OMEGA FV102 Vortex Shedding Flow Meter
  • OMEGA_FV102_View1_20161111111456
  • OMEGA_FV102_View2_20161111111456
  • OMEGA_FV102_View3_20161111111456
  • OMEGA_FV102_View4_20161111111456
  • OMEGA_FV102_View5_20161111111456

OMEGA FV102 Vortex Shedding Flow Meter



Configuration:
• Connection: ½ FNPT
• Min. Flow Range (GPM): 1.2
• Max. Flow Range (GPM): 12
• Pressure Drop psid Max.: 3.6
• Weight: 1.2 kg, 2.6 lbs





Stock # 90347-2
In Stock: Yes
Price: Contact Us
  • More Info
  • Tech Specs
  • Additional Photos
  • Datasheets / Manuals 
  • View It Live Request 
Contact Us
Share:
OMEGA FV100 / FV100-T Vortex Shedding Flow Meters

Features
  • SSR Alarm
  • 4 to 20 mA Output
  • LED Display

Description

FV100

The Omega FV100 Vortex Shedding Flow Meters is an inline flow meter that utilizes the vortex shedding principle. The fluid strikes a bluff body generating vortices (eddies) that move downstream. The vortices form alternately, from one side to the other. A piezoelectric sensor housed in a sensor tube directly downstream of the bluff senses the pressure zones created by the vortices. The sensor generates a frequency directly proportional to the vortices (flow). The pulses are then amplified by the circuit board and converted to a 4-20 mA output, which is also linear with flow. Flow can be displayed on the LED display in either GPM or LPM. Selection of the preferred units of measure is made from two white front panel push buttons. There is also a solid state relay output that can be set for a low flow contact from 15% to 90% of full-scale flow. The relay can be configured to be NC (normally closed) or NO (normally open) at flow (above set point). It will change state on decreasing flow upon reaching the setpoint.

FV100-T

The Omega FV100-T Vortex Shedding Flow Meters combine temperature measurement with the flow measuring features of FV100 Series. The housing utilizes a temperature sensor housed in a small thermowell directly downstream of the flow sensor. FV100-T meters display temperature or flow on the LED display. Temperature can be displayed in either degrees Fahrenheit or Celsius and is selectable from the two white front panel buttons. There is a 4-20 mA output proportional to temperature and a solid state relay that can be configured for a high temperature set point. The relay function will be the same as selected for flow, normally closed or normally open, below set point, since it is a high alarm. So, you have two transmitters in one - flow and temperature.


Product Family: FV100, FV100-T, FV101, FV102, FV103, FV104, FV105, FV106, FV107, FV108


Important Notice: Please note that any additional items included with this equipment such as accessories, manuals, cables, calibration data, software, etc. are specifically listed in the above stock item description and/or displayed in the photos of the equipment. Please contact one of our Customer Support Specialists if you have any questions about what is included with this equipment or if you require any additional information.


Contact Us
Share:

Specifications

Contact Us
Share:

Item Images

Click a thumbnail to view larger image:

OMEGA FV100 / FV100-T Vortex Shedding Flow MetersOMEGA FV100 / FV100-T Vortex Shedding Flow MetersOMEGA FV100 / FV100-T Vortex Shedding Flow Meters
OMEGA FV100 / FV100-T Vortex Shedding Flow MetersOMEGA FV100 / FV100-T Vortex Shedding Flow Meters


Contact Us
Share:
Manuals, Datasheets, Drivers, Links

OMEGA FV100 / FV100-T Datasheet (pdf) 
OMEGA FV100 / FV100-T Manual (pdf) 
Link to OMEGA Website 


Contact Us
Share:

View It Live

View equipment LIVE - Before you buy!

InstraView™ Equipment Inspection



Buying used equipment doesn't always have to be a shot in the dark. We know there are plenty of differences when it comes to used equipment and quite often, choosing between different pieces is difficult, especially when the equipment is not sitting right in front of you.

Well, what if you were able to see a piece of equipment before you purchased it? Not just a picture from the manufacturer's website, but the actual piece of equipment you would receive.
With InstraView™, we move you one step closer to inspecting the equipment you're interested in without having to wait for the equipment to show up at your door.

InstraView™ works in your web browser and allows you to view the actual piece of equipment you're interested in before purchasing. You can zoom in close to see the labels with the serial number or zoom out to see the overall condition of the equipment.

It's like having the store come to you!


InstraView Request Form

To get started:

  1.   Fill in the request form below
  2.   We'll send you an email letting you know exactly when your piece of equipment will be available for viewing

Name:
Email:
Item to Inspect: 90347-2 - OMEGA FV102 Vortex Shedding Flow Meter


All you need is a web browser (ie. Microsoft Internet Explorer or Netscape) and Sun's Java Runtime Environment installed. If you need to install the Sun Java Runtime, you may download the latest Java SE Runtime Environment (JRE) http://www.oracle.com/technetwork/java/javase/downloads/index.html