15 / 31962 Results
Sort By
Items/Page
VIAVI Solutions / JDSU HA9593-FAS2 Programmable Optical Attenuator
This is the Highly Configurable Model.

Part Number: HA9593-FAS2
• Fiber Type: 9/125 um
• Range: 1200-1700 nm
• Attenuation Range: 100 dB
(...)
• Split Output: 10/90 Coupler
• Optical Interface: FC/APC
• Standard Return Loss: > 45 dB
• Bulkheads on Front Panel
• Max Input Power: 200 mW


Power General FLU3-40-6 Triple Output Power Supply
Configuration:
• Input Voltage: 85-265 VAC
• Output Power: 40 W
• Number of Outputs: 3
• Output Voltage: 5 VDC, 12 VDC

Part Number: 901538
BP Microsystems SM52QW Manual Socket Module
Socket Module FPQ-52-1.0-04 Configuration:
• Socket Series: FPQ
• Pin Count: 52
• Pitch: 1.0
(...)
• Design Number: 4
Baker Motion Control 513005 ISA Interface Board
This Baker Motion Control 513005 ISA Interface Board is used and in excellent condition.

Acromag AVME 9668 VMEbus 6U IP Carrier Card
This Acromag AVME 9668 VMEbus 6U IP Carrier Card is used and in excellent condition.

Configuration:
• 6U Carrier, Holds Four IP Modules
(...)
• IP Compliance (ANSI/VITA 4)
• VMEbus Compliance
• Operating temperature: 0 to 70°C

Part Number: 1018-830A

Rittal SZ2561.500 Plastic Cable Gland Plate With Membranes (Size 3)
Configuration:
• Volume: 1.06 dm3
• Net Weight: .33 kg
• Cable Diameters Supported: 19-34mm, 15-21mm, 4X16-25mm, 17X6-11mm, 27X10-15mm
Maxsys Technologies MPL857-A Register Based VXI Module
Configuration:
• (4) EPF6016QC240-3 Field Programmable Gate Arrays
• (2) PALC22V10 Programmable Logic Devices
(...)
• (6) G6K-2F Surface Mounted Relays
• (1) 9-Position DIP Switch
• (1) MXO45HS 16 MHz Clock Oscillator

Mitsubishi FX15 VME Module
This Mitsubishi FX15 VME Module is used and in excellent condition. Battery is used.

Configuration:
(...)
• Daughtercard: FX25A, Part Number: 624AI89HOI


Pilz 3901B1 Circuit Board Module
This Pilz 3901B1 is the Operation Panel: Model PiPANEL ISA-M Circuit Board Module.
National Instruments PCMCIA-DNET PSH15-C6 Cable
Part Number: 186855C-01

Product Family: NI-DNET, PCMCIA-DNET, Device Net, DeviceNet

NI forums has the following information regarding the PSH15-C6:(...)

Q: "Must I connect V+ in my low speed port (CAN/DS) if i use a PCMCIA CAN/2?"

A: "You must have the Two port low speed cable adapter, part number: 186855C-01. In this cable the transceiver is internally powered, so there is no need to power the transceiver from the bus."

National Instruments S8 Non-Isolated Serial Cable, 10Pos Modular Plug to DB-9 (2 Meters)
This National Instruments S8 Non-Isolated Serial Cable, 10Pos Modular Plug to DB-9 (2 Meter) is used and in excellent condition. This cable can be Grey or Blue.

Length: 2 Meters
(...)

Part Number: 182845A-02, 182845B-02, 182845C-02

Keysight / Agilent E4504A Dual Optical 1x4 Multiplexer
Configuration:
• Optical Interface Connectors: FC/PC
Ajax Loader

Loading Next...

Contact Us
Fax:

(240) 376-1381