GE Fanuc IC660CBB903G BUS Control Module without Diagnostics

GE Fanuc IC660CBB903G BUS Control Module without Diagnostics

This GE Fanuc IC660CBB903G BUS Control Module without Diagnostics is new from surplus stock. This unit ships in the manufacturer's original packaging with standard documentation and accessories.

Accessories Include:
• 44A713909-003: 150 Ohm Bus Terminating Plug
• 44A713909-004: 75 Ohm Bus Terminating Plug
• GFK-0171: Series Six Bus Controller Manual
• GEK-90486: Genius I/O System Manual
• GFK-0025A: Genius I/O System Bus Controller Datasheet

Have a quote from somewhere else? Click Here
Stock # 63752-1
Quick Quote
Sell Yours
Repair Quote
  • More Info
  • Tech Specs
  • Additional Photos
  • Datasheets / Manuals 
  • View It Live Request 
Contact Us
GE Fanuc IC660CBB90xx Series BUS Control Modules

  • Interfaces Genius I/O Serial Bus to Series Six Plus Controller
  • Provides Channel Selection for Expanded I/O Addressing
  • 4-Segment DIP Switch


The GE Fanuc IC660CBB90xx Series BUS Control Modules are a required interface between a Series Six Plus PLC and the Genius I/O blocks when they are included in the PLCs I/O system. The Bus Controller module can be placed in any I/O slot in the CPU or in a high-capacity I/O rack located in a CPU station or Local I/O station up to 2000 feet (600 meters) from the CPU. Multiple Bus Controllers can be placed in one rack. Since each Bus Controller consumes 20 units of load, up to 5 modules can be placed in a CPU rack, or 10 modules in a high capacity I/O rack.

A Bus Controller can be placed in an I/O rack in a Remote I/O station if the CPU scan time is greater than 10 ms. However, because of the reduced capacity of the serial I/O communications link, window commands would not be supported. Each Bus Controller can interface up to 30 Genius I/O blocks to the Series Six Plus CPU by twisted pair communications up to 2000 feet (600 meters). The only limit to the number of Bus Controllers in any one PLC system is the l/O capacity of the Series Six Plus CPU. Each Bus Controller, similar to any I/O module, has access to all l/O references on its I/O chain.

A 4-segment DIP switch located on the module is used to enable channel selection for Expanded I/O addressing. If Normal (non-expanded) addressing is used or if channel selection is made through I/O Transmitter Modules, no switch setting is necessary.

The Genius I/O bus must be terminated at the Bus Controller by its characteristic impedance. The enhanced version Bus Controller provides three selectable on-board impedances, 100Ω, 150Ω, or 750Ω. Three jumpers (JPI, JP2, and JP3) on the module are used to select one of the listed values, or to select no impedance.

Product Family: IC660CBB903G, IC660CBB903H, IC660CBB903K, IC660CBB903, IC660CBB902, IC600CBB902G, IC600 CBB902G, IC600-CBB902G, IC600CBB902H, IC600 CBB902H, IC600-CBB902H Genius I/O, Series Six

Important Notice: Please note that any additional items included with this equipment such as accessories, manuals, cables, calibration data, software, etc. are specifically listed in the above stock item description and/or displayed in the photos of the equipment. Please contact one of our Customer Support Specialists if you have any questions about what is included with this equipment or if you require any additional information.

Contact Us


Contact Us

Item Images

Click a thumbnail to view larger image:

GE Fanuc IC660CBB90xx Series BUS Control ModulesGE Fanuc IC660CBB90xx Series BUS Control Modules

Contact Us

View It Live

View equipment LIVE - Before you buy!

InstraView™ Equipment Inspection

Buying used equipment doesn't always have to be a shot in the dark. We know there are plenty of differences when it comes to used equipment and quite often, choosing between different pieces is difficult, especially when the equipment is not sitting right in front of you.

Well, what if you were able to see a piece of equipment before you purchased it? Not just a picture from the manufacturer's website, but the actual piece of equipment you would receive.
With InstraView™, we move you one step closer to inspecting the equipment you're interested in without having to wait for the equipment to show up at your door.

InstraView™ works in your web browser and allows you to view the actual piece of equipment you're interested in before purchasing. You can zoom in close to see the labels with the serial number or zoom out to see the overall condition of the equipment.

It's like having the store come to you!

InstraView Request Form

To get started:

  1.   Fill in the request form below
  2.   We'll send you an email letting you know exactly when your piece of equipment will be available for viewing

Item to Inspect: 63752-1 - GE Fanuc IC660CBB903G BUS Control Module without Diagnostics

All you need is a web browser (ie. Microsoft Internet Explorer or Netscape) and Sun's Java Runtime Environment installed. If you need to install the Sun Java Runtime, you may download the latest Java SE Runtime Environment (JRE)