10 / 31991 Results
Sort By
Items/Page
Instek GRA-403 Rack Mounting (19-Inch, 4u)
This Instek GRA-403 Rack Mounting (19-Inch, 4u) is Brand New and has full manufacturer's warranty.
National Instruments MXI Type M2 180760-08 Bus Cable (8 Meters)
Cable Type: 181037-01 CL2

The cable ends are straight to right-angle daisy chain.
Instek GPR-11H30D Single High Power Output Power Supply
This Instek GPR-11H30D - Single High Power Output Power Supply is Brand New and has full manufacturer's warranty.

Features:
• Output Volts: 0 - 110V
(...)
• Output Amps: 0 - 3A
• CE Approved

Keysight / Agilent E1432-61600 / E3240A 8-Channel Voltage Breakout Box with IEPE Power Supply
HP E1432-61600 Voltage-type Break Out Box(...)
Each of the eight connectors in this type of Break Out Box is connected to an independent, floating current source. These are intended to power integrated-circuit piezo-electric (ICP) transducers. They supply 4.5 mA (nominal) at up to 28 volts. The current sources are controllable by software in groups of four. That is, the current sources for connectors 1-4 can be turned on or off as a group, as can the current sources for connectors 5-8.

Break Out Box Grounding
Each connector on the HP E1432-61600 and HP E1432-61602 Break Out Box has a small manual switch next to it. When this switch is in the "GND" position the outer shell of the connector is grounded to the chassis ground of the VXI mainframe. When it is in the "DIFF" position it is not grounded to the mainframe and will float if not grounded elsewhere in the system (such as at the sensor). The connector shell should not be allowed to float: if the switch is in the "DIFF" position the shell should be grounded elsewhere in the system.


Schneeberger RNG Linear Guideway
Configuration:
• Bearing: Roller
• Speed:
     • 1 m/s
     • 1 m/s With Cage Control
(...)
• Acceleration:
     • 50 m/s 2
     • 300 m/s 2 With Cage Control
• Operating Temperatures: -40°C to +80°C
• Length: 150 mm

Part Numbers: RNG 6 150 SQ D SP, RNG 6 150 SQ SP

Keysight / Agilent E1452A-66503-T Replacement Board
This unit is the main PCB board for the E1452A. It is good for replacing E1452A cards that have gone bad (so the metal cover &front plate from the broken unit can be used on this new OEM unit).(...) These boards are surplus/new.


Abaco Systems / SBS 800-080064-00 ISA Serial I/O Module
This GE Fanuc / SBS 800-080064-00 ISA Serial I/O Module is used and in excellent condition.
Curtiss-Wright / Synergy Microsystems VGM5 VME Module
This Curtiss-Wright / Synergy Microsystems VGM5 VME Module is used and in excellent condition.

Configuration:
• 128 MB DRAM
(...)
• IBM PowerPC750L 415 MHz Processor

Board Revision Number: VGM5-F

Ajax Loader

Loading Next...

Contact Us
Fax:

(240) 376-1381