GE / Bently Nevada 3500/22M Standard Transient Data Interface
  • GE_Bently_Nevada_3500_22M_View1_2017112121011
  • GE_Bently_Nevada_3500_22M_View2_2017112121011
  • GE_Bently_Nevada_3500_22M_View3_2017112121011
  • GE_Bently_Nevada_3500_22M_View4_2017112121011

GE / Bently Nevada 3500/22M Standard Transient Data Interface

Part Number: 138607-1

Have a quote from somewhere else? Click Here
Stock # 78116-36
Quick Quote
Sell Yours
Repair Quote
  • More Info
  • Tech Specs
  • Additional Photos
  • Datasheets / Manuals 
  • View It Live Request 
Contact Us
GE / Bently Nevada 3500/22M Series Transient Data Interfaces

  • Interface Between the 3500 Monitoring System and System 1 Machinery Management Ssoftware
  • Combines Capability of 3500/20 RIM with Communication Processor
  • Operates in Conjunction with the M Series Monitors


The GE / Bently Nevada 3500/22M Series Transient Data Interfaces (TDI) are the interface between the 3500 monitoring system and Bently Nevada's System 1 machinery management software. The TDI combines the capability of a 3500/20 Rack Interface Module with the data collection capability of a communication processor such as TDXnet.

TDI operates in the RIM slot of a 3500 rack in conjunction with the M series monitors (3500/40M, 3500/42M, etc.) to continuously collect steady state and transient waveform data and pass this data through an Ethernet link to the host software. Static data capture is standard with the TDI, however using an optional Channel Enabling Disk will allow dynamic or transient data to be captured as well. TDI has made improvements in several areas over previous communication processors in addition to incorporating the Communication Processor function within the 3500 rack.

TDI provides certain functions common to the entire rack, however the TDI is not part of the critical monitoring path and has no effect on the proper, normal operation of the overall monitor system. One TDI or RIM is required per rack. The TDI occupies only a single slot in the rack and is always located in Slo t 1 (next to the power supplies).

For Triple Modular Redundant (TMR) applications, the 3500 System requires a TMR version of the TDI. In addition to all the standard TDI functions, the TMR TDI also performs "monitor channel comparison". The 3500 TMR configuration executes monitoring voting using the setup specified in the monitor options. Using this method, the TMR TDI continually compares the outputs from three (3) redundant monitors. If the TMR detects that the information from one of those monitors is no longer equivalent (within a configured percent) to the remaining two, it will flag the monitor as being in error and place an event in the System Event List.

Product Family: 3500/22M, 3500-22M, 3500 22M

Important Notice: Please note that any additional items included with this equipment such as accessories, manuals, cables, calibration data, software, etc. are specifically listed in the above stock item description and/or displayed in the photos of the equipment. Please contact one of our Customer Support Specialists if you have any questions about what is included with this equipment or if you require any additional information.

Contact Us


Contact Us

Item Images

Click a thumbnail to view larger image:

GE / Bently Nevada 3500/22M Series Transient Data InterfacesGE / Bently Nevada 3500/22M Series Transient Data InterfacesGE / Bently Nevada 3500/22M Series Transient Data Interfaces
GE / Bently Nevada 3500/22M Series Transient Data Interfaces

Contact Us
Manuals, Datasheets, Drivers, Links

GE / Bently Nevada 3500/22M Datasheet (pdf) 
Link to GE / Bently Nevada Website 

Contact Us

View It Live

View equipment LIVE - Before you buy!

InstraView™ Equipment Inspection

Buying used equipment doesn't always have to be a shot in the dark. We know there are plenty of differences when it comes to used equipment and quite often, choosing between different pieces is difficult, especially when the equipment is not sitting right in front of you.

Well, what if you were able to see a piece of equipment before you purchased it? Not just a picture from the manufacturer's website, but the actual piece of equipment you would receive.
With InstraView™, we move you one step closer to inspecting the equipment you're interested in without having to wait for the equipment to show up at your door.

InstraView™ works in your web browser and allows you to view the actual piece of equipment you're interested in before purchasing. You can zoom in close to see the labels with the serial number or zoom out to see the overall condition of the equipment.

It's like having the store come to you!

InstraView Request Form

To get started:

  1.   Fill in the request form below
  2.   We'll send you an email letting you know exactly when your piece of equipment will be available for viewing

Item to Inspect: 78116-36 - GE / Bently Nevada 3500/22M Standard Transient Data Interface

All you need is a web browser (ie. Microsoft Internet Explorer or Netscape) and Sun's Java Runtime Environment installed. If you need to install the Sun Java Runtime, you may download the latest Java SE Runtime Environment (JRE)