Gems Sensors RF-2500 Continuous Output RotorFlow Sensor
  • Gems_Sensors_RF_2500_View1
  • Gems_Sensors_RF_2500_View2
  • Gems_Sensors_RF_2500_View3
  • Gems_Sensors_RF_2500_View4

Gems Sensors RF-2500 Continuous Output RotorFlow Sensor



This Gems Sensors RF-2500 Continuous Output RotorFlow Sensor is new from surplus stock.

Part Number: 170305

RF-2500 Configuration:
• Input Power: 4.5 to 14 VDC/12 mA
• Output Signal: Frequency Pulses (Proportional to Flowrate)
• Current Source Output, Max: 70 mA
• Frequency Output Range: 15 to 225 Hz
• Body Material: Polypropylene
• 0.5" Port Size, NPT




Have a quote from somewhere else? Click Here
Stock # 67799-3
Quick Quote
Sell Yours
Repair Quote
  • More Info
  • Tech Specs
  • Additional Photos
  • Datasheets / Manuals 
  • View It Live Request 
Contact Us
Share:
Gems Sensors RFO / RFA-2500 Series Continuous Output RotorFlow Sensors

Features
  • High Visibility Rotors
  • Solid-State Electronics
  • Compact, Panel Mounting Housings
  • VDC Pulsed Output

Description

The Gems RFO / RFA-2500 Series Continuous Output RotorFlow Sensors RotorFlow units monitor dynamic fluid flow. The rotor reacts to turbulence, pulsation, entrained air, and other flow anomalies induced in the flow stream by other process hardware. For optimum performance, install RotorFlow units where nominal flow conditions exist, with ports located at the top. Incoming flow may be placed to either port. A minimum of 8" of straight pipe on the inlet side is recommended. Note: Frequency output (RFO) and voltage output (RFA) are determined by the velocity of the monitored fluid acting on the sensor rotor. Input piping with an orifice smaller than that of the sensor input will affect sensor output.


Product Family: 155421, 155481, 156261, 156262, 194761, 194762, 165071, 165075, 194763, 194764, RFA-2500, RFA2500, RFA 2500


Important Notice: Please note that any additional items included with this equipment such as accessories, manuals, cables, calibration data, software, etc. are specifically listed in the above stock item description and/or displayed in the photos of the equipment. Please contact one of our Customer Support Specialists if you have any questions about what is included with this equipment or if you require any additional information.


Contact Us
Share:

Specifications

Wetted Material
BodyStainless Steel, Brass or Polypropylene, (Hydrolytically Stable, Glass-Reinforced)
Rotor PinCeramic
RotorPPS/Teflon Composite; Black
LensPolysulfone
O-RingBuna N or Viton
Operating Pressure, Max.
Brass/Stainless Steel Body200 PSIG at 70°F/80 PSIG at 212°F
Polypropylene Body100 PSIG at 70°F/40 PSIG at 212°F
Operating Temperature, Max.
Brass Body212°F (100°C)
Stainless Steel Body180°F (82.2°C)
Polypropylene Body150°F (65.5°C) - Ambient
Viscosity Max200 SSU


Contact Us
Share:

Item Images

Click a thumbnail to view larger image:

Gems Sensors RFO / RFA-2500 Series Continuous Output RotorFlow Sensors
RF-2500
Gems Sensors RFO / RFA-2500 Series Continuous Output RotorFlow Sensors
RF-2500
Gems Sensors RFO / RFA-2500 Series Continuous Output RotorFlow Sensors
RF-2500
Gems Sensors RFO / RFA-2500 Series Continuous Output RotorFlow Sensors
RF-2500


Contact Us
Share:
Manuals, Datasheets, Drivers, Links

Gems RFO Datasheet (pdf) 
Gems RFO / RFA-2500 Datasheet (pdf) 
Link to Gems Sensors Website 


Contact Us
Share:

View It Live

View equipment LIVE - Before you buy!

InstraView™ Equipment Inspection



Buying used equipment doesn't always have to be a shot in the dark. We know there are plenty of differences when it comes to used equipment and quite often, choosing between different pieces is difficult, especially when the equipment is not sitting right in front of you.

Well, what if you were able to see a piece of equipment before you purchased it? Not just a picture from the manufacturer's website, but the actual piece of equipment you would receive.
With InstraView™, we move you one step closer to inspecting the equipment you're interested in without having to wait for the equipment to show up at your door.

InstraView™ works in your web browser and allows you to view the actual piece of equipment you're interested in before purchasing. You can zoom in close to see the labels with the serial number or zoom out to see the overall condition of the equipment.

It's like having the store come to you!


InstraView Request Form

To get started:

  1.   Fill in the request form below
  2.   We'll send you an email letting you know exactly when your piece of equipment will be available for viewing

Name:
Email:
Item to Inspect: 67799-3 - Gems Sensors RF-2500 Continuous Output RotorFlow Sensor


All you need is a web browser (ie. Microsoft Internet Explorer or Netscape) and Sun's Java Runtime Environment installed. If you need to install the Sun Java Runtime, you may download the latest Java SE Runtime Environment (JRE) http://www.oracle.com/technetwork/java/javase/downloads/index.html