Marteq / Verteq 1600 Superclean Rinser Dryer
  • verteq_1600_view1
  • verteq_1600_view2
  • verteq_1600_view3
  • verteq_1600_view4

Marteq / Verteq 1600 Superclean Rinser Dryer

Features

  • Smoother Bowl Surfaces
  • Patented Non-Contact Seal
  • Easy to Operate and Service
  • Rotors are Designed to Ensure Even Rinsing

View our selection of these items below.


Have a quote from somewhere else? Click Here




Contact Us
Share:



This is a used Marteq / Verteq SC 1600 Superclean Rinser Dryer. We were unable to fully test this rinser dryer since it appears to be powered by an additional system. The top cover is not included with this unit. This item will be sold as/is without warranty and will be priced accordingly. However, if desired, this unit can be inspected on-site. Please contact Artisan Technology Group Sales to set this up.

Unit dimensions (L x W x H) - 28" x 15.75" x 16.25"
Unit dimensions with case (L x W x H) - 34" x 21" x 56"
Input power 120 VAC
Model number SC1600-5M

View Photo of inside chamber
View Photo of SC1600-5M rear view
View Photo of this unit's control panel
View Photo of this unit's control panel
View Photo of this unit's control panel
View Photo of this unit's control panel
View Photo of this unit's control panel




Stock # 64061-10




This is a used Marteq / Verteq 1600 Superclean Rinser Dryer. The gasket around the door is torn. This item will be sold as/is without warranty and will be priced accordingly. However, if desired, this unit can be inspected on-site. Please contact Artisan Technology Group Sales to set this up.

Unit dimensions (L x W x H) - 26.25" x 19.75" x 17.25"
Unit dimensions with case (L x W x H) - 30" x 20" x 54.5"
Input power 120 VAC
Model number 1600-3

View Photo of torn gasket
View Photo of inside chamber
View Photo of this unit's motherboard
View Photo of this unit's 742-A01 Unit
View Photo of this unit's 742-A01 Unit
View Photo of this unit's 742-A01 Unit
View Photo of this unit's 742-A01 Unit
View Photo of this unit's 742-A01 Unit




Stock # 64061-15



  • Description
  • Tech Specs
  • Datasheets / Manuals 
Contact Us
Share:

Description

Verteq rinser dryers provide several advantages over alternate drying methods. The tools are relatively simple, making them easy to operate and easy to service. Their compact size uses less floor or bench space than other systems, and they easily integrate into a wide variety of manual and automated production environments.

The SuperClean is a drying system that uses centrifugal force to dry the surface of substrates such as wafers, masks, or disks. Substrates are placed inside a drying chamber, held in place by a rotor, and spun at an appropriate speed depending on the nature of the load and process. The drying chamber, or bowl, is warmed with a continuous flow of hot filtered nitrogen and surface heaters on the outside walls. The liquid on the substrate surface is spun off and drained from the bowl while liquid droplets on the drying chamber surfaces are evaporated.

The system may also be used to pre-rinse the load prior to the drying cycle with ultra-pure DI water. The water is sprayed from a line of nozzles to provide even rinsing of the substrate surfaces. This may be done to rinse residual chemistries from the surface, or to replace existing water with fresh water prior to drying. When the dryer is used for dry-only processing, the rinse cycle may also be used for periodic cleaning of the bowl surfaces between loads.

Product Family: Superclean 1600, Superclean SC 1600, Superclean SC 1600-5M, Superclean SC-1600 5M, Superclean SC-1600-5M, SC1600-5M, SC 1600-5M, SC 1600 5M, SC1600, SC 1600, 1600
Contact Us
Share:

Specifications

Contact Us
Share:

Resources

Manuals, Datasheets, Drivers, Links

Link to Marteq / Verteq Website