Delta Tau PMAC-PC Programmable Multi-Axis Controller Baseboard Only
  • DeltaTau_PMAC_PC_NoOptions_View1
  • DeltaTau_PMAC_PC_NoOptions_View2
  • DeltaTau_PMAC_PC_NoOptions_View3

Delta Tau PMAC-PC Programmable Multi-Axis Controller Baseboard Only

This unit is missing the faceplate. This unit also does not include the CPU module. This should only be purchased as a replacement baseboard. It will not function as a full PMAC-PC card unless end user installs a CPU module. It has been priced accordingly.

Part Number: 602191-103

• Option 1: Provides an Additional Four Channels of On-Board Axis Interface Circuitry
• CPU Card is not included

Have a quote from somewhere else? Click Here
Stock # 67682-4
Quick Quote
Sell Yours
Repair Quote
  • More Info
  • Tech Specs
  • Additional Photos
  • Datasheets / Manuals 
  • View It Live Request 
Contact Us
Delta Tau PMAC-PC Programmable Multi-Axis Controller

  • Motorola DSP 56001, 56002, and 56003 Digital Signal Processors
  • Battery Backed Ram, Flash Memory, or Combination of Flash and Battery Backed
  • Up to 8 Servo Axes Per Board
  • 20, 40, 60 and 80 MHz Versions


The PMAC PC is a full-sized ISA-bus expansion card, with a small piggyback board containing the CPU board. This piggyback board occupies part of the next slot, but 1/2-sized boards (such as the Option 2 Dual-Ported RAM board) are permitted in this next slot. While the PMAC PC is capable of ISA bus communications, with or without the optional dual-ported RAM, it does not need to be inserted into an ISA expansion slot. Communications can be done through an RS-232 or RS-422 serial port. Standalone operation is also possible.

Product Family: PMAC-PC, PMACPC, PMAC PC, 400-602204-10x, 400 602204 10x, 40060220410x

Important Notice: Please note that any additional items included with this equipment such as accessories, manuals, cables, calibration data, software, etc. are specifically listed in the above stock item description and/or displayed in the photos of the equipment. Please contact one of our Customer Support Specialists if you have any questions about what is included with this equipment or if you require any additional information.

Contact Us


Contact Us

Item Images

Click a thumbnail to view larger image:

Delta Tau PMAC-PC Programmable Multi-Axis Controller

Contact Us

View It Live

View equipment LIVE - Before you buy!

InstraView™ Equipment Inspection

Buying used equipment doesn't always have to be a shot in the dark. We know there are plenty of differences when it comes to used equipment and quite often, choosing between different pieces is difficult, especially when the equipment is not sitting right in front of you.

Well, what if you were able to see a piece of equipment before you purchased it? Not just a picture from the manufacturer's website, but the actual piece of equipment you would receive.
With InstraView™, we move you one step closer to inspecting the equipment you're interested in without having to wait for the equipment to show up at your door.

InstraView™ works in your web browser and allows you to view the actual piece of equipment you're interested in before purchasing. You can zoom in close to see the labels with the serial number or zoom out to see the overall condition of the equipment.

It's like having the store come to you!

InstraView Request Form

To get started:

  1.   Fill in the request form below
  2.   We'll send you an email letting you know exactly when your piece of equipment will be available for viewing

Item to Inspect: 67682-4 - Delta Tau PMAC-PC Programmable Multi-Axis Controller Baseboard Only

All you need is a web browser (ie. Microsoft Internet Explorer or Netscape) and Sun's Java Runtime Environment installed. If you need to install the Sun Java Runtime, you may download the latest Java SE Runtime Environment (JRE)