Piezosystem Jena Tritor 100 Micro/Nano XYZ Positioner Stage and NV 40/3S Controller

Piezosystem Jena Tritor 100 Micro/Nano XYZ Positioner Stage and NV 40/3S Controller



This Piezosystem Jena Tritor 100 Micro/Nano XYZ Positioner Stage and NV 40/3S Controller is used and in excellent condition.



Have a quote from somewhere else? Click Here
Stock # 45238-1
Quick Quote
Sell Yours
Repair Quote
  • More Info
  • Tech Specs
  • Additional Photos
  • Datasheets / Manuals 
  • View It Live Request 
Contact Us
Share:
Piezosystem Jena Tritor 100 Micro/Nano XYZ Positioner Stage and NV 40/3S Controller

Features
  • 3-Channel Mico/Nano Positioning System
  • NV40 / 3S Low-Noise Controller
  • RS232 Interface
  • Tritor 100 XYZ Nanopositioning Stage
  • At Least 100um travel in all Axis

Description

NV 40/3S Piezosystem Jena Controller
The resolution of piezoelectrical elements is almost always determined by the signal-to-noise ratio of the power supply. The better the signal-to-noise ratio, the higher the resolution of the piezoelectrical elements. This factor was the main consideration during the development of the NV 40/3S power supply. Minimum noise and high stability of the output voltage are the most important features of this power supply.
The NV 40/3S is a highly cost effective power supply due to its compact design, and construction without expensive modular electronics.
- separate display for each channel
- excellent signal-to-noise ratio for the highest resolution
- RS 232 serial port
- modulation input
- 10 turn potentiometer for fine adjustment


TRITOR 100; XYZ-Nanopositioning
Piezosystem Jena’s unique TRITOR elements are extremely compact but offer motions of up to 100 µm in all three axes. Parallel motion is achieved without play due to the mechanical design.
· highly compact design results in superior performance
· accurate parallel motion by parallelogram design
· high reliability due to solid state hinges
· motion without mechanical play
· high resolution in nm and sub-nm range
· motion up to 100 µm
· precision pin holes


Important Notice: Please note that any additional items included with this equipment such as accessories, manuals, cables, calibration data, software, etc. are specifically listed in the above stock item description and/or displayed in the photos of the equipment. Please contact one of our Customer Support Specialists if you have any questions about what is included with this equipment or if you require any additional information.


Contact Us
Share:

Specifications

+NV 40/3S Controller
Number of Channels3
Computer InterfaceRS-232; Serial
Resolution12-bit
Main Voltage120VAC
Output Power (each channel)6W
Output Voltage -10 to +150 V
Output Current (each channel)40mA
Bandwidth 350 Hz
Modulation Input0-10V BNC
Input Resistance1kohm
DC Offset10-Turn Potentiometer; Full Range
Voltage DisplayLED; 3-digit
Output ConnectorLEMOSA
+Tritor 100
Motion in X,Y,Z100um
Capacitance (each axis)1.7 uF
Voltage-10 to 150V


Contact Us
Share:

Item Images

Click a thumbnail to view larger image:

Piezosystem Jena Tritor 100 Micro/Nano XYZ Positioner Stage and NV 40/3S Controller


Contact Us
Share:
Manuals, Datasheets, Drivers, Links

Link to Piezosystem Jena Website 


Contact Us
Share:

View It Live

View equipment LIVE - Before you buy!

InstraView™ Equipment Inspection



Buying used equipment doesn't always have to be a shot in the dark. We know there are plenty of differences when it comes to used equipment and quite often, choosing between different pieces is difficult, especially when the equipment is not sitting right in front of you.

Well, what if you were able to see a piece of equipment before you purchased it? Not just a picture from the manufacturer's website, but the actual piece of equipment you would receive.
With InstraView™, we move you one step closer to inspecting the equipment you're interested in without having to wait for the equipment to show up at your door.

InstraView™ works in your web browser and allows you to view the actual piece of equipment you're interested in before purchasing. You can zoom in close to see the labels with the serial number or zoom out to see the overall condition of the equipment.

It's like having the store come to you!


InstraView Request Form

To get started:

  1.   Fill in the request form below
  2.   We'll send you an email letting you know exactly when your piece of equipment will be available for viewing

Name:
Email:
Item to Inspect: 45238-1 - Piezosystem Jena Tritor 100 Micro/Nano XYZ Positioner Stage and NV 40/3S Controller


All you need is a web browser (ie. Microsoft Internet Explorer or Netscape) and Sun's Java Runtime Environment installed. If you need to install the Sun Java Runtime, you may download the latest Java SE Runtime Environment (JRE) http://www.oracle.com/technetwork/java/javase/downloads/index.html