Danaher Motion / Giddings and Lewis PiC900 Analog Output ±10V DC Module
  • Giddings_and_Lewis_PiC900_View1_201518152742
  • Giddings_and_Lewis_PiC900_View2_201518152742
  • Giddings_and_Lewis_PiC900_View3_201518152742
  • Giddings_and_Lewis_PiC900_View4_201518152742

Danaher Motion / Giddings and Lewis PiC900 Analog Output ±10V DC Module



This Danaher Motion / Giddings and Lewis PiC900 Analog Output ±10V DC Module is used and in good condition. The front plate is missing but this does not affect functionality.

The ±10V DC output module has eight or four independent D/A conversion channels. It is also called a D/A or Analog Output module. Each channel converts a 16-bit digital word into a differential type analog output signal. The full range of the output signal is -11 V to +11 V, with a resolution of 1 part in 65,536.

Configuration:
• Number of Output Channels: 8
• Resolution: 16 Bits or 65536 Steps Over Full Output Range

View Photo of missing front plate.

Part Number: 502-03518-02R1




Have a quote from somewhere else? Click Here
Stock # 80729-2
Quick Quote
Sell Yours
Repair Quote
  • More Info
  • Tech Specs
  • Additional Photos
  • Datasheets / Manuals 
  • View It Live Request 
Contact Us
Share:
Danaher Motion / Giddings and Lewis PiC Programmable Industrial Computer System

Features
  • Interchangeable Modules
  • Power Regulation
  • Adjustable System Racks

Description

The Danaher Motion / Giddings and Lewis PiC Programmable Industrial Computer System is more than just a motion control; it’s a machine control. The PiC combines motion, logic, and process control all in a single programming environment. Programmed with IEC1131 ladder logic and function block language using our powerful PiCPro for Windows software, the PiC provides a close coupled, integrated solution to the logic, motion, process, operator interface, and communications requirements found in today’s industrial automation applications.

Motion control is accomplished through the use of encoder/resolver feedback modules and analog output modules, or by using the SERCOS module. The machine inputs and outputs (logic and process control) are handled with a wide variety of rack I/O or distributed block I/O modules. All I/O modules can be used across the PiC90 and PiC900 product lines interchangeably. Serial communications modules and application-specific software functions allow the PiC to communicate to a wide variety of operator interface devices.

PiCPro is the machine control software that ties it all together. Application programs developed for any PiC solution are 100% software compatible with one another. Motion, logic, operator interface, and process control are all performed in a single programming environment, simplifying development, maintenance, and troubleshooting of the application program.


Product Family: PiC, PiC90, PiC900


Important Notice: Please note that any additional items included with this equipment such as accessories, manuals, cables, calibration data, software, etc. are specifically listed in the above stock item description and/or displayed in the photos of the equipment. Please contact one of our Customer Support Specialists if you have any questions about what is included with this equipment or if you require any additional information.


Contact Us
Share:

Specifications

Contact Us
Share:

Item Images

Click a thumbnail to view larger image:

Danaher Motion / Giddings and Lewis PiC Programmable Industrial Computer SystemDanaher Motion / Giddings and Lewis PiC Programmable Industrial Computer SystemDanaher Motion / Giddings and Lewis PiC Programmable Industrial Computer System
Danaher Motion / Giddings and Lewis PiC Programmable Industrial Computer System


Contact Us
Share:

View It Live

View equipment LIVE - Before you buy!

InstraView™ Equipment Inspection



Buying used equipment doesn't always have to be a shot in the dark. We know there are plenty of differences when it comes to used equipment and quite often, choosing between different pieces is difficult, especially when the equipment is not sitting right in front of you.

Well, what if you were able to see a piece of equipment before you purchased it? Not just a picture from the manufacturer's website, but the actual piece of equipment you would receive.
With InstraView™, we move you one step closer to inspecting the equipment you're interested in without having to wait for the equipment to show up at your door.

InstraView™ works in your web browser and allows you to view the actual piece of equipment you're interested in before purchasing. You can zoom in close to see the labels with the serial number or zoom out to see the overall condition of the equipment.

It's like having the store come to you!


InstraView Request Form

To get started:

  1.   Fill in the request form below
  2.   We'll send you an email letting you know exactly when your piece of equipment will be available for viewing

Name:
Email:
Item to Inspect: 80729-2 - Danaher Motion / Giddings and Lewis PiC900 Analog Output ±10V DC Module


All you need is a web browser (ie. Microsoft Internet Explorer or Netscape) and Sun's Java Runtime Environment installed. If you need to install the Sun Java Runtime, you may download the latest Java SE Runtime Environment (JRE) http://www.oracle.com/technetwork/java/javase/downloads/index.html