The smart card is addressed over the VXIbus, and all other modules resident in the VXIbus chassis are controlled by this card. Option 01 uses the local bus on the VXI P2 connector to provide scanning, delay and exclude capabilities. The built-in-test features in the smart card include confidence checking which monitors the state of each relay. It monitors a spare set of contacts or sensing coil current to ensure the switching system configuration is as programmed.
Part Numbers: CP290-01, 407377-100, 407377-910 ***Purchase of this unit requires the trade-in of another CP290-01 Power Supply. Please contact Artisan Sales for further details. (A fee will be applied if a CP290-01 is not traded-in.)***
Part Numbers: CP290-01, 407377-100, 407377-910 ***Purchase of this unit requires the trade-in of another CP290-01 Power Supply. Please contact Artisan Sales for further details. (A fee will be applied if a CP290-01 is not traded-in.)***
The Option 01 Smart Card can be installed upon request. They can be purchased here, Item Number: 55192-7. Product Family: 5998-01-505-2862, 5998015052862
The Option 01T controls and receives all eight TTL trigger lines available on the VXIbus. It offers both message-based and register-based control in one module, combining ease-of-use with high-speed capability. The message-based interface accepts SCPI and IEEE-488.2 commands to communicate with all Racal Instruments VXIbus switch modules.
Part Numbers: CP290, 407377, 200033-001, 200033-501 ***Purchase of this unit requires the trade-in of another CP290 or CP290-01 Power Supply. Please contact Artisan Sales for further details. (A fee will be applied if a CP290 or CP290-01 is not traded-in.)***
Configuration: • (1) 1x96 multiplexer, 2-wire • Mating connectors (see datasheet) can be ordered directly from Racal Instruments, if required.
Part Number: 404944, 404944-S-1530
The Option 01 Smart Card can be installed upon request. They can be purchased here, Item Number: 55192-7. Product Family: 6625-01-408-6029, 6625014086029
***Purchase of this unit requires the trade-in of another 1260-22. Please contact Artisan Sales for further details. (A fee will be applied if a 1260-22
is not traded-in.)***
Part Number: 407630
The Option 01 Smart Card can be installed upon request. They can be purchased here, Item Number: 55192-7.
Mating connectors can be ordered directly from Racal Instruments, if required. The Option 01 Smart Card can be installed upon request. They can be purchased here, Item Number: 55192-7.
Configuration: • (1) 1x96 multiplexer, 2-wire • Mating connectors (see datasheet) can be ordered directly from Racal Instruments, if required.
Part Number: 404944-001, 404944-S-1530-001
The Option 01 Smart Card can be installed upon request. They can be purchased here, Item Number: 55192-7. Product Family: 5998-01-439-9310, 5998014399310
Mating connectors (see datasheet) can be ordered directly from Racal Instruments, if required. The Option 01 Smart Card can be installed upon request. They can be purchased here, Item Number: 55192-7.
Part Numbers: 404941, 404941-S-1530, 404941-S-1530, 404941-S-1531, 404941-S-1172
The Option 01 Smart Card can be installed upon request. They can be purchased here, Item Number: 55192-7. Product Family: 6625-01-475-7087, 6625014757087
Model: 1260-45A Description: Four 4x16 Matrices Part Numbers: 407052-001, 407052-411, 407052-101 An Option 01 or Option 01T Smart Card can be installed upon request. They can be purchased here, Item Number: 55192-7 OR here, Item Number: 55192-9. Product Family: 6625-01-502-6033, 6625015026033, 5998-01-451-5149, 5998014515149
This EADS / Racal 1260-37A Multiplexer Module is used and in excellent condition. The external Crimp connector is not included The Option 01 Smart Card can be installed upon request. They can be purchased here. Item Number: 55192-7.
The Option 01 Smart Card can be installed upon request. They can be purchased here, Item Number: 55192-7. Product Family: 6625-01-475-7087, 6625014757087
Mating connectors can be ordered directly from Racal Instruments, if required. The Option 01 Smart Card can be installed upon request. They can be purchased here, Item Number: 55192-7.
Configuration: • (1) 1x96 multiplexer, 2-wire • Mating connectors (see datasheet) can be ordered directly from Racal Instruments, if required.
Part Number: 404944, 404944-S-1530
The Option 01 Smart Card can be installed upon request. They can be purchased here, Item Number: 55192-7. Product Family: 6625-01-408-6029, 6625014086029
This EADS / Racal 1260-37 Multiplexer Module is used and in excellent condition. The external IDC connector is not included. The Option 01 Smart Card can be installed upon request. They can be purchased here. Item Number: 55192-7.
