Delta Tau PMAC-Lite 4-Axis Motor Controller
  • delta_tau_pmac_lite_view1

Delta Tau PMAC-Lite 4-Axis Motor Controller

Features

  • A Single Differential 16-bits DAC Output
  • Amplifier Enable Output
  • One Quadrature Incremental Encoder Input
  • Four Dedicated Flag Inputs: 2 End-of-Travel Limits, 1 Home and 1 Amplifier Fault

View our selection of these items below.


Have a quote from somewhere else? Click Here




Contact Us
Share:



This Delta Tau PMAC-Lite 4-Axis Motor Controller is used and in excellent condition. This unit has Option 4A installed. This unit does not have a faceplate.

Option 4A:

• Optional CPU section with 20 MHz CPU, 128K x 24 bit zero-wait-state Static RAM, 4 Mbit flash ROM for firmware and user program storage (no battery), on-board buffers for expansion port. Provides approximately 25% computational speed increase over base version.

Part Number: 602402-101



Stock # 61793-6




This Delta Tau PMAC-Lite 4-Axis Motor Controller is used and in excellent condition.

Part Number: 602402-101



Stock # 61793-1




This Delta Tau PMAC-Lite 4-Axis Motor Controller is used and in excellent condition. This unit has Option 5A installed. This unit does not have a faceplate.

Option 5A:

• Optional CPU section with 40 MHz CPU, 128K x 24 bit zero-wait-state Static RAM, 4 Mbit flash ROM for firmware and user program storage (no battery), on-board buffers for expansion port. Provides approximately 125% computational speed increase over base version.

Part Number: 602402-101



Stock # 61793-5



  • Description
  • Tech Specs
  • Datasheets / Manuals 
Contact Us
Share:

Description

The Universal PMAC-Lite 4-Axis Motor Controller can be programmed to control the motion of up to four motors in any coordinated fashion, either independently of each other or coordinated with, for example, linear or circular interpolation.

The Universal PMAC-Lite is not only a sophisticated motion controller but it is also a PLC device(Programmable Logic Controller). PLC programs in PMAC run independently of each other and of motion programs and can be tightly synchronized to the motion sequence.

The Universal PMAC-Lite can be installed inside a computer on an ISA bus type and can be programmed through bus communications. Alternatively, it can be installed in a stand-alone configuration outside the computer and programmed using serial communications. Either RS-232 or RS-422 serial communications are supported.

Product Family: PMAC-Lite, PMAC Lite, PMACLite, DeltaTau
Contact Us
Share:

Specifications

Contact Us
Share:

Resources

Manuals, Datasheets, Drivers, Links

Delta Tau PMAC-Lite Hardware Reference Manual (pdf) 
Link to Delta Tau Website