Yenista / NetTest / Photonetics BT-17 High Power C-Band Fiber Amplifier

Yenista / NetTest / Photonetics BT-17 High Power C-Band Fiber Amplifier



This Yenista / Anritsu BT-17 is used and in excellent condition. Unit is in the standard configuration with no installed options. Ships with a key and power cord.

Model Number: 3624-BF-17
Wide Benchtop Chassis
Optical Connectors on Rear Panel
Optical Interface: FC/APC
Fiber Type: Singlemode

an Artisan Technology Group technician Measured with a 1550 nm DFB Source:


With Pin = -40 dBm, Output power was Pout = +13.8 dBm
With Pin = -3 dBm, Output power was Pout = +17.1 dBm
With Pin = 0 dBm, Output power was Pout = +17.5 dBm
Saturated Output Power = +17.7 dBm

View Output Spectrum with Pin = -40 dBm
View Output Spectrum with Pin = -3 dBm
View Output Spectrum with Pin = 0 dBm




Have a quote from somewhere else? Click Here
Stock # 49918-2
Quick Quote
Sell Yours
Repair Quote
  • More Info
  • Tech Specs
  • Additional Photos
  • Datasheets / Manuals 
  • View It Live Request 
Contact Us
Share:
Yenista / NetTest / Photonetics BT-17 Fiberamp Series High Power C-Band Fiber Amplifier

Features
  • High Output Power: 17dBm
  • Wavelength Range: 1525 - 1560 nm
  • Benchtop or Rackmount Chassis
  • IEEE488 Interface
  • Small Signal Gain: >25dB (30 dB typ.)

Description

The Yenista / Anritsu FIBERAMP-BT 17 is a high-performance Erbium-Doped Fiber Amplifier that operates in the 1.55um spectral window. It features a single-pump configuration that delivers an outstanding high output power of +17 dBm of saturated output. Its co-propagating configuration (using a 980 nm pump diode) provides a low 4.5dB (typ.) noise figure and is ideally suited as a source booster.

FIBERAMP-BT 17 can operate either in "Constant Power Mode" or "Constant Current Mode". Either pump power or current is user programmable via the IEEE488 interface or by using the front panel dials.


Important Notice: Please note that any additional items included with this equipment such as accessories, manuals, cables, calibration data, software, etc. are specifically listed in the above stock item description and/or displayed in the photos of the equipment. Please contact one of our Customer Support Specialists if you have any questions about what is included with this equipment or if you require any additional information.


Contact Us
Share:

Specifications

Contact Us
Share:

Item Images

Click a thumbnail to view larger image:

Yenista / NetTest / Photonetics BT-17 Fiberamp Series High Power C-Band Fiber AmplifierYenista / NetTest / Photonetics BT-17 Fiberamp Series High Power C-Band Fiber AmplifierYenista / NetTest / Photonetics BT-17 Fiberamp Series High Power C-Band Fiber Amplifier
Yenista / NetTest / Photonetics BT-17 Fiberamp Series High Power C-Band Fiber Amplifier


Contact Us
Share:

View It Live

View equipment LIVE - Before you buy!

InstraView™ Equipment Inspection



Buying used equipment doesn't always have to be a shot in the dark. We know there are plenty of differences when it comes to used equipment and quite often, choosing between different pieces is difficult, especially when the equipment is not sitting right in front of you.

Well, what if you were able to see a piece of equipment before you purchased it? Not just a picture from the manufacturer's website, but the actual piece of equipment you would receive.
With InstraView™, we move you one step closer to inspecting the equipment you're interested in without having to wait for the equipment to show up at your door.

InstraView™ works in your web browser and allows you to view the actual piece of equipment you're interested in before purchasing. You can zoom in close to see the labels with the serial number or zoom out to see the overall condition of the equipment.

It's like having the store come to you!


InstraView Request Form

To get started:

  1.   Fill in the request form below
  2.   We'll send you an email letting you know exactly when your piece of equipment will be available for viewing

Name:
Email:
Item to Inspect: 49918-2 - Yenista / NetTest / Photonetics BT-17 High Power C-Band Fiber Amplifier


All you need is a web browser (ie. Microsoft Internet Explorer or Netscape) and Sun's Java Runtime Environment installed. If you need to install the Sun Java Runtime, you may download the latest Java SE Runtime Environment (JRE) http://www.oracle.com/technetwork/java/javase/downloads/index.html