GE Fanuc / Whedco CMC-31CX-2-B-LPA Coordinated Motion Controller
  • GE_Fanuc_Whedco_CMC_31CX_2_B_LPA_View1_201624134527
  • GE_Fanuc_Whedco_CMC_31CX_2_B_LPA_View2_201624134527
  • GE_Fanuc_Whedco_CMC_31CX_2_B_LPA_View3_201624134527
  • GE_Fanuc_Whedco_CMC_31CX_2_B_LPA_View4_201624134527

GE Fanuc / Whedco CMC-31CX-2-B-LPA Coordinated Motion Controller



This GE Fanuc / Whedco CMC-31CX-2-B-LPA Coordinated Motion Controller is used and in excellent condition.

Part Number: 78005337D / 9406




Have a quote from somewhere else? Click Here
Stock # 87203-3
Quick Quote
Sell Yours
Repair Quote
  • More Info
  • Tech Specs
  • Additional Photos
  • Datasheets / Manuals 
  • View It Live Request 
Contact Us
Share:
GE Fanuc / Whedco CMC Series Coordinated Motion Controllers

Features
  • (4) Axis Controller with Linear and Circular Interpolation Capabilities
  • Coordinates Both Stepping and Servo Motor in Any Combination
  • Circular Interpolation Between X and Y Axes and Between W and Z Axes
  • Linear Interpolation Between any Combination of the Four Axes
  • Programming Interface for Entire System

Description

The GE Fanuc / Whedco CMC Series Coordinated Motion Controllers provide for coordinated control of up to four axes of stepping and / or servo motors. The CMC-0 acts as the coordinating (master) unit and the programming interface. CMC-1 Stepping Motor Controllers and the CMC-2 Servo Motor Controllers perform the actual motor control functions.

Programming is accomplished through the CMC-0 unit via an ASCII command set. Once programmed, individual profiles can be executed via any serial device or by parallel inputs which reside on the individual axis controllers. Up to eight CMC-0 units can be daisy-chained off of one serial lines for easy programming and control of large systems.

The CMC-0 incorporates many features to make profile definition and system operation as flexible as possible. Analog and encoder inputs can both be used for jog functions and other moves. The encoder inputs can be configured to accept either quadrature or pulse and direction signals. In addition, profiles can incorporate moves based on dwell times, motor position(s), and logical combinations of external inputs and internal Boolean variables. Profiles can also initiate the execution of other profiles through the use of GOTO and GOSUB statements.


Product Family: CMC-0101-2-B, CMC-O1O1-2-B


Important Notice: Please note that any additional items included with this equipment such as accessories, manuals, cables, calibration data, software, etc. are specifically listed in the above stock item description and/or displayed in the photos of the equipment. Please contact one of our Customer Support Specialists if you have any questions about what is included with this equipment or if you require any additional information.


Contact Us
Share:

Specifications

Contact Us
Share:

Item Images

Click a thumbnail to view larger image:

GE Fanuc / Whedco CMC Series Coordinated Motion ControllersGE Fanuc / Whedco CMC Series Coordinated Motion ControllersGE Fanuc / Whedco CMC Series Coordinated Motion Controllers
GE Fanuc / Whedco CMC Series Coordinated Motion Controllers


Contact Us
Share:

View It Live

View equipment LIVE - Before you buy!

InstraView™ Equipment Inspection



Buying used equipment doesn't always have to be a shot in the dark. We know there are plenty of differences when it comes to used equipment and quite often, choosing between different pieces is difficult, especially when the equipment is not sitting right in front of you.

Well, what if you were able to see a piece of equipment before you purchased it? Not just a picture from the manufacturer's website, but the actual piece of equipment you would receive.
With InstraView™, we move you one step closer to inspecting the equipment you're interested in without having to wait for the equipment to show up at your door.

InstraView™ works in your web browser and allows you to view the actual piece of equipment you're interested in before purchasing. You can zoom in close to see the labels with the serial number or zoom out to see the overall condition of the equipment.

It's like having the store come to you!


InstraView Request Form

To get started:

  1.   Fill in the request form below
  2.   We'll send you an email letting you know exactly when your piece of equipment will be available for viewing

Name:
Email:
Item to Inspect: 87203-3 - GE Fanuc / Whedco CMC-31CX-2-B-LPA Coordinated Motion Controller


All you need is a web browser (ie. Microsoft Internet Explorer or Netscape) and Sun's Java Runtime Environment installed. If you need to install the Sun Java Runtime, you may download the latest Java SE Runtime Environment (JRE) http://www.oracle.com/technetwork/java/javase/downloads/index.html