Newport / Oriel 71445 Electronic Safety Shutter
- Terminates Beam Without Shutting Down the System
- Usable with Sources to 1000 W
- Convenient Remote Control Switch
The Newport / Oriel 71445 Electronic Safety Shutter consists of a 1.5 Inch Series flanged enclosure that houses the blade, and a stand-alone shutter drive for 115 and 220 V operation. The enclosure has a female-flange on one end and a male-flange on the other. The male end couples directly to the light source condenser and the female end accepts any male flanged accessory. The clear aperture for a through beam is 1.3 inches (33 mm) for 1.5 Inch Series condensers. You can also rod mount the shutter in the light path. A 1/4-20 tapped hole in the bottom accepts the optical rods. The shutter drive has an open/close switch and a TTL or contact closure input so you can control the shutter via a PC. The rise/fall time of the blade is ~0.1 second, but there is a delay before the blade starts to close the aperture. The front of the supply has an LED to indicate whether the shutter is open or closed.
Product Family: 71445
Important Notice: Please note that any additional items included with this equipment such as accessories, manuals, cables, calibration data, software, etc. are specifically listed in the above stock item description and/or displayed in the photos of the equipment. Please contact one of our Customer Support Specialists if you have any questions about what is included with this equipment or if you require any additional information.