Items/Page
Showing 1-100 of 433 Results
This is also known as Densitron Part Number 4229BG-SNY.
This cable uses a microtech connector.

Part Number: 0921
Length: Approximately 1 m
Configuration:
• Optical Connector: SC, Single Mode
• Buffer Memory: 512 KB SRAM
• Control Memory: 128 KB SRAM
This Exfo IQ-200 Series Rackmount is used, and in excellent condition. For rackmounting IQ-203 and IQ-206 mainframes.

Configuration:
• Width: 19 in


This Newport Dual LDD Card Combination PCB is used and in excellent condition. It is a dual 26-pin to single 26-pin combiner used on Newport Dual LDD burn-in systems. It conveniently combines two dual LDD card output into a single 26-pin output. Sold individually.

Newport P/N: 7800080050 Rev. XA.

An ATG Technician's Report of the pinouts for this board can be found here.

This Newport FP3-FH1 Bare Fiber Holder is used, and in excellent condition.

*This item is an accessory and not sold separately. It must be combined with the purchase of a Newport 8-Channel Butterfly Fixture.*

This Newport Burn-In Drawer Laser Diode Driver Cabling Set is used, and in excellent condition. All (4) cables have the same length. The set was removed from a working Newport Burn-In system.

(4) LDD Cables:
Length: 1 m
Connectors: 15-pin male to 15-pin female, DB connector

This Newport Burn-In Drawer Laser Diode Driver Cabling Set is used and in excellent condition. All (4) cables have the same length. The set was removed from a working Newport Burn-In system.

(4) LDD Cables:
Length: 1 m
Connectors: 26-pin male to 26-pin female, DB connector

This Newport 8-Channel Butterfly Fixture Jumper Block is used, and in excellent condition. Printed on board: 7800708020 Rev B, 94V-0, & E68964-B2.

Compatible Laser Diode package pinout:
1: TEC Anode (TE+)
2: Thermistor+
3: Monitor PD Anode
4: Monitor PD Cathode
5: Thermistor-
6: N/C
7: N/C
8: N/C
9: N/C
10: LD Anode
11: LD Cathode
12: N/C
13: Case Ground
14: TEC Cathode (TE-)


This Newport 8-Channel Butterfly Fixture Jumper Block is used, and in excellent condition. Printed on board: 7800059070 Rev A, 94V-0, & E68964-B.

Compatible Laser Diode package pinout:
1: TEC Anode (TE+)
2: Thermistor+
3: Monitor PD Anode
4: Monitor PD Cathode
5: Thermistor-
6: N/C
7: N/C
8: N/C
9: N/C
10: LD Anode
11: LD Cathode
12: N/C
13: Case Ground
14: TEC Cathode (TE-)


This Exfo IQ Series 1-Slot Filler Panel is used and in excellent condition.
This EigenLight M4 Monitor Mount is used and in excellent condition. The M4 is an anodized aluminum mount with magnetic base for mounting Series 400 monitors.
There are some minor cosmetic blemishes due to this power supply being in warehouse storage. These blemishes do not affect operation. This power supply is made by Power-One. The manufacturer's part number is PFC375-S132.

Agilent's P/N: 0950-2868

Power-One PFC375-S132 Datasheet (pdf)

This Newport Burn-In Drawer Laser Diode Driver Cabling Set is used, and in excellent condition. All (4) cables have the same length. The set was removed from a working Newport Burn-In system.

(4) LDD Cables:
Length: 2 m
Connectors: 15-pin male to 15-pin female, DB connector

This AFL / Noyes OFI-200 Optical Fiber Identifier is used and in excellent condition. This unit comes with a carrying case.
This Agilent N1031A BenchLink Lightwave Software is new from surplus stock. It ships in the original shrink wrap. The manual is included. Software sold by Artisan does not included a warranty and therefore cannot be returned.
This Agilent 3458A Multimeter A/D Converter Board is being sold as-is without warranty. It has been priced accordingly

Part Number: 03458-66513 Revision A
This Corning FDM06P06-6T-3RH00 FDC Connector Module is new from surplus stock.

