Danaher Motion / Pacific Scientific / IMEC 400 Series Brushless Servo Controller
  • IMEC_SC403_030_T4_View3
  • IMEC_SC403_030_T4_View2
  • IMEC_SC403_030_T4_View1

Danaher Motion / Pacific Scientific / IMEC 400 Series Brushless Servo Controller

Features

  • Transformerless, Direct 115/230 VAC Line Operation
  • Magnetically/Optically Isolated Output Stage
  • MOV Protected Input Circuitry
  • Integral Fusing
  • Wide Velocity Loop Dynamic Range Adjustment
  • Peak Current Limit Adjustment

View our selection of these items below.


Have a quote from somewhere else? Click Here




Contact Us
Share:



This Danaher Motion / Pacific Scientific / IMEC SC403-030-T4 Brushless Servo Controller is used and in excellent condition.

SC403-030-T4 Configuration:
• Power Level: 15A Peak, 7.5A Continuous
• T4, Tachsyn Processor, 4.0V/Krpm tach gradient

SC403 Specifications:
• Input Voltage: 115/230 VAC, 1 or 3 phase, 47-63Hz
• Bus Voltage (230 VAC Input): 320 VDC
• Bus Voltage (115 VAC Input): 160 VDC
• Output Current (Peak): 15A
• Output Current (Continuous, Stall, 230 VAC): 7.5A
• Output Current (Continuous, Stall, 115 VAC): 7.5A
• Output Power (Peak, 230 VAC Input): 4500 W
• Output Power (Peak, 115 VAC Input): 2250 W
• Output Power (Continuous, Stall, 230 VAC Input, 3-Phase Input): 2250 W
• Output Power (Continuous, Stall, 230 VAC Input, 1-Phase Input): 1575 W
• Output Power (Continuous, Stall, 230 VAC Input, 1-Phase Input): 800 W
• Form Factor: < />
• Current Loop Bandwidth: 3 kHz max.
• Velocity Offset: Adjustable to zero
• Velocity Input Command: ±10V






This Danaher Motion / Pacific Scientific / IMEC SC403-030-T4 Brushless Servo Controller is new from surplus stock.

SC403-030-T4 Configuration:
• Power Level: 15A Peak, 7.5A Continuous
• T4, Tachsyn Processor, 4.0V/Krpm tach gradient

SC403 Specifications:
• Input Voltage: 115/230 VAC, 1 or 3 phase, 47-63Hz
• Bus Voltage (230 VAC Input): 320 VDC
• Bus Voltage (115 VAC Input): 160 VDC
• Output Current (Peak): 15A
• Output Current (Continuous, Stall, 230 VAC): 7.5A
• Output Current (Continuous, Stall, 115 VAC): 7.5A
• Output Power (Peak, 230 VAC Input): 4500 W
• Output Power (Peak, 115 VAC Input): 2250 W
• Output Power (Continuous, Stall, 230 VAC Input, 3-Phase Input): 2250 W
• Output Power (Continuous, Stall, 230 VAC Input, 1-Phase Input): 1575 W
• Output Power (Continuous, Stall, 230 VAC Input, 1-Phase Input): 800 W
• Form Factor: < />
• Current Loop Bandwidth: 3 kHz max.
• Velocity Offset: Adjustable to zero
• Velocity Input Command: ±10V






This Danaher Motion / Pacific Scientific / IMEC SC402-016-T4 Brushless Servo Controller is used and in excellent condition.

SC402-016-T4 Configuration:
• Power Level: 7A Peak, 3.5A (at 230VAC Input)/4.2(at 115 VAC Input) Continuous
• T4, Tachsyn Processor, 4.0V/Krpm tach gradient

SC402 Specifications:
• Input Voltage: 115/230 VAC, 1 or 3 phase, 47-63Hz
• Bus Voltage (230 VAC Input): 320 VDC
• Bus Voltage (115 VAC Input): 160 VDC
• Output Current (Peak): 7A
• Output Current (Continuous, Stall, 230 VAC): 3.5A
• Output Current (Continuous, Stall, 115 VAC): 4.2A
• Output Power (Peak, 230 VAC Input): 2000 W
• Output Power (Peak, 115 VAC Input): 1000 W
• Output Power (Continuous, Stall, 230 VAC Input, 3-Phase Input): 1000 W
• Output Power (Continuous, Stall, 230 VAC Input, 1-Phase Input): 700 W
• Output Power (Continuous, Stall, 230 VAC Input, 1-Phase Input): 350 W
• Form Factor: < />
• Current Loop Bandwidth: 3 kHz max.
• Velocity Offset: Adjustable to zero
• Velocity Input Command: ±10V





  • Description
  • Tech Specs
  • Datasheets / Manuals 
Contact Us
Share:

Description

The Danaher Motion / Pacific Scientific / IMEC 400 Series Brushless Servo Controllers are designed to operate Pacific Scientific Brushless Servo Motors or other 3-phase, Permanent Magnetic (PM) Brushless Servo motors. Each controller is an independent stand-alone unit capable of four quadrant control of a single PM Brushless Servo motor. The controller can be configured with a Brushless Servo motor as either a torque block or, if the motor is equipped with a Tachsyn, as a velocity block. The controller employs high-frequency PWM current control to achieve high quality servo performance. Multiple protection circuits and careful design insure trouble-free operation.

Product Family: SC403-030-T4, SC403 030 T4, SC403030T4, SC403030 T4
Contact Us
Share:

Specifications