Abaco Systems / SBS A429-PCI2-16 ARINC PCI Interface
- Each Channel Can Transmit or Recieve
- Each Channel Can Operate at High or Low Speed
- Each Channel Can Receive and/or Bus Monitoring
- 48-bit 1 μsec Time Stamp
- Advanced Bus Scheduling
- Filterable Sequential Buffer
- Error Detection
The GE Fanuc / SBS A429-PCI2 ARINC PCI Interface provides a 16 channel highly programmable ARINC interface over the PCI backplane. Each channel is software configurable for transmit or receive, high or low speed (100 k or 12.5 k bits per second) and ARINC 429 or 575 protocol requirements. Any channel may transmit source lists. The current value table, local monitor and/or global monitor buffers may filter and receive sink data. Either the Label or Label/SDI identify and sort the ARINC data. The on-board DSP controls the flexible data structures, triggers, interrupts, time stamping and data communications on the 429 bus. You can use external triggers for synchronization. The advanced interrupt technology allows real-time event handling by the host processor.
As it receives each 32-bit ARINC 429 data, a 48-bit, 1 μsec time tag time stamps the data word. When placing the receive channel in the monitor mode, a 16-bit status word accompanies the time stamped data. This provides error information regarding each received word.
When a channel is setup as a transmitter, you can send any number of label sequences on each channel. All transmit channels may also be synchronized for simultaneous transmission. Each transmitted ARINC word has an accompanying control word. The control word implements various error injection capabilities. You can transmit the words in scheduled and/or asynchronous priority methods.
Product Family: A429PCI216, A429 PCI2 16, A429 PCI2-16, A429-PCI2 16, A429PCI2-16, A429-PCI216
Important Notice: Please note that any additional items included with this equipment such as accessories, manuals, cables, calibration data, software, etc. are specifically listed in the above stock item description and/or displayed in the photos of the equipment. Please contact one of our Customer Support Specialists if you have any questions about what is included with this equipment or if you require any additional information.