Procon Series 1 Rotary Vane Pump
  • Procon_Series1_142844_View1
  • Procon_Series1_142844_View2

Procon Series 1 Rotary Vane Pump



This Procon Series 1 Rotary Vane Pump is new from surplus stock. Full part number unknown.

Configuration:
• Brass Housing
• Adjustable PSI Setting

Part Number: 10648, 10655, 10675




Have a quote from somewhere else? Click Here
Stock # 67331-4
Quick Quote
Sell Yours
Repair Quote
  • More Info
  • Tech Specs
  • Additional Photos
  • Datasheets / Manuals 
  • View It Live Request 
Contact Us
Share:
Procon Series 1 / Series 2 / Series 3 Rotary Vane Pump

Features
  • Ideally Suited for Many Clean Fluids
  • Self-Priming
  • Quiet and Low Vibration and Pulsation Characteristics
  • Flow Remains Constant Over the Entire Pressure Range

Description

The Procon Series 1 pumps have the protection of an integral inlet strainer. The standard strainer is a 100 mesh wire screen. It traps particles that can cause serious damage to the pump. The strainer is equipped with a removable cap to allow periodic cleaning, every 4 months under normal conditions (more frequently with hard or turbid water). The clamp-on mounting style is shown in the photo; bolt-on mounting is also available.

PROCON's Series 2 pumps have the same features as the Series 1 except they do not have the integral strainer. Series 1, 2 and 3 are available in 11 flow rates: 15, 25, 35, 50, 60, 70, 80, 100, 110, 125 and 140 gallons per hour at up to 250 psi. Clamp-on mounting style is shown in the photo; bolt-on mounting is also available.

PROCON's Series 3 pumps boast all the unique design features of other PROCON pumps. Because the pump body and all the internal metal parts are made from stainless steel, the Series 3 is well suited for pumping a variety of fluids not suitable with brass. Clamp-on mounting style is shown in the photo; bolt-on mounting is also available.


Product Family: Series 1, Series1, Series One, Brass Rotary Vane Pump, 101R100R12BC099, Series 2, Series 3, Series2, Series3, Series-2, Series-3


Important Notice: Please note that any additional items included with this equipment such as accessories, manuals, cables, calibration data, software, etc. are specifically listed in the above stock item description and/or displayed in the photos of the equipment. Please contact one of our Customer Support Specialists if you have any questions about what is included with this equipment or if you require any additional information.


Contact Us
Share:

Specifications

Body MaterialType 303 Brass
Capacity15-140 GPH
Nominal Speed1725 RPM
Max. Discharge Pressure250 psi
Typical Horsepower Required.25 to .50 HP
Maximum Discharge Pressure250 PSI
Rotation (Viewed from Nameplate End)Clockwise
Port Size3/8 NPT Inlet and Outlet
Self-Priming (Water)6 ft Maximum Lift


Contact Us
Share:

Item Images

Click a thumbnail to view larger image:

Procon Series 1 / Series 2 / Series 3 Rotary Vane Pump
101R100R12BC099
Procon Series 1 / Series 2 / Series 3 Rotary Vane Pump
101R100R12BC099
Procon Series 1 / Series 2 / Series 3 Rotary Vane Pump
101R100R12BC099
Procon Series 1 / Series 2 / Series 3 Rotary Vane Pump
101R100R12BC099


Contact Us
Share:

View It Live

View equipment LIVE - Before you buy!

InstraView™ Equipment Inspection



Buying used equipment doesn't always have to be a shot in the dark. We know there are plenty of differences when it comes to used equipment and quite often, choosing between different pieces is difficult, especially when the equipment is not sitting right in front of you.

Well, what if you were able to see a piece of equipment before you purchased it? Not just a picture from the manufacturer's website, but the actual piece of equipment you would receive.
With InstraView™, we move you one step closer to inspecting the equipment you're interested in without having to wait for the equipment to show up at your door.

InstraView™ works in your web browser and allows you to view the actual piece of equipment you're interested in before purchasing. You can zoom in close to see the labels with the serial number or zoom out to see the overall condition of the equipment.

It's like having the store come to you!


InstraView Request Form

To get started:

  1.   Fill in the request form below
  2.   We'll send you an email letting you know exactly when your piece of equipment will be available for viewing

Name:
Email:
Item to Inspect: 67331-4 - Procon Series 1 Rotary Vane Pump


All you need is a web browser (ie. Microsoft Internet Explorer or Netscape) and Sun's Java Runtime Environment installed. If you need to install the Sun Java Runtime, you may download the latest Java SE Runtime Environment (JRE) http://www.oracle.com/technetwork/java/javase/downloads/index.html