Items/Page
Showing 1-100 of 4463 Results
Internal ribbon cable for VXIbus modules with P2 connector is sold separately.
This stock-item is for the mainframe power supply only.

Part Numbers: 0950-3704, E1401-69203, 7000119-0000

This is the newer version of the E1401B Power Supply.
This unit comes with either ejector handles or latching handles. If a specific handle is required, please contact Artisan Technology Group Sales for pricing and availability.

View Photo of Ejector Style Handle
View Photo of Latching Style Handle

This stock-item is for the mainframe power supply only.

Part Numbers: 0950-2283, 22915300

This is the older version of the E1401B Power Supply.
This stock-item is for the mainframe power supply only.

Part Numbers: 0950-2283, 22915300
This unit is in the unopened original packaging.

Part Number: 08154-61708
This is a Terminal Block accessory for interfacing to the 'New-Style' E1476A VXI modules that are made with QUIC Rails.
This Agilent E1421B VXI Mainframe Power Supply is used and in excellent condition. This stock-item is for the mainframe power supply only. The chassis is sold separately.

Part Numbers: 0950-2283, 22915300, E1401-69203, 0950-3704

There are no SCP modules installed. Please browse our inventory here: (Item #52336) for available SCP modules.

The QUIC terminal block is sold separately.
This Keysight / Agilent E1467-80010 Screw Terminal Block for the E1467A is used and in good condition. This unit has cosmetic blemishes on the front housing; however, this does not affect its ability to function properly. It has the new-style Agilent terminal block interface (QUIC).

View Representative Photo of cosmetic blemishes.

This unit has the newer-style Agilent terminal block interface with the QUIC rails.

The Terminal Block is not included.
This is the standard 40-Pin Male to 20-Pin Female adapter.

40-Pin Male connector shown
here.
20-Pin Female connector shown here.

This product is used with:
• Agilent / HP 10085A
• Agilent / HP 10315H
• Agilent / HP E5324A-400
• Agilent / HP N1891A-K04

This unit ships in original packaging and box with standard documentation and power cord.

Part Number: E1401B-CFG001, E1401-67901
Internal ribbon cable for VXIbus modules with P2 connector is sold separately.
Option:
• 010 for the 3497A Control Unit

Part Numbers: 03497-66553, 03497-66509
This unit has the newer style ejector handles.
Product Family: 6625-01-421-7497, 6625014217497
The Agilent E1538A Enhanced Frequency/Totalize/PWM SCP has eight channels. Each of the eight channels can be individually configured to perform input or output functions. Input functions include frequency measurement and totalize, pulse width measurement, rpm, and quadrature count. Output functions can free run or can be triggered. Output functions include square waves, pulse trains, angular position pulse, and stepper motor control.

Agilent E1538A Datasheet (pdf)

This Agilent / HP 34401A 6.5 Digit Multimeter is used and in excellent condition.

Configuration:

• Rackmount Ready
This Agilent 81000KA SC Connector Adapter is used and in excellent condition.

The 81000KA provides an SC optical connector interface.
This Agilent / HP 81003LA - LC Connector Adapter is used and in excellent condition.

Threaded adapter for 8152x Optical Heads, 8162x Optical Heads with 81624DD and High Power Optical Heads

This Agilent E1467A 8 x 32 Relay Matrix Switch is used, and in excellent condition. It has the newer-style Agilent terminal block interface with the QUIC rails.

The Terminal Block is sold separately.

Part Number: E1466-66202

This Agilent E8403A 13-Slot, High-Power VXI Mainframe is used and in excellent condition.
There are no SCP modules installed. Please browse our inventory here: (Item #52336) for available SCP modules.
Product Family: 7025-01-491-6218, 7025014916218
The Agilent E1503A 8-Channel Programmable Filter and Gain SCP provides eight programmable, 2-pole low-pass filters with cutoff frequency settings of 2, 10, and 100 Hz, as well as a 1.5 kHz "pass-through" mode (filter OFF). The eight programmable input amplifiers provide input voltage ranges of ± 0.25 V, ± 2 V, and ± 16 V. The E1503A SCP also provides input over-voltage protection and open transducer detection on each channel.

Agilent E1503A Datasheet (pdf)
Agilent E1503A Manual (pdf)

Part Number: E1413-66513, E1413-66713, E1413-63513
Product Family: 5998-01-484-1063, 5998014841063

Configuration: Opt. 003 (16-Channel, Isolated). It has the newer-style Agilent terminal block interface with the QUIC rails.

The Terminal Block is not included.
This Agilent / HP 11896A Polarization Controller is used and in excellent condition. Optical connector interface: PC.

