National Instruments UMI-7764 Universal Motion Interface
  • NationalInstruments_UMI7764_UaE_View1
  • NationalInstruments_UMI7764_UaE_View2
  • NationalInstruments_UMI7764_UaE_View3
  • NationalInstruments_UMI7764_UaE_View4

National Instruments UMI-7764 Universal Motion Interface



Configuration:
• Axes: 4
• Inputs: Quadrature, Incremental
• Single-Ended Input Threshold: TTL/CMOS
• Range: 0 to 5 VDC
• Maximum Quadrature Frequency: 20 MHz
• Compatibility: Single Pass-Through

Part Number: 186343C-01, 186343C-02, 777978-02




Have a quote from somewhere else? Click Here
Stock # 61364-3
Quick Quote
Sell Yours
Repair Quote
  • More Info
  • Tech Specs
  • Additional Photos
  • Datasheets / Manuals 
  • View It Live Request 
Contact Us
Share:
National Instruments UMI-7764 / UMI-7772 / UMI-7774 Universal Motion Interfaces

Features
  • 2 and 4 Axis Univeral Motion
  • Per-Axis Motion Signal
  • Screw Terminal Connectors
  • Up to 20 MHz Quadrature Encoder Rates
  • Built-in Inhibit Logic

Description

These National Instruments UMI interfaces provide a comprehensive wiring and connection point for motion control and feedback signals. A single cable from the motion controller to the UMI carries input and output signals for all axes. By dividing these signals into per-axis and function-specific connections, the UMI interface simplifies integration of third-party drivers, amplifiers, encoders, limits, and I/O with NI controllers. Each UMI works with up to 20 MHz quadrature encoder rates.

Each UMI incorporates a host PC power monitor that inhibits the motion driver if the host PC loses power during motion control. The UMI monitors the +5 VDC from the PC and activates the inhibit signals if the voltage falls out of tolerance.

Enhanced motion-specific features set the UMI apart from simple connector-only screw terminal blocks. Compatibility with both TTL and differential encoders, input filtering, host-PC power monitoring, onboard inhibit functionality, and compact size make the UMI the ideal motion interface solution. The result is simplified wiring to third-party amplifier/driver and motor components.


Product Family: UMI-7764, UMI-7774, UMI-7772, UMI7764, UMI7774, UMI7772, UMI 7764, UMI 7774, UMI 7772, 777978-02, 778558-01, 778556-01


Important Notice: Please note that any additional items included with this equipment such as accessories, manuals, cables, calibration data, software, etc. are specifically listed in the above stock item description and/or displayed in the photos of the equipment. Please contact one of our Customer Support Specialists if you have any questions about what is included with this equipment or if you require any additional information.


Contact Us
Share:

Specifications

Contact Us
Share:

Item Images

Click a thumbnail to view larger image:

National Instruments UMI-7764 / UMI-7772 / UMI-7774 Universal Motion Interfaces
Front View
National Instruments UMI-7764 / UMI-7772 / UMI-7774 Universal Motion Interfaces
Front Angled View
National Instruments UMI-7764 / UMI-7772 / UMI-7774 Universal Motion Interfaces
Back View
National Instruments UMI-7764 / UMI-7772 / UMI-7774 Universal Motion Interfaces
Back Angled View


Contact Us
Share:

View It Live

View equipment LIVE - Before you buy!

InstraView™ Equipment Inspection



Buying used equipment doesn't always have to be a shot in the dark. We know there are plenty of differences when it comes to used equipment and quite often, choosing between different pieces is difficult, especially when the equipment is not sitting right in front of you.

Well, what if you were able to see a piece of equipment before you purchased it? Not just a picture from the manufacturer's website, but the actual piece of equipment you would receive.
With InstraView™, we move you one step closer to inspecting the equipment you're interested in without having to wait for the equipment to show up at your door.

InstraView™ works in your web browser and allows you to view the actual piece of equipment you're interested in before purchasing. You can zoom in close to see the labels with the serial number or zoom out to see the overall condition of the equipment.

It's like having the store come to you!


InstraView Request Form

To get started:

  1.   Fill in the request form below
  2.   We'll send you an email letting you know exactly when your piece of equipment will be available for viewing

Name:
Email:
Item to Inspect: 61364-3 - National Instruments UMI-7764 Universal Motion Interface


All you need is a web browser (ie. Microsoft Internet Explorer or Netscape) and Sun's Java Runtime Environment installed. If you need to install the Sun Java Runtime, you may download the latest Java SE Runtime Environment (JRE) http://www.oracle.com/technetwork/java/javase/downloads/index.html