Parker / Compumotor S8 High Current Option Microstepping System
  • Parker_Compumotor_S8_High_Current_Option_View1_2016101895347
  • Parker_Compumotor_S8_High_Current_Option_View2_2016101895347
  • Parker_Compumotor_S8_High_Current_Option_View3_2016101895347
  • Parker_Compumotor_S8_High_Current_Option_View4_2016101895347

Parker / Compumotor S8 High Current Option Microstepping System



The S series instruments are advanced step and direction input drives. This unit comes with the optional fan kit installed. The S8 Drive can be configured by on-board switches to be any of the following models:

S106-178, S106-205, S106-250

If you would like an ATG technician to set the switches to configure the S8 to one of these particular models, please let us know when placing the order.

Input Voltage: 120 V




Stock # 58510-19
In Stock: Yes
Price: Contact Us
  • More Info
  • Tech Specs
  • Additional Photos
  • Datasheets / Manuals 
  • View It Live Request 
Contact Us
Share:
Parker / Compumotor S / SX / SXF Series Packaged Microstepping Systems

Features
  • Torques from 65 to 1,900 oz-in
  • Speeds to 50 rps (3,000 rpm) Continuous
  • 16 User Selectable Motor Resolutions to 50,800 Steps/re
  • Three-State Current Control for Reduced Motor Heating
  • User-Selectable Current Waveform for Smooth Operation
  • Zero Phase Input Resets Phase Currents to the Power Up Positions
  • Fault Output for Remote Signaling and Diagnostics
  • Optically Isolated Step and Direction, Shutdown and Zero Phase Inputs
  • Anti-Resonance Eliminates Mid-Range Instability

Description

The Parker/Compumotor S Family of drives and drive/indexer systems are designed for reliability and offer top quality performance. The S Series is a step and direction input drive, the SX Series is a drive/indexer, and the SXF is a drive/indexer with encoder following. These products perform registration moves and are equipped to provide complex move profiling. The SX and SXF utilize the latest X-language enhancements and are easily programmed over an RS-232C interface.

Common features of these drives and drive/indexer systems include the following:
• Torques from 65 to 1,900 oz-in
• Speeds to 50 rps (3,000 rpm) continuous
• 16 user selectable motor resolutions to 50,800 steps/rev
• Three-state current control for reduced motor heating
• User-selectable current waveform for smooth operation
• Zero phase input resets phase currents to the power up positions
• Fault output for remote signalling and diagnostics
• Optically isolated step and direction, shutdown and zero phase inputs
• Anti-resonance eliminates mid-range instability
• Fully short circuit protected—phase-to-phase and phase-to-ground with no time limit
• Enclosed to prevent contaminants from entering the drive enclosure
• Power dump circuitry protects the drive from large inertial loads
• RP240 remote panel interface
• Nine motors with 10 foot motor cables. Available in 23, 34 and 42 frame sizes
• Drive status indicators; power, step input, under-voltage, over-voltage and motor fault

In addition to these common features, the SX Series has the following:
• Extended edition of X programming language
• Motion calculation delay times as low as 500 microseconds
• Conditional branching commands
• Separate acceleration and deceleration commands
• 50 user defined variables
• Registration input

The SXF Series includes the common features, all the SX features, and the following:
• Encoder following controls speed and position of a slave axis based on speed and position of master axis encoder
• Synchronizes speed and position based on registration marks
• Change ratios “on the fly,” complex motion profiling


Product Family: S-Drive, SDrive, S6-Drive, S6Drive, SX-Drive, SXDrive, SX6-Drive, SX6Drive, S8-Drive, S8Drive, SX8-Drive, SX8Drive, SXF6Drive, SXF6-Drive, SXF8Drive, SXF8-Drive, S3Drive, S3-Drive


Important Notice: Please note that any additional items included with this equipment such as accessories, manuals, cables, calibration data, software, etc. are specifically listed in the above stock item description and/or displayed in the photos of the equipment. Please contact one of our Customer Support Specialists if you have any questions about what is included with this equipment or if you require any additional information.


Contact Us
Share:

Specifications

Contact Us
Share:

Item Images

Click a thumbnail to view larger image:

Parker / Compumotor S / SX / SXF Series Packaged Microstepping Systems


Contact Us
Share:

View It Live

View equipment LIVE - Before you buy!

InstraView™ Equipment Inspection



Buying used equipment doesn't always have to be a shot in the dark. We know there are plenty of differences when it comes to used equipment and quite often, choosing between different pieces is difficult, especially when the equipment is not sitting right in front of you.

Well, what if you were able to see a piece of equipment before you purchased it? Not just a picture from the manufacturer's website, but the actual piece of equipment you would receive.
With InstraView™, we move you one step closer to inspecting the equipment you're interested in without having to wait for the equipment to show up at your door.

InstraView™ works in your web browser and allows you to view the actual piece of equipment you're interested in before purchasing. You can zoom in close to see the labels with the serial number or zoom out to see the overall condition of the equipment.

It's like having the store come to you!


InstraView Request Form

To get started:

  1.   Fill in the request form below
  2.   We'll send you an email letting you know exactly when your piece of equipment will be available for viewing

Name:
Email:
Item to Inspect: 58510-19 - Parker / Compumotor S8 High Current Option Microstepping System


All you need is a web browser (ie. Microsoft Internet Explorer or Netscape) and Sun's Java Runtime Environment installed. If you need to install the Sun Java Runtime, you may download the latest Java SE Runtime Environment (JRE) http://www.oracle.com/technetwork/java/javase/downloads/index.html