Thermo / Forma Scientific 3033 Steri-Cult CO2 Incubator

Thermo / Forma Scientific 3033 Steri-Cult CO2 Incubator



Access panel fiber-glass cover missing. This unit's Humidity Control function is not operable. This does not affect Temperature or CO2 control. This unit has been priced accordingly.

Features:
• 1 Adjustable, Perforated, Stainless Steel Shelf
• CO2 Inlet

Input Voltage: 120V only




Have a quote from somewhere else? Click Here
Stock # 52910-10
Quick Quote
Sell Yours
Repair Quote
  • More Info
  • Tech Specs
  • Additional Photos
  • Datasheets / Manuals 
  • View It Live Request 
Contact Us
Share:
Thermo / Forma Scientific 3033 Steri-Cult CO2 Incubator

Features
  • HEPA Filtered Air
  • Temperature Range: +4C above ambient to +45C
  • Relative Humidity Sensor
  • Infrared CO2 Sensor

Description

Reliable, accurate, and simple to operate, Thermo Forma Steri-Cult CO2 Incubators use proven HEPA filtered, vertical laminar airflow techniques and a filtered external water supply to minimize contamination and desiccation of cultures. Stackable Steri-Cult CO2 Incubators are available in two sizes. Model 3860 (3862) offers 7.4 cu. ft. (209.5 liters) of culturing space. Model 3033 (3035) offers 10.5 cu. ft. (297.3 liters) of usable space. Fully tested and time-proven infrared (IR) CO2 technology provides precise control over the 0-20% range. Auto-zero function automatically calibrates CO2, ensuring accuracy. Reliable IR sensor maintains a consistent CO2 level independent of temperature and humidity. Two inches (5.1cm) of polyurethane insulation provide an R value of 16, and surround the air jacket to reduce heat loss and insulate the chamber from ambient conditions. Innovative humidity supply system, located outside the chamber, provides rapid RH recovery. The humidity system is not a vapor generator and has no immersible heater to burn out or to cause scaling.


Important Notice: Please note that any additional items included with this equipment such as accessories, manuals, cables, calibration data, software, etc. are specifically listed in the above stock item description and/or displayed in the photos of the equipment. Please contact one of our Customer Support Specialists if you have any questions about what is included with this equipment or if you require any additional information.


Contact Us
Share:

Specifications

Exterior Dimensions40.3"W x 39.5"H x 26.8"F-B (102.4cm x 100.3cm x 68.1cm)
Interior Dimensions27.2"W x 33.0"H x 20.3"F-B (69.1cm x 83.8cm x 51.6cm)
Electrical115V, 60 Hz, 7.0 FLA
RH (%), CO2 (%), Temp (C) Readability & Setability0.1% or 0.1C
Temperature
Temperature Control±0.1C
Temperature Range4C above ambient to 45C (113F)
Temperature SensorPlatinum
Temperature Uniformity±0.3C @ 37C (98.6F)
CO2
CO2 ControlBetter than ±0.1%
CO2 Range0-20%
CO2 SensorInfrared
Humidity
RHAmbient to > 95% RH @37C (98.6F)
Humidity Control±2.0%
Humidity SensorPlatinum
Reservoir1.0 gal. (3.8 liters)


Contact Us
Share:

Item Images

Click a thumbnail to view larger image:

Thermo / Forma Scientific 3033 Steri-Cult CO2 IncubatorThermo / Forma Scientific 3033 Steri-Cult CO2 IncubatorThermo / Forma Scientific 3033 Steri-Cult CO2 Incubator


Contact Us
Share:

View It Live

View equipment LIVE - Before you buy!

InstraView™ Equipment Inspection



Buying used equipment doesn't always have to be a shot in the dark. We know there are plenty of differences when it comes to used equipment and quite often, choosing between different pieces is difficult, especially when the equipment is not sitting right in front of you.

Well, what if you were able to see a piece of equipment before you purchased it? Not just a picture from the manufacturer's website, but the actual piece of equipment you would receive.
With InstraView™, we move you one step closer to inspecting the equipment you're interested in without having to wait for the equipment to show up at your door.

InstraView™ works in your web browser and allows you to view the actual piece of equipment you're interested in before purchasing. You can zoom in close to see the labels with the serial number or zoom out to see the overall condition of the equipment.

It's like having the store come to you!


InstraView Request Form

To get started:

  1.   Fill in the request form below
  2.   We'll send you an email letting you know exactly when your piece of equipment will be available for viewing

Name:
Email:
Item to Inspect: 52910-10 - Thermo / Forma Scientific 3033 Steri-Cult CO2 Incubator


All you need is a web browser (ie. Microsoft Internet Explorer or Netscape) and Sun's Java Runtime Environment installed. If you need to install the Sun Java Runtime, you may download the latest Java SE Runtime Environment (JRE) http://www.oracle.com/technetwork/java/javase/downloads/index.html