40 Outputs
• This unit also has Option C08

Our technicans measured at 1550nm:
Channel A1 1xN - <0.9 dB Insertion Loss, <0.05 dB Polarization Dependent Loss
Channel A2 2xN - <0.9 dB Insertion Loss, <0.05 dB Polarization Dependent Loss

Configuration:
• Switch Config: 1x4 Switch
• Fiber: 50/125 µm Multimode

• Connector: PC*

The IQ-9100 Optical Switch provides highly accurate and repeatable fiber-to-fiber switching. Designed for minimal reflectance, the switches integrate precision optical components into a compact modular package.

Exfo IQ-9100 Datasheet (pdf)
Exfo IQ-9100 Manual (pdf)

*This unit comes with the standard Exfo optical interface as shown here. The Exfo Universal Interface (EUI) Connector Adapters are sold separately. They can be purchased here.

Configuration:
• Switch Config: 1x16 Switch
• Fiber: 9/125 µm Singlemode

• Connector: FC/PC

The IQ-9100 Optical Switch provides highly accurate and repeatable fiber-to-fiber switching. Designed for minimal reflectance, the switches integrate precision optical components into a compact modular package.

Exfo IQ-9100 Datasheet (pdf)
Exfo IQ-9100 Manual (pdf)

This JDSU SC1C40484+22AF005FP 1x48 SC Series Fiber Optic Switch is used and in good condition. Channel 37 has very high insertion loss.

SC1C40484+22AF005FP

• Input Channels: 1
• C Configuration
• Input Pigtails on Back
• Output Channels: 48
• Output Pigtails on Back
• 62.5/125 µm Multimode Fiber
• Analog Return Loss
• Wavelength Range: 1270-1670 nm
• Optical Interface: FC/HPC

This JDSU SC2D10041+17XF000FA 2x4 SC Series Fiber Optic Switch is used and in excellent condition.

SC2D10041+17XF000FA

• 2 Input Channels, D Configuration
• Input Bulkheads on Front
• 4 Output Channels
• Output Bulkheads on Front
• 9/125 µm, Single Mode Fiber Type
• Standard Return Loss
• 1270-1670 nm Wavelength Range
• FC/APC Optical Interface

This DiCon GP700 Optical Switch, Multi-Switch Configuration is new from surplus stock. Rackmount chassis.

Switches: (2) 1x3, 1x11
Optical Interface: FC/PC

Fiber Type: Singlemode 9/125 um

Our Technician Measured:
All channels have: IL <1.0 dB

Click here for configuration diagram.

Option 062: FC/PC optical connector, 1x2 switch, 62.5/125 µm multimode fiber

Our technician measured this units insertion loss: < 0.5 dB


Part Number: ATO-30552

This Brüel & Kjær 2811 8-Channel Multiplexer with 4219 Artificial Voice Module is used and in excellent condition.

View Photo of the connector for the Type 4219 Module.
View Photo of top view of the Type 4219 Module.
View Photo of bottom view of the Type 4219 Module.

This DiCon GP700 Optical Switch 1x12 is used and in excellent condition. Rackmount chassis.

Inputs: 1
Outputs: 12
Optical Interface: FC/PC

Fiber Type: Singlemode 9/125 um

Our Technician Measured:
All channels have: IL <1.2 dB and PDL < 0.05 dB

This DiCon GP700 Optical Switch 8x8 is used and in excellent condition.

Configuration:
• Inputs: 8
• Outputs: 8
• Optical Interface: FC/PC

• Fiber Type: Singlemode 9/125 um

Our Technicians Measured:
• All Channels Have: IL <1.2dB and PDL <0.05


This Agilent / HP 86060C 2x4 Lightwave Switch is used and in excellent condition.

The following options are installed:
• 002: Two Input Channels

• 012: FC/PC Connectors
• 051: Connectors on Back Panel
• 109: 1280-1650 nm, 9/125 µm Single-Mode Fiber
• 204: Four Connectorized Output Channels

Our technicans measured at 1550nm:
Channel A1 1xN - <0.6 dB Insertion Loss, <0.05 dB Polarization Dependent Loss
Channel A2 1xN - <0.6 dB Insertion Loss, <0.05 dB Polarization Dependent Loss

This JDS 1x32 SC Series Fiber Optic Switch is used and in excellent condition.

SC1C20322+17XF000FA

• Input Channels: 1
• Bulkheads on Back
• Output Channels: 32
• 9/125 um Singlemode Fiber
• Standard Return Loss
• Wavelength Range: 1270-1670 nm
• Optical Interface: FC/APC

This unit does not have a JDSU configuration label but is configured to the specifications below.*

Configuration:
• D Configuration

• 2 Input Channels
• Input Bulkhead Connection(s) on Front
• 15 Output Channels
• Output Bulkhead Connection(s) on Front
• 9/125 Fiber Type
• Standard Return Loss
• Wavelength Range: 1270-1670 nm
• APC Connector Type

*This unit is equivalent to either the SB2D10151+27XF000FA or SB2D10151+17XF000FA.

This DiCon GP700 Optical Switch 7x14 is used and in excellent condition.

