OMRON / Delta Tau PMAC VME Multi-Axis Machine Controller
  • Delta_Tau_PMAC_VME_View1_201942112542
  • Delta_Tau_PMAC_VME_View2_201942112542
  • Delta_Tau_PMAC_VME_View3_201942112542
  • Delta_Tau_PMAC_VME_View4_201942112542

OMRON / Delta Tau PMAC VME Multi-Axis Machine Controller

• PMAC Universal CPU Board, ASSY 602705-107, With 40 MHz Processor (Option 5A Installed)
• Option Provides approximately 120% computational speed increase over base version
• Option 1 - Additional four channels of quadrature encoders
• Option 3 - Enhanced Front Plate
• Firmware Version: 1.16C

Part Number: 602199-104

Have a quote from somewhere else? Click Here
Stock # 59511-21
Quick Quote
Sell Yours
Repair Quote
  • More Info
  • Tech Specs
  • Additional Photos
  • Datasheets / Manuals 
  • View It Live Request 
Contact Us
OMRON / Delta Tau PMAC VME Multi-Axis Machine Controller

  • Motorola DSP 56k Digital Signal Processor
  • RS-422 Serial Interface, VME Bus Interface
  • 8, 12, or 16 Axes of Highly Accurate, Simultaneous, Motion Control
  • Stand-Alone Operation
  • 16-Bit DAC Output Resolution


The Delta Tau Data Systems, Inc. Programmable Multi-Axis Controller (PMAC) is a family of high-performance servo motion controllers capable of commanding up to eight axes of motion simultaneously with a high level of sophistication. Through the power of a Digital Signal Processor (DSP), PMAC offers a price-performance ratio for multi-axis control that was not previously available. Motorola's DSP56001 is the CPU for PMAC, and it handles all the calculations for all eight axes.

There are four hardware versions of PMAC: the PMAC PC, the PMAC Lite, the PMAC VME, and the PMAC STD. These cards differ from each other in their form factor, the nature of the bus interface, and in the availability of certain I/O ports. All versions of the card have identical on-board firmware, so PMAC programs written for one version will run on any other version. The PMAC STD has a different memory mapping of some I/O.

Any version of PMAC may run as a standalone controller, or it may be commanded by a host computer, either over a serial port or over a bus port.

As a general purpose controller, PMAC can serve in a wide variety of applications, from those requiring sub-micro inch precision to those needing hundreds of kilowatts or horsepower. Its diverse uses include robotics, machine tools, paper and lumber processing, assembly lines, food processing, printing, packaging, material handling, camera control, automatic welding, silicon wafer processing, laser cutting, and many others.


Important Notice: Please note that any additional items included with this equipment such as accessories, manuals, cables, calibration data, software, etc. are specifically listed in the above stock item description and/or displayed in the photos of the equipment. Please contact one of our Customer Support Specialists if you have any questions about what is included with this equipment or if you require any additional information.

Contact Us


Contact Us

Item Images

Click a thumbnail to view larger image:

OMRON / Delta Tau PMAC VME Multi-Axis Machine ControllerOMRON / Delta Tau PMAC VME Multi-Axis Machine ControllerOMRON / Delta Tau PMAC VME Multi-Axis Machine Controller
OMRON / Delta Tau PMAC VME Multi-Axis Machine Controller

Contact Us

View It Live

View equipment LIVE - Before you buy!

InstraView™ Equipment Inspection

Buying used equipment doesn't always have to be a shot in the dark. We know there are plenty of differences when it comes to used equipment and quite often, choosing between different pieces is difficult, especially when the equipment is not sitting right in front of you.

Well, what if you were able to see a piece of equipment before you purchased it? Not just a picture from the manufacturer's website, but the actual piece of equipment you would receive.
With InstraView™, we move you one step closer to inspecting the equipment you're interested in without having to wait for the equipment to show up at your door.

InstraView™ works in your web browser and allows you to view the actual piece of equipment you're interested in before purchasing. You can zoom in close to see the labels with the serial number or zoom out to see the overall condition of the equipment.

It's like having the store come to you!

InstraView Request Form

To get started:

  1.   Fill in the request form below
  2.   We'll send you an email letting you know exactly when your piece of equipment will be available for viewing

Item to Inspect: 59511-21 - OMRON / Delta Tau PMAC VME Multi-Axis Machine Controller

All you need is a web browser (ie. Microsoft Internet Explorer or Netscape) and Sun's Java Runtime Environment installed. If you need to install the Sun Java Runtime, you may download the latest Java SE Runtime Environment (JRE)