Configuration:

• (6) ST UPC Connectors
• 3M Pigtail

This Fujikura FH-12 Fiber Holder is used and in excellent condition. This fiber holder fits a 12-fiber ribbon.

Part Number: S010220
Configuration:
• CPU: Intel Celeron 566 MHz
• Memory: 128 MB

Part Number: 990-239-00, 1014-1999
Configuration:
• Standard Valve
• 12VDC

• Grommet: Lead Wire Length; 12 inch (300mm)

View Photo of the connector.

This Fujikura HJS-02 Hot Jacket Stripper is used and in excellent condition. AC adapter not included.
This Newport 22497-01 Blank Plug is used and in excellent condition. This is the same unit found in the 818-IS-1 Integrating Sphere Universal Fiber Optic Detector Kit.
This cable uses a microtech and a pico(M8) connector.

Part Number: 0925
Length: Approximately 1 m
This Hamamatsu C5331-01 Avalanche Photodiode (APD) Module is used and in excellent condition.

Configuration:

• Active Area: φ0.2 mm
• Frequency Bandwidth -3 dB: 4k to 100M Hz
• APD Type: Standard
• Peak Sensitivity Wavelength: 800nm

Configuration:
• Average Brightness (cd / cm²): 30,000
• Color Temperature: Line Spectrum with Peaks in UV and VIS

• Luminous Surface (Width x Height): 0.3 x 1.0 mm
8610

• LDD Output Current: 1000mA
• LDD Compliance Voltage Max: 7V
• Typical TEC Output Power: 15W (2.5A/6V)
This Applied Optoelectronics DFB-1310-BF Laser Module is used and in excellent condition. Optical Interface: FC/APC

Model: DFB-1310-BF
Part Number: EM107-01


Applied Optoelectronics DFB-1310-BF Datasheet (pdf)

This Thermo / Spectra-Tech 0030-005 Collector II Diffuse Reflectance Accessory is used and in excellent condition. This unit does not include the external housing.
This Ericsson 12S 250um Fiber Holder is used and in excellent condition. This is a single fiber holder and not a pair.

Part Number: 42SM009 R1
This NEC NDL7580P Laser Module is used and in excellent condition.

Part Number: NDL7580P

Configuration:

• Center Wavelength: 1629.7 nm

View Photo of this unit's test data, page 1
View Photo of this unit's test data, page 2

This Exfo IQ-16xx Channel Module is a parts unit and is being sold as-is without warranty.

Part Number: 41119, IQ-16xx, E-O ENG, PLQ246C
This Fujikura FH-6 Fiber Holder is used and in excellent condition. This fiber holder fits a 6-fiber ribbon. Items are sold individually (not in pairs).

Part Number: S010356
This Fujikura FH-8 Fiber Holder is used and in excellent condition. This fiber holder fits a 8-fiber ribbon. Items are sold individually (not in pairs).

Part Number: S010352
This Newport 460-XZ Low-Profile Integrated Ball Bearing Linear Stages is used and in excellent condition.
This cable has microtech connectors.

Part Number: 0922, 14039-01
Length: 1 m
This 250um Single Fiber Holder is used and in excellent condition.
This Newport SR-160-CF Fiber Adapted Super Cavity Optical Spectrum Analyzer is used and in excellent condition. This unit features a fitted wooden case with accessories. SR-UCC Universal Cavity Controller is sold separately.

View Photo of closed case.
View Photo of accessories.

Configuration:

• Wavelength Range: 1300-1350 nm
• Center Wavelength: 1325
• Free Spectral Range: 6 GHz
• Optical Connector: FC/PC

Part Number: SR-160-CF
• SR-160-CF: High Transmission Fiber Adapted SuperCavity

This JDSU RX3070 3mm InGaAs Detector is used and in excellent condition.