The Option 01 Smart Card can be installed upon request. They can be purchased here, Item Number: 55192-7. Product Family: 5895-01-573-4492, 5895015734492
Configuration: • Part Number: 407374-01220 • Monitor: No System Monitor • Cable Tray: 1U for a total of 9U • Fan Cover: Fully Enclosed • Comes with CP290 Power Supply. If CP290-01 is required, please ask Artisan Sales for Pricing and Availability.
Configuration: • Part Number: 407374-01211 • Monitor: System Monitor • Cable Tray: 1U for a Total of 9U • Fan Cover: Extended Frame (View photo here) • Comes with CP290 Power Supply. If CP290-01 is required, please ask Artisan Sales for Pricing and Availability.
Configuration: • Part Number: 407374-01211 • Monitor: Standard System Monitor (SMS) • Cable Tray: 1U for a Total of 9U • Fan Cover: Fully Enclosed • Comes with CP290 Power Supply. If CP290-01 is required, please ask Artisan Sales for Pricing and Availability.
Configuration: • Part Number: 407374-01212 • Monitor: Enhanced System Monitor (EMS) • Cable Tray: 1U for a Total of 9U • Fan Cover: Fully Enclosed • Comes with CP290 Power Supply. If CP290-01 is required, please ask Artisan Sales for Pricing and Availability. Product Family: 6625-01-480-6989, 6625014806989
The Option 01 Smart Card can be installed upon request. They can be purchased here, Item Number: 55192-7. Product Family: 5963-01-533-8608, 5963015338608, 1680-01-620-1802, 1680016201802
This unit ships with the 407101 Accessory Pack w/ Manual.
The Option 01 Smart Card can be installed upon request. They can be purchased here, Item Number: 55192-7. Product Family: 5998-01-505-2862, 5998015052862
This Racal 1003 Power Controller is used, and in excellent condition. It plugs into 208V 3-Phase and distributes the power to several 120VAC outlets. It is for distributing 120VAC power within a rack where the rack's total power consumption exceeds normal 120VAC current/power capabilities. There is a 30 Amp (per phase) 3-Phase breaker on the rear. There are (2) dual 120VAC switched outlets for each phase, as well as one 120VAC unswitched outlet. The front panel has AC Power On & Off switches, as well as an Emergency Off button with an adjacent Reset switch. There is also a 15-Pin D-type connector and a small fuse assembly on the side of the unit.
For a picture with the top cover removed click here
This Racal Model 1260-50D 200MHz RF Multiplexer Module is used, and in excellent condition. Interface pins, connectors, and/or cable assemblies can be purchased from Racal Instruments. Configuration: (16) 1x4 50Ω Multiplexers
Part Number: 407366-002
The Option 01 Smart Card can be installed upon request. They can be purchased here, Item Number: 55192-7.
These interfaces are required to allow control by a module equipped with an Option 01 or Option 01T Smart Card. Revision C boards do not have the W22 jumper capability. Part Number: 401951-003 Rev C and 401951 Rev C
Part Number: 407499-001 An Option 01 or Option 01T Smart Card can be installed upon request. They can be purchased here, Item Number: 55192-7 OR here, Item Number: 55192-9.
There are 6 VXI single slot airflow directors in one package. In order to improve the cooling of the used slots, in the Racal 1261A VXI Mainframe, a limited number of airflow directors may be installed at empty slot locations to redirect otherwise wasted airflow.
Configuration: • Part Number: 407374-01112 • Monitor: Enhanced System Monitor (EMS) • Cable Tray: No Cable Tray, Mainframe is 7U • Fan Cover: No Fan Cover • Comes with CP290 Power Supply. If CP290-01 is required, please ask Artisan Sales for Pricing and Availability.
This unit is configured as (1) 1x40 Multiplexer. Mating connectors (see datasheet) can be ordered from Racal Instruments, if required. The Option 01 Smart Card can be installed upon request. They can be purchased here. Item Number: 55192-7.
Configuration: • Part Number: 407374-S-1530 • Monitor: No System Monitor • Cable Tray: 1U for a Total of 9U • Fan Cover: No Fan Cover • Comes with CP290 Power Supply. If CP290-01 is required, please ask Artisan Sales for Pricing and Availability.