Inputs: 7
Outputs: 14
Optical Interface: FC/PC
Fiber Type: Singlemode 9/125 um


Our Technician Measured:
All Channels Have: IL < 1.2dB and PDL < .05

SB1C10021+27XF000FP

• C Configuration Switch
• 1 Input Channel

• Input Bulkhead Connection(s) on Front
• 2 Output Channels
• Output Bulkhead Connection(s) on Front
• 9/125 Fiber Type
• Standard Return Loss
• Wavelength Range 1270-1670 nm
• FC/HPC Connector Type

This JDS 1x8 SC Series Fiber Optic Switch is used and in excellent condition.

SC0864-CZFP-AG1

• Input Channels: 1
• Bulkheads on Back
• Output Channels: 8
• 62.5/125 µm Multimode Fiber
• Standard Return Loss
• Wavelength Range: 1270-1670 nm
• Optical Interface: FC/PC

SB12B5-CIFP

• C Configuration Switch
• 1 Input Channel

• Input Pigtail Connection(s) on Front
• 12 Output Channels
• Output Pigtail on Front
• 9/125 µm Fiber Type
• Standard Return Loss
• Wavelength Range 1270-1670 nm
• FC/HPC Connector Type

This DiCon VX500 18 Channel Low Profile 1xN Switch is used and in excellent condition.

Configuration:
• Insertion Loss: 0.6 dB typ. 1.0 dB max.

• Switching Time: 300ms + 16ms per channel max.
• Durability: 10 million cycles min.
• Housing Dimensions: 140 W x 23.6 H x 140 D mm

This Agilent / HP 86060C 1x4 Lightwave Switch is used and in excellent condition.

The following options are installed:
• 017 - SC/PC Connectors

• 001 - Single Input
• 050 - Connectors on Front Panel
• 109 - 1280-1650 nm, 9/125 um Single-mode Fiber
• 204 - 4 Connectorized Channels

Our technicans measured at 1550nm:
Channel A1 1xN - <0.8 dB Insertion Loss, <0.04 dB Polarization Dependent Loss

Configuration
• Switch Configuration: 1 x N
• Channel Configuration: 4 Channels

• Fiber: 9/125 µm Singlemode
• Connector: FC/APC

Exfo IQ-9100 Datasheet (pdf)
Exfo IQ-9100 Manual (pdf)

Configuration
• Switch Configuration: 1 x N
• Channel Configuration: 4 Channels

• Fiber: 9/125 µm Singlemode
• Connector: FC/SPC

Exfo IQ-9100 Datasheet (pdf)
Exfo IQ-9100 Manual (pdf)

This DiCon GP700 Optical Switch 5x5 is used and in excellent condition. Rackmount chassis.

Inputs: 5
Outputs: 5
Switch Configuration: Blocking, Directional

Optical Interface: FC/PC
Fiber Type: Singlemode 9/125 um

Our Technician Measured:
All channels have: IL <2.5 dB and PDL <0.07 dB
Most channels have: IL <1.5 dB and PDL <0.05 dB

This JDSU SC24B5-D2SP 2x24 SC Series Fiber Optic Switch is used and in excellent condition.

SC24B5-D2SP

• 2 Input Channels, D Configuration
• Input Bulkheads on Front
• 24 Output Channels
• Output Bulkheads on Front
• 9/125 µm, Single Mode Fiber Type
• Standard Return Loss
• 1270-1670 nm Wavelength Range
• FC/APC, FC/HPC, ST/APC ,ST/HPC Optical Interface*

*If required, these connectors can be converted to FC, SC or ST for an additional cost. Please contact Artisan sales for pricing and availability.

Option FCI: Connector type is FC/APC
Switch Type: 1x4
Return Loss: 60 dB
Insertion Loss: < 1.4 dB
SB2E10081+27AF000FA

• E Configuration Switch
• 2 Input Channel

• Input Bulkhead Connection(s) on Front
• 8 Output Channels
• Output Bulkhead Connection(s) on Front
• 9/125 Fiber Type
• Standard Return Loss
• Wavelength Range 1270-1670 nm
• FC/APC Connector Type

This LIGHTech LT 1100 2x50 Fiber-Optic Switch is used and in excellent condition. Fiber type: single mode (9/125 um). Optical Inputs: One FC/PC and One FC/APC. Fiber pigtails in rear: about 14 in long.

Part Number:
N250NM5G
N:
Optical Switch
2:
2 input channel
50:
50 output channels
M:
Actuation Mechanism: Motor
5:
Wavelength: 1550 nm
G:
Rack Mount with GPIB

Configuration:
2x50
Outputs:
50 FC/PC

Configuration:
• Switch Configuration: 1 x N
• Channel Configuration: 4 Channels

• Fiber: 9/125 µm Singlemode
• Connector: FC/UPC

Configuration:
• Switch Configuration: 2 x N
• Channel Configuration: 2 Channels

• Fiber: 9/125 µm Singlemode
• Connector: *UPC

*This unit comes with the standard Exfo optical interface as shown here. The Exfo Universal Interface (EUI) Connector Adapters are sold separately. They can be purchased here.

Configuration:

• Switch Configuration: Simplex 1x16
• Fiber Type: 9/125 Single Channel

• Wavelength Range: 1290-1360 nm and 1530-1560 nm
• Adapter Type: SC/PC
• 1 Input
• 16 Outputs

This module has all IL's within specifications.

Showing 1-100 of 231 Results
Contact Us
Fax:

(240) 376-1381