Power Range: 0 to -80 dBm
Optical Interface Adapter Sold Separately
This Magnelab 3930-001 Transformer for the 6000 Vortex Laser Controller is used and in excellent condition.
This DiCon FA500 Motorized Fiberoptic Attenuator is used and in excellent condition.

Part Number: FA500-13-9-N-P

FA500-13-9-N-P Configuration:

• Calibration Wavelength: 1310nm
• Connector Type: None (Bare Fiber Ends)
• Fiber Type: Single Ended, 9/125 µm

The fiber ends can be connectorized by an Artisan Technology Group Technician. Please contact an Artisan Sales Associate for pricing and availability.

This DiCon FA500 Motorized Fiberoptic Attenuator is used and in excellent condition.

Part Number: FA500-15-9-N-P

FA500-15-9-N-P Configuration:

• Calibration Wavelength: 1550nm
• Connector Type: None (Bare Fiber Ends)
• Fiber Type: Single Ended, 9/125 µm

The fiber ends can be connectorized by an Artisan Technology Group Technician. Please contact an Artisan Sales Associate for pricing and availability.

This Bosch / Rexroth / Indramat IK00985 Fiber Optic Cable (4 Meter) is used and in excellent condition.

Configurations:
• F-SMA Connectors
• 4 Meters
This Newport 31850-01S LC Adapter is used and in excellent condition. This is the same unit found in the 818-IS-1 Integrating Sphere Universal Fiber Optic Detector Kit.
This Newport 31856-01 SC Adapter is used and in excellent condition. This is the same unit found in the 818-IS-1 Integrating Sphere Universal Fiber Optic Detector Kit.

This Newport 22493-01 ST Adapter is used and in excellent condition. This is the same unit found in the 818-IS-1 Integrating Sphere Universal Fiber Optic Detector Kit.

This Newport Burn-In Drawer TEC Cabling Set is used, and in excellent condition. There are (6) cables of varying lengths in the set. The set was removed from a working Newport Burn-In system.

(6) TEC Cables:
Approximate Lengths: 15 in, 18 in, 21 in, 24 in, 27 in, and 30 in
Connectors: 15-pin male to 15-pin female, DB connector

This Corning / Siecor CamSplice Mechanical Splices (6 pack) is used and in excellent condition.

Part Number: 95-000-04
This NEC NDL7552P Laser Module is used and in excellent condition.

Part Number: NDL7552P

Configuration:

• Center Wavelength: 1559.5 nm

View Photo of this unit's test data, page 1
View Photo of this unit's test data, page 2

This Nortel LC25W5413BA-C28 DWDM Laser Module is used and in excellent condition. Optical Interface: FC/PC

Part Number: LC25W5413BA-C28
Wavelength: 1554.13 nm
This Burleigh / Exfo SA Plus High-Resolution Laser Spectrum Analyzer is used and in excellent condition.
There are some minor cosmetic blemishes due to this power supply being in warehouse storage. These blemishes do not affect operation. This power supply is made by Power-One. The manufacturer's part number is PFC375-S132.

Agilent's P/N: 0950-2868

Power-One PFC375-S132 Datasheet (pdf)

This is the VIAVI Solutions / JDSU SB Series Optical Switch: SB08B5-Z000267 Front Panel.
This Metcal NZA 350-350 APR Reflow Nozzle 35mm x 35mm is used and in excellent condition.

This Applied Optoelectronics DFB-1310-BF Laser Module is used and in excellent condition. Optical Interface: SC/APC

Model: DFB-1310-BF
Part Number: EM107-2


Applied Optoelectronics DFB-1310-BF Datasheet (pdf)

8325D

• Dual TEC Output Power: 15W
• TEC Output Current: 2.5A
This NEC NDL7552P Laser Module is used and in excellent condition.

