Newport / Klinger MD4 Stepping Motor Power Driver
  • Klinger_MD4_73247-6_View5
  • Klinger_MD4_73247-6_View6
  • Klinger_MD4_73247-6_View3
  • Klinger_MD4_73247-6_View4

Newport / Klinger MD4 Stepping Motor Power Driver



Configuration:
• Axes W, X, Y, and Z set up for use with motors: UE-71 Motors (Current: 1 Amps)




Have a quote from somewhere else? Click Here
Stock # 73247-6
Quick Quote
Sell Yours
Repair Quote
  • More Info
  • Tech Specs
  • Additional Photos
  • Datasheets / Manuals 
  • View It Live Request 
Contact Us
Share:
Newport / Klinger MC4 / MD4 Stepping Motor Controller Driver

Features
  • IEEE-4888 & RS-232-C Compatible
  • Manual Control Via Front Panel Switches and Remote Control Unit
  • Simultaneous, Sequential & Interdependent Command Execution
  • Status Reporting While Idle and While Executing Commands
  • Error Checking and Reporting Over the Communication Channel
  • Indication of Position Via LED Display
  • Programmable Step Pulse Rates
  • 3 External Inputs for Synchronization of Program Execution
  • 8 Kilobytes User Program Buffer

Description

The Newport / Klinger Scientific MC4 Programmable Stepping Motor Controller provides up to four axes of intelligent stepping motor pulse generation. When connected to a stepping motor driver and a host computer, it forms a compact, high performance unit capable of both basic independent movements and very elaborate repetitive cycles, similar to a robotic system. Different controls located on the front panel give the MC4 total autonomy.

Model MC4 is a 4-axis intelligent stepping motor pulse generator. It does not contain any internal power amplifiers to drive stepping motors. It is designed to be used with the MD4 Stepping Motor Power Driver.

Model MD4 Stepping Motor Power Driver is a modular unit capable of driving from one to four stepping motors. This can include any combination of variable reluctance and permanent magnet motors. Variable reluctance motors are driven in full step mode only. Permanent magnet motors are driven in ministep mode only. A ministep is a fraction of a full step. The MD$ will move a permanent magnet stepping motor one-tenth of a fullstep for every step pulse it receives from the MC4. For a normally specified 200 step/revolution stepping motor, it now becomes a 2000 step/revolution motor.


Product Family: MC-4, MC4, MD-4, MD4


Important Notice: Please note that any additional items included with this equipment such as accessories, manuals, cables, calibration data, software, etc. are specifically listed in the above stock item description and/or displayed in the photos of the equipment. Please contact one of our Customer Support Specialists if you have any questions about what is included with this equipment or if you require any additional information.


Contact Us
Share:

Specifications

Contact Us
Share:

Item Images

Click a thumbnail to view larger image:

Newport / Klinger MC4 / MD4 Stepping Motor Controller Driver
Front View
Newport / Klinger MC4 / MD4 Stepping Motor Controller Driver
Front Angled View
Newport / Klinger MC4 / MD4 Stepping Motor Controller Driver
Back View
Newport / Klinger MC4 / MD4 Stepping Motor Controller Driver
Back Angled View


Contact Us
Share:
Manuals, Datasheets, Drivers, Links

Newport / Klinger MC-4/MD-4 Manual (pdf) 
Link to Newport / Klinger Website 


Contact Us
Share:

View It Live

View equipment LIVE - Before you buy!

InstraView™ Equipment Inspection



Buying used equipment doesn't always have to be a shot in the dark. We know there are plenty of differences when it comes to used equipment and quite often, choosing between different pieces is difficult, especially when the equipment is not sitting right in front of you.

Well, what if you were able to see a piece of equipment before you purchased it? Not just a picture from the manufacturer's website, but the actual piece of equipment you would receive.
With InstraView™, we move you one step closer to inspecting the equipment you're interested in without having to wait for the equipment to show up at your door.

InstraView™ works in your web browser and allows you to view the actual piece of equipment you're interested in before purchasing. You can zoom in close to see the labels with the serial number or zoom out to see the overall condition of the equipment.

It's like having the store come to you!


InstraView Request Form

To get started:

  1.   Fill in the request form below
  2.   We'll send you an email letting you know exactly when your piece of equipment will be available for viewing

Name:
Email:
Item to Inspect: 73247-6 - Newport / Klinger MD4 Stepping Motor Power Driver


All you need is a web browser (ie. Microsoft Internet Explorer or Netscape) and Sun's Java Runtime Environment installed. If you need to install the Sun Java Runtime, you may download the latest Java SE Runtime Environment (JRE) http://www.oracle.com/technetwork/java/javase/downloads/index.html