Kollmorgen / Pacific Scientific / IMEC SC403-030-T4 Brushless Servo Controller

Kollmorgen / Pacific Scientific / IMEC SC403-030-T4 Brushless Servo Controller



This Danaher Motion / Pacific Scientific / IMEC SC403-030-T4 Brushless Servo Controller is new from surplus stock.

SC403-030-T4 Configuration:
• Power Level: 15A Peak, 7.5A Continuous
• T4, Tachsyn Processor, 4.0V/Krpm tach gradient

SC403 Specifications:
• Input Voltage: 115/230 VAC, 1 or 3 phase, 47-63Hz
• Bus Voltage (230 VAC Input): 320 VDC
• Bus Voltage (115 VAC Input): 160 VDC
• Output Current (Peak): 15A
• Output Current (Continuous, Stall, 230 VAC): 7.5A
• Output Current (Continuous, Stall, 115 VAC): 7.5A
• Output Power (Peak, 230 VAC Input): 4500 W
• Output Power (Peak, 115 VAC Input): 2250 W
• Output Power (Continuous, Stall, 230 VAC Input, 3-Phase Input): 2250 W
• Output Power (Continuous, Stall, 230 VAC Input, 1-Phase Input): 1575 W
• Output Power (Continuous, Stall, 230 VAC Input, 1-Phase Input): 800 W
• Form Factor: <1.01
• Current Loop Bandwidth: 3 kHz max.
• Velocity Offset: Adjustable to zero
• Velocity Input Command: ±10V




Have a quote from somewhere else? Click Here
Stock # 66566-1
In Stock: Yes
Price: Contact Us
Quick Quote
Sell Yours
Repair Quote
  • More Info
  • Tech Specs
  • Additional Photos
  • Datasheets / Manuals 
  • View It Live Request 
Contact Us
Share:
Kollmorgen / Pacific Scientific / IMEC 400 Series Brushless Servo Controller

Features
  • Transformerless, Direct 115/230 VAC Line Operation
  • Magnetically/Optically Isolated Output Stage
  • MOV Protected Input Circuitry
  • Integral Fusing
  • Wide Velocity Loop Dynamic Range Adjustment
  • Peak Current Limit Adjustment

Description

The Danaher Motion / Pacific Scientific / IMEC 400 Series Brushless Servo Controllers are designed to operate Pacific Scientific Brushless Servo Motors or other 3-phase, Permanent Magnetic (PM) Brushless Servo motors. Each controller is an independent stand-alone unit capable of four quadrant control of a single PM Brushless Servo motor. The controller can be configured with a Brushless Servo motor as either a torque block or, if the motor is equipped with a Tachsyn, as a velocity block. The controller employs high-frequency PWM current control to achieve high quality servo performance. Multiple protection circuits and careful design insure trouble-free operation.


Product Family: SC403-030-T4, SC403 030 T4, SC403030T4, SC403030 T4


Important Notice: Please note that any additional items included with this equipment such as accessories, manuals, cables, calibration data, software, etc. are specifically listed in the above stock item description and/or displayed in the photos of the equipment. Please contact one of our Customer Support Specialists if you have any questions about what is included with this equipment or if you require any additional information.


Contact Us
Share:

Specifications

Contact Us
Share:

Item Images

Click a thumbnail to view larger image:

Danaher Motion / Pacific Scientific / IMEC 400 Series Brushless Servo Controller
SC403-030-T4
Danaher Motion / Pacific Scientific / IMEC 400 Series Brushless Servo Controller
SC403-030-T4
Danaher Motion / Pacific Scientific / IMEC 400 Series Brushless Servo Controller
SC403-030-T4


Contact Us
Share:

View It Live

View equipment LIVE - Before you buy!

InstraView™ Equipment Inspection



Buying used equipment doesn't always have to be a shot in the dark. We know there are plenty of differences when it comes to used equipment and quite often, choosing between different pieces is difficult, especially when the equipment is not sitting right in front of you.

Well, what if you were able to see a piece of equipment before you purchased it? Not just a picture from the manufacturer's website, but the actual piece of equipment you would receive.
With InstraView™, we move you one step closer to inspecting the equipment you're interested in without having to wait for the equipment to show up at your door.

InstraView™ works in your web browser and allows you to view the actual piece of equipment you're interested in before purchasing. You can zoom in close to see the labels with the serial number or zoom out to see the overall condition of the equipment.

It's like having the store come to you!


InstraView Request Form

To get started:

  1.   Fill in the request form below
  2.   We'll send you an email letting you know exactly when your piece of equipment will be available for viewing

Name:
Email:
Item to Inspect: 66566-1 - Kollmorgen / Pacific Scientific / IMEC SC403-030-T4 Brushless Servo Controller


All you need is a web browser (ie. Microsoft Internet Explorer or Netscape) and Sun's Java Runtime Environment installed. If you need to install the Sun Java Runtime, you may download the latest Java SE Runtime Environment (JRE) http://www.oracle.com/technetwork/java/javase/downloads/index.html