Part Number: NDL7552P

Configuration:

• Center Wavelength: 1555.3 nm

View Photo of this unit's test data, page 1
View Photo of this unit's test data, page 2

This Newport VH-AM Support Ring Mount is used and in excellent condition.
Included:
• (3) NVKF334-6G Solenoid Valves

• (1) NVV3KF3-42-03-01T Manifold

NVKF334-6G Configurations:
• Standard Valve
• 12VDC
• Grommet: Lead Wire Length; 12 inch (300mm)

NVV3KF3-42-03-01T Configurations:
• Manifold: Type 42
• Porting: Side Ported
• Number of Stations: 3
• Port Size: 1/8 NPTF

This Corning / Siecor CamSplice Mechanical Splices (6 pack) is used and in excellent condition.

Part Number: 95-000-04-NL
This is the VIAVI Solutions / JDSU SB Series Optical Switch: SB1C10161+22XB00FP Front Panel.
This NEC NDL7552P Laser Module is used and in excellent condition.

Part Number: NDL7552P

Configuration:

• Center Wavelength: 1564.1 nm

View Photo of this unit's test data, page 1
View Photo of this unit's test data, page 2

This NEC NDL7552P Laser Module is used and in excellent condition.

Part Number: NDL7552P

Configuration:

• Center Wavelength: 1551.6 nm

View Photo of this unit's test data, page 1
View Photo of this unit's test data, page 2

This NEC NDL7552P Laser Module is used and in excellent condition.

Part Number: NDL7552P

Configuration:

• Center Wavelength: 1548.5 nm

View Photo of this unit's test data, page 1
View Photo of this unit's test data, page 2

This NEC NDL7552P Laser Module is used and in excellent condition.

Part Number: NDL7552P

Configuration:

• Center Wavelength: 1553.0 nm

View Photo of this unit's test data, page 1
View Photo of this unit's test data, page 2

This Tektronix CS-0010 TFP2A LCD Color Display is new from surplus stock. This unit is the LCD Color Shutter for the Tektronix TFP2A Optical Time Domain Reflectometer (OTDR).
This Coherent CUBE Laser Control Box is used and in excellent condition.

Includes:

• Interlock RCA Connection

Part Number: 1039966

This Corning SD-10-A 10Gb/s Integrated Optic Intensity Modulator with Attenuator is new surplus stock.

Labeled P/N: 791003301

Connections:

• Input Fiber: Bare Singlemode Fiber
• Output Fiber: Bare Singlemode Fiber
• RF Connector: K Connector (2.9 mm, Mates with SMA and 3.5 mm Connectors)
• BIAS Connector: SMA

This Agilent E4547A Wander Analysis Software package is complete and unopened. Software sold by Artisan does not included a warranty and therefore cannot be returned.
This Corning CamSplice Assembly Tool is used and in excellent condition.
Configuration:
• Power Range: 10 mW to 10 W
• Long Pulse Joules Range: 0.5 to 10 J

• Maximum Intermittent Power (<5 min.): 30 W
• Resolution: 1 mW

Part Number: 10979011

Configuration:
• Input: 115/230V
• Size: 80 VA
• Series Rating: 28.0 VCT @ 2.8A
• Parallel Rating: 14 V @ 5.6A
This Agilent N1031A BenchLink Lightwave Software is new from surplus stock. It ships in the original shrink wrap. Software sold by Artisan does not included a warranty and therefore cannot be returned.
This JFW Industries 50P-1300 50 Ohm Solid State Programmable Attenuator is used and in excellent condition. This unit has a SMA female RF Connector.

JFW Industries 50P-1300 Specifications (pdf)
JFW Industries 50P-1300 CAD Drawing (pdf)

View Photo of the back of this unit

This GE Healthcare / Amersham Biosciences ImageQuant 100 Image Capture System Accessory is used and in excellent condition.
This Fujikura FH-10 Fiber Holder is used and in excellent condition. This fiber holder fits a 10-fiber ribbon.

Part Number: S010348
Allows the Newport 8000 mainframe to be easily installed into a standard instrumentation rack.
Showing 1-100 of 433 Results
Contact Us
Fax:

(240) 376-1381