Inficon XTC Thin Film Thickness and Rate Monitor
  • Inficon_XTC_NoRackmount_View1
  • Inficon_XTC_NoRackmount_View2
  • Inficon_XTC_NoRackmount_View3
  • Inficon_XTC_NoRackmount_View4

Inficon XTC Thin Film Thickness and Rate Monitor



This Inficon XTC Thin Film Thickness and Rate Monitor is used and in excellent condition. This unit does not include rackmount handles.

Configuration:
• Thickness Display Range: 0 - 999.9 kÅ
• Rate Display and Control Range: 0 - 999.9 Å/sec
• Measurement and Control Update Period: 0.25 sec
• Shutter Delay: ±5% of Rate Set Point
• Power Requirements: 120 / 240 V (+5, -25%), 50 - 60 Hz, 50 VA
• Operating Temperature: 0 - 50°C

Part Number: 751-001-G1




Have a quote from somewhere else? Click Here
Stock # 74324-3
Quick Quote
Sell Yours
Repair Quote
  • More Info
  • Tech Specs
  • Additional Photos
  • Datasheets / Manuals 
  • View It Live Request 
Contact Us
Share:
Inficon XTC Thin Film Thickness and Rate Monitor

Features
  • Simulates Deposition and Used for Unit Test
  • Sensor Input from Remote Oscillator
  • Serial and Parallel Computer Interface
  • RS-232 Communication Port

Description

A remarkable, affordable instrument that is less expensive than the crystal monitor it may replace, an is invaluable in any single layer vacuum deposition, sputtering process, or linked together in co-deposition vacuum or sputtering processes. The liquid crystal display keeps one continuously informed with complete deposition data including rate, thickness, and elapsed time as well as special messages like Crystal Fail. Complete, continuous real-time information reduces the possibility of costly mistakes.

The XTC unites with Inficon's field proven sensor heads and 6 MHz Plano-convex quartz crystals. The two provide superior sensitivity to measure low rate applications and the precision needed for demanding process repeatable specifications. The XTC has four special control functions. First is rate which allows complete control over a requested rate change during deposition. Next is the shutter delay feature which allows one to establish the desired deposition rate before the source shutter opens. third is the XTC's ability to allow completion of a run on time-power in the event of an unexpected crystal failure. Fourth is RateWatch; RateWatch automatically opens the shutter exposing the sensor to the deposition source, adjusts the power so the actual rate will precisely equal the desired rate within the programmed accuracy, and then automatically closes the sensor shutter holding the power at the adjusted level.


Product Family: XTC, 751-001-G1, 751001


Important Notice: Please note that any additional items included with this equipment such as accessories, manuals, cables, calibration data, software, etc. are specifically listed in the above stock item description and/or displayed in the photos of the equipment. Please contact one of our Customer Support Specialists if you have any questions about what is included with this equipment or if you require any additional information.


Contact Us
Share:

Specifications

Contact Us
Share:

Item Images

Click a thumbnail to view larger image:

Inficon XTC Thin Film Thickness and Rate MonitorInficon XTC Thin Film Thickness and Rate MonitorInficon XTC Thin Film Thickness and Rate Monitor
Inficon XTC Thin Film Thickness and Rate Monitor


Contact Us
Share:
Manuals, Datasheets, Drivers, Links

Inficon XTC Manual (pdf) 
Link to Inficon Website 


Contact Us
Share:

View It Live

View equipment LIVE - Before you buy!

InstraView™ Equipment Inspection



Buying used equipment doesn't always have to be a shot in the dark. We know there are plenty of differences when it comes to used equipment and quite often, choosing between different pieces is difficult, especially when the equipment is not sitting right in front of you.

Well, what if you were able to see a piece of equipment before you purchased it? Not just a picture from the manufacturer's website, but the actual piece of equipment you would receive.
With InstraView™, we move you one step closer to inspecting the equipment you're interested in without having to wait for the equipment to show up at your door.

InstraView™ works in your web browser and allows you to view the actual piece of equipment you're interested in before purchasing. You can zoom in close to see the labels with the serial number or zoom out to see the overall condition of the equipment.

It's like having the store come to you!


InstraView Request Form

To get started:

  1.   Fill in the request form below
  2.   We'll send you an email letting you know exactly when your piece of equipment will be available for viewing

Name:
Email:
Item to Inspect: 74324-3 - Inficon XTC Thin Film Thickness and Rate Monitor


All you need is a web browser (ie. Microsoft Internet Explorer or Netscape) and Sun's Java Runtime Environment installed. If you need to install the Sun Java Runtime, you may download the latest Java SE Runtime Environment (JRE) http://www.oracle.com/technetwork/java/javase/downloads/index.html