This instrument includes the standard Agilent optical interface (View Photo). The Agilent 81000xI Series optical interface connectors are sold separately. They are available for purchase from our website here: (Item #50516)

This unit has never been used and has come from storage. Being stored and stacked outside of the manufacturer's packaging has resulted in some minor visual defects such as scratches. A close inspection shows these units to be unused and unpowered surplus stock. A great buy if you don't require the original cardboard box, technical documentation, and do not mind a couple cosmetic scuffs.
This unit has the newer-style Agilent terminal block interface with the QUIC rails.

The Terminal Block is sold separately.

Part Number: E1466-66202
This unit has a 2.2mm keying slot.

Part Number: 08154-61722
Configuration:
• Installed Memory: 4 MB RAM

We can increase the size of the memory installed on this module (up to 64 MB) for a nominal fee.

This unit is in the unopened original packaging. This unit has a 2.2mm keying slot.

Part Number: 08154-61722

Included Accessories:
• (2) Ribbon Cables - 60-Pin Female to Unterminated Wires

Part Number: E1330-66521
Configuration:
• Has protective bumpers and carrying handle
This Agilent / HP 11982A Amplified Lightwave Converter is used, and in excellent condition. Optical connector interface: PC.

This instrument includes the standard Agilent optical interface (View Photo). The Agilent 81000xI Series optical interface connectors are sold separately. They are available for purchase from our website here: (Item #50516).

Total Outputs: 4
(2) 0-7V, 0-5A or 0-20V, 0-2A
(2) 0-20V, 0-2A or 0-50V, 0-0.8A
This Agilent 8163A Lightwave Multimeter Mainframe System is used and in excellent condition. All of our 8163A Mainframes are upgraded to the latest Agilent Firmware Rev. prior to shipping.

Configuration: Benchtop w/ Instrument Handle

It has the newer-style Agilent terminal block interface with the QUIC rails. The QUIC Terminal Block is not included.
This Agilent E1473A RF Multiplexer Expander is used, and in excellent condition.
Terminal Block / DC Module sold separately.

Output Ratings at 40°C
• Output voltage: 0 to 35 V
• Output current: 0 to 4.5 A

• Maximum power: 150 W

Configuration:
• Input Voltage: 120 VAC Only
• Frequency: 60 Hz
• HPIB Connection

• Internally Connected DVM

For a rear photo of the unit, please click here.

The Agilent / HP 3497A Series Data Acquisition/Control Unit Mainframe provides the interfacing, power supplies, and support structure for optional plug-in cards and assemblies. It is also the interfacing means between the 3498A Extender and a controller.

Local control is accomplished by using the 3497A's standard front panel. This front panel has an alphanumeric keyboard for programming the scanner and a display for showing measurement results, status, etc. The front panel does not affect the remote control capabilities of the 3497A, and it also has an audible and programmable alarm (beeper).

This unit has the older-style Agilent terminal block interface (non-QUIC).

The Terminal Block is not included.
Configuration:

• Voltage Range: 0 V to 60 V
• Current Range 0 A to 50 A

• Voltage Programming Accuracy: 0.035%, +40 mV
• Current Programming Accuracy: 0.2%, +85 mA
• Voltage RMS: 8 mV
• Voltage Peak-to-Peak: 40 mV
• Current RMS: 25 mA
• Voltage Readback Accuracy: 0.08%, +20 mV
• Current Readback Accuracy: 0.36%, +35 mA

Part Number: E8311-44311, E8311A-ATO-22999
Product Family: 6625-01-562-4834, 6625015624834
According to Agilent's E1339A/Z2309A Manual, pg 26, these two cards are identical.

Part Numbers: Z2309-66501
Product Family: 6625-01-433-5713, 6625014335713
This has the newer-style Agilent terminal block interface with the QUIC rails.

The Terminal Block is included.
This Keysight / Agilent E8404A High-Power VXI Mainframe is used and in excellent condition.
Features:

• Five Plug-In Slots
• Full Rack Width
This Agilent 81000FA FC Connector Adapter is used and in excellent condition.

The 81000FA provides an FC optical connector interface.
The 34901A module for the 34970A Data Acquisition/Switch Unit is a general purpose scanning module. It combines dense, multi-function switching with 60 channel/second scan rates to address a broad spectrum of data acquisition applications.

Part Number: 34901-66501

This unit has the older-style Agilent terminal block interface (non-QUIC).

The Terminal Block is sold separately.

Part Number: E1466-66201
This Agilent 81000KA SC Connector Adapter is in the in the original, unopened packaging.

