Parker / Compumotor 372 Indexer

Parker / Compumotor 372 Indexer

This Parker Compumotor 372 Indexer is used and in excellent condition.

Have a quote from somewhere else? Click Here
Stock # 62378-1
Quick Quote
Sell Yours
Repair Quote
  • More Info
  • Tech Specs
  • Additional Photos
  • Datasheets / Manuals 
  • View It Live Request 
Contact Us
Parker / Compumotor 372 Indexer

  • Preprogrammed Operations Using Discrete Commands
  • Nonvolatile Memory Commands
  • Position Tracking and IEEE-488 Options
  • ±0 Stepping Accuracy from Preset Total
  • ±0.02% Velocity Accuracy of Set Rate
  • ±0.02%Velocity Repeatability of Set Rate above 0.01 rev/sec


The Parker/Compumotor 372 indexer is a microprocessor based programable pulse generator for the control of pulsed motor and drive systems. Using the RS-232C interface, it can be programmed to operate independently. It can also be controlled remotely. This indexer provides precision control for motor drive amplifiers that convert pulses to motor position. The 372 Indexer will drive any size Compumotor motor/drive system.

The 372 can connect to an RS-232C interface to allow up to 8 indexers to be controlled from the same Console device. This indexer can be controlled "live" or often used functions can be programmed into non-volatile memory.

Product Family: 372 Indexer, 372Indexer, 372-Indexer, Parker 372, Parker 372 Indexer, Parker 372-Indexer

Important Notice: Please note that any additional items included with this equipment such as accessories, manuals, cables, calibration data, software, etc. are specifically listed in the above stock item description and/or displayed in the photos of the equipment. Please contact one of our Customer Support Specialists if you have any questions about what is included with this equipment or if you require any additional information.

Contact Us


PowerInput: 100 - 130 VAC at 0.25 A, 50/60 Hz
Output: +5 VDC, 0.250 A
RS-232C Interface3-wire DCE Configuration
±5 VDC, 2 mA
Step Pulse Widths4096 to 50,000 steps/rev: 1 microsec
1000 step/rev: 5 microsec
200 and 400 steps/rev: 15 microsec
Auxiliary InputsOn current: 10 mA min, 50 mA max.
voltage: 3.2 vdc min, 10VDC max.
Start and StopMinimum signal duration: 100 usec
CW, CCW Limit10 mA sink to DC common required
Input Impedance1 Kohm
Maximum Frequency100 kHz
Maximum Input Voltage5 VDC
Turn on Voltage2.5 VDC
Turn off Voltage2.0 VDC

Contact Us

Item Images

Click a thumbnail to view larger image:

Parker / Compumotor 372 IndexerParker / Compumotor 372 IndexerParker / Compumotor 372 Indexer
Parker / Compumotor 372 Indexer

Contact Us
Manuals, Datasheets, Drivers, Links

Parker Compumotor 372 Indexer Manual (pdf) 
Link to Parker / Compumotor Website 

Contact Us

View It Live

View equipment LIVE - Before you buy!

InstraView™ Equipment Inspection

Buying used equipment doesn't always have to be a shot in the dark. We know there are plenty of differences when it comes to used equipment and quite often, choosing between different pieces is difficult, especially when the equipment is not sitting right in front of you.

Well, what if you were able to see a piece of equipment before you purchased it? Not just a picture from the manufacturer's website, but the actual piece of equipment you would receive.
With InstraView™, we move you one step closer to inspecting the equipment you're interested in without having to wait for the equipment to show up at your door.

InstraView™ works in your web browser and allows you to view the actual piece of equipment you're interested in before purchasing. You can zoom in close to see the labels with the serial number or zoom out to see the overall condition of the equipment.

It's like having the store come to you!

InstraView Request Form

To get started:

  1.   Fill in the request form below
  2.   We'll send you an email letting you know exactly when your piece of equipment will be available for viewing

Item to Inspect: 62378-1 - Parker / Compumotor 372 Indexer

All you need is a web browser (ie. Microsoft Internet Explorer or Netscape) and Sun's Java Runtime Environment installed. If you need to install the Sun Java Runtime, you may download the latest Java SE Runtime Environment (JRE)