Keysight / Agilent E1429A 20 MSa/s Digitizer

Keysight / Agilent E1429A 20 MSa/s Digitizer

This Agilent E1429A 20 MSa/s Digitizer is used, and in excellent condition.

Have a quote from somewhere else? Click Here
CE labeled RoHS Compliant
We typically stock RoHS compliant / CE marked equipment for this Keysight / Agilent E1429A.
Contact us for more information.
Stock # 52401-1
Quick Quote
Sell Yours
Repair Quote
  • More Info
  • Tech Specs
  • Additional Photos
  • Datasheets / Manuals 
  • View It Live Request 
Contact Us
Keysight / Agilent E1429A / E1429B 20 MSa/s Digitizer

  • Single-Slot, C-Size, VXI Module
  • 0.05 Sa/s to 20 MSa/s Sample Rate
  • Dual Channel, 12-bit Resolution
  • Analysis Capability with the E1485A DSP


The Agilent E1429A and E1429B digitizers are a C-size, 1-slot, message-based VXI modules. They make 12 bit, 20 MSa/s measurements, and contains two analog channels, memory, timebase, and data paths. The E1429A is functionally identical to the E1429B, except the E1429A does not support local bus.

Ideally suited for transient signals, the E1429A/E1429B arm/trigger circuits can be programmed to wait for the transient to occur. Up to 128 pre- and post-arm data sets can be stored in its segmentable memory. If power is lost, the E1429A/E1429B keeps the data intact in its non-volatile memory. Both message- and some register-based programming is supported by the E1429A/E1429B.

SCPI commands are used to program at a high level. Register-based reads and writes are supported for high-speed data-only access. An on-board voltage reference is used to verify that the E1429A/E1429B is operational. Attenuators, amplifiers, A/Ds, memory, timebase, and digital circuits are tested upon power-up and upon receipt of the *TST command. The normal path for retrieving data is the VXI data transfer bus.

Product Family: 56263

Important Notice: Please note that any additional items included with this equipment such as accessories, manuals, cables, calibration data, software, etc. are specifically listed in the above stock item description and/or displayed in the photos of the equipment. Please contact one of our Customer Support Specialists if you have any questions about what is included with this equipment or if you require any additional information.

Contact Us


Contact Us

Item Images

Click a thumbnail to view larger image:

Keysight / Agilent / HP E1429A / E1429B 20 MSa/s Digitizer

Contact Us

View It Live

View equipment LIVE - Before you buy!

InstraView™ Equipment Inspection

Buying used equipment doesn't always have to be a shot in the dark. We know there are plenty of differences when it comes to used equipment and quite often, choosing between different pieces is difficult, especially when the equipment is not sitting right in front of you.

Well, what if you were able to see a piece of equipment before you purchased it? Not just a picture from the manufacturer's website, but the actual piece of equipment you would receive.
With InstraView™, we move you one step closer to inspecting the equipment you're interested in without having to wait for the equipment to show up at your door.

InstraView™ works in your web browser and allows you to view the actual piece of equipment you're interested in before purchasing. You can zoom in close to see the labels with the serial number or zoom out to see the overall condition of the equipment.

It's like having the store come to you!

InstraView Request Form

To get started:

  1.   Fill in the request form below
  2.   We'll send you an email letting you know exactly when your piece of equipment will be available for viewing

Item to Inspect: 52401-1 - Keysight / Agilent E1429A 20 MSa/s Digitizer

All you need is a web browser (ie. Microsoft Internet Explorer or Netscape) and Sun's Java Runtime Environment installed. If you need to install the Sun Java Runtime, you may download the latest Java SE Runtime Environment (JRE)