Configuration: • Part Number: 407374-01120 • Monitor: No System Monitor • Cable Tray: No Cable Tray, Mainframe is 7U • Fan Cover: No Fan Cover • Comes with CP290 Power Supply. If CP290-01 is required, please ask Artisan Sales for Pricing and Availability.
Configuration: • Part Number: 407374-01211 • Monitor: Standard System Monitor (SMS) • Cable Tray: 1U for a Total of 9U • Fan Cover: No Fan Cover • Comes with CP290 Power Supply. If CP290-01 is required, please ask Artisan Sales for Pricing and Availability.
Configuration: • Part Number: 407374-01122 • Monitor: Enhanced System Monitor (EMS) • Cable Tray: 1U for a Total of 9U • Fan Cover: No Fan Cover • Comes with CP290 Power Supply. If CP290-01 is required, please ask Artisan Sales for Pricing and Availability.
The Option 01 Smart Card can be installed upon request. They can be purchased here, Item Number: 55192-7. Product Family: 6625-01-440-1290, 6625014401290
Channel C Installed. This option extends the frequency measurement reange to 1.3 GHz. Input C has a fixed input impedance of 50 ohms, and a bandwidth of 40 MHz to 1.3 GHz.
Configuration: • Part Number: 407374-01212 • Monitor: Enhanced System Monitor (EMS) • Integrated Cable Tray • Fan Cover: No Fan Cover • Comes with CP290 Power Supply. If CP290-01 is required, please ask Artisan Sales for Pricing and Availability.
Installed Options: • Option 51: Backplane with Connector Grounding Shrouds
Configuration: • Part Number: 407374-01212 • Monitor: Enhanced System Monitor (EMS) • Cable Tray: 2U for a Total of 10U • Fan Cover: Fully Enclosed • Comes with CP290 Power Supply. If CP290-01 is required, please ask Artisan Sales for Pricing and Availability.
Installed Options: • Option 21: Add 1U to Cable Tray making it 2U
This unit ships in the original manufacturing packaging.
Configuration: • Part Number: 407374-01212 • Monitor: Enhanced System Monitor (EMS) • Cable Tray: 1U for a Total of 9U • Fan Cover: Fully Enclosed • Comes with CP290 Power Supply. If CP290-01 is required, please ask Artisan Sales for Pricing and Availability.
This Astronics / EADS / Racal 1250-30B Scanner / Multiplexer Module ships with in manufacturer's bag with terminal block and accessories.
Card Part Number: 401900 1250-80 Terminal Block Part Number: 404381 Accessories Part Numbers: 404531, 601237, 921041
The 1250-30B Scanner / Multiplexer Module is a user configurable switching module that may be configured in three different configurations for use at frequencies up to 20 MHz. These are: • One 1 x 20 two-wire scanner / multiplexers • Two 1 x 10 two-wire scanner / multiplexers • Two 1 x 5 and two 1 x 4 two-wire scanner / multiplexers
The 1250-30B allows the automatic connection to each channel of a user specified termination when the channel is open.
This Astronics / EADS / Racal 1250-20 Power Switching Module with Terminal Block ships in the manufacturer's static bag, with terminal block included.
Card Part Number: 401757 Terminal Block Part Number: 404381
The 1250-20 Power switching module provides switching for AC or DC power supplies and current sources. Switching networks may be configured from the ten independent DPST relays provided. The 1250-20 switches up to 8 A at 250 VAC rms or 5 A at 48 VDC. Relay contacts are monitored to provide user selectable confidence checking. Each channel provides mounting holes to allow the addition of shunt and series elements such as arc suppressors, filters, etc. A fused +13 V DC supply is provided for driving external relays. Separate connections to both sides of the relay allow each channel to function independently or to be configured as custom networks.
This unit includes: Manual, cable connectors, and connector hardware. The Option 01 Smart Card can be installed upon request. They can be purchased here, Item Number: 55192-7.
Model: 1260-45B Description: Two 4x32 Matrices w/IDC Connector Part Number: 407052-102 An Option 01 or Option 01T Smart Card can be installed upon request. They can be purchased here, Item Number: 55192-7 OR here, Item Number: 55192-9. Product Family: 6625-01-439-9527, 6625014399527
This Racal Model 3151B 100MS/s Waveform Generator is a lightly used demo unit and in excellent condition. This unit also comes with the 31521B Driver CD. 408166-001 - Model 3151B - 408166-001 - 300MS/s Waveform Generator, w/1M RAM