The 81000KA provides an SC optical connector interface.
This unit is in the unopened original packaging. This unit has a 2.0mm keying slot.

Part Number: 08154-61723
This has the newer-style Agilent terminal block interface with the QUIC rails.

The Terminal Block is sold separately.
This Agilent / HP 81689A is used, and in excellent condition. It includes option 021 (SM fiber, straight contact output).

Measured Maximum Output Power (Across Spectrum): ≥ 6 dBm


This instrument includes the standard Agilent optical interface (View Photo). The Agilent 81000xI Series optical interface connectors are sold separately. They are available for purchase from our website here: (Item #50516).

Configuration:
Number of Channels (max): 24
Number of Channels - Unshared Relays: 24
Maximum Current Per Channel: 3 A
Current Measuring with Sense Resistor: No

Current Measuring with Current Transducer: No
Flyback Protection: No
Engineered for Application: Low Current

Part Number: E3750-66505

This Keysight / Agilent E1440A Synthesized Function/Sweep Generator is used and in excellent condition.
Product Family: 6625-01-440-5670, 6625014405670
This unit includes the VXI-Card, Screw Terminal Block (E1364-TERM).
The Agilent E1502A 8-Channel Low-Pass Filter SCP provides eight fixed, 2-pole, low-pass filters with a 3 dB cutoff frequency of 7 Hz. It also provides input over-voltage protection and open transducer detection on each channel.

Agilent E1502A Datasheet (pdf)

Part Numbers: E1413-66512, E1413-63512
Product Family: 5998-01-569-8486, 5998015698486

The Agilent E1505A 8-Channel Current Source SCP provides eight current sources programmable to one of two current levels. Each current source can be programmed to provide either 30 mA or 488 mA. The E1505A SCP is used to supply excitation current to resistance and resistance-temperature measurements. It also provides over-voltage protection on each channel.

Agilent E1505A Datasheet (pdf)
Agilent E1505A Manual (pdf)

Part Number: E1413-63515
Product Family: 5998-01-484-1072, 5998014841072

This Agilent E1426A Digitizing Oscilloscope 500 MHz is used, and in excellent condition.
Product Family: 6625-01-370-4994, 6625013704994
Part Number: E1364-66501, E1364-66511, E1364-66201, 2934A04212
The Agilent E1501A Direct Input (>100 kHz BW) Signal Conditioning Plug-on, the most basic of Agilent Technologies' SCPs, provides eight hardwired paths that buffer the input signal. Each path has input over-voltage protection and open transducer detection.

Agilent E1501A Datasheet (pdf)
Agilent E1501A Manual (pdf)

Part Number: E1413-63511

Product Family: 5998-01-507-3533, 5998015073533

This Keysight / Agilent E4418B EPM Series Single Channel Power Meter Front Panel is used and in excellent condition. This unit includes the Power REF rear connection as viewed in photo below.

View Photo of internal components.

Part Number(s): E4418-61001, E4418-61030, E4418-69031


This unit come with either ejector handles or latching handles. If a specific handle is required, please contact Artisan Technology Group Sales for pricing and availability.

View Photo of Ejector Style Handle
View Photo of Latching Style Handle

This Agilent / HP Dual Channel 50GHz Module is used and in excellent condition.
Configuration:
• Input Voltage: 100-120/220-240 VAC
• Output Power: 100 W
This Agilent E6234A VXI Pentium PC Controller is new from surplus stock. Typically these systems have varying operating systems installed. Please contact an Artisan Technology Group Sales Associate if a specific operating systems is required.

Configuration:

• Processor: 166 MHz Intel Pentium Processor
• Hard Drive Size Range: 1 GB - 10 GB*
• Memory Size Range: 16 MB - 128 MB*
• 1.44 MB Floppy
• HP-22/EXM-22 GPIB Card Installed
• PS/2 Keyboard and Mouse, COM (Serial Mouse), USB, Ethernet, Monitor, SCSI, and LPT interfaces

*If a specific Hard Drive or Memory Size is required, please contact Artisan Technology Group Sales for pricing and availability. Otherwise, Hard Drive and Memory sizes will be within the specified range.

This backplane is used in the E1401B, E1401T and E4210B mainframes.

Part Number: 315-00078R5, 3406-01-HPL
The Connection Terminal Block is sold separately.

Part Number: 44470-66501, 44470-66511
This Agilent 81525A High Power Optical Head is used, and in excellent condition. This module interfaces only with Agilent's 81533B Optical Head interface module.
Showing 1-100 of 4463 Results
Contact Us
Fax:

(240